@@ -16,6 +16,7 @@
#include <linux/mtd/rawnand.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#define COMMAND_REG 0x00
@@ -216,8 +217,7 @@ struct rnandc {
struct nand_controller controller;
struct device *dev;
void __iomem *regs;
- struct clk *hclk;
- struct clk *eclk;
+ unsigned long ext_clk_rate;
unsigned long assigned_cs;
struct list_head chips;
struct nand_chip *selected_chip;
@@ -891,7 +891,7 @@ static int rnandc_setup_interface(struct nand_chip *chip, int chipnr,
{
struct rnand_chip *rnand = to_rnand(chip);
struct rnandc *rnandc = to_rnandc(chip->controller);
- unsigned int period_ns = 1000000000 / clk_get_rate(rnandc->eclk);
+ unsigned int period_ns = 1000000000 / rnandc->ext_clk_rate;
const struct nand_sdr_timings *sdr;
unsigned int cyc, cle, ale, bef_dly, ca_to_data;
@@ -1319,6 +1319,7 @@ static int rnandc_chips_init(struct rnandc *rnandc)
static int rnandc_probe(struct platform_device *pdev)
{
struct rnandc *rnandc;
+ struct clk *eclk;
int irq, ret;
rnandc = devm_kzalloc(&pdev->dev, sizeof(*rnandc), GFP_KERNEL);
@@ -1335,29 +1336,10 @@ static int rnandc_probe(struct platform_device *pdev)
if (IS_ERR(rnandc->regs))
return PTR_ERR(rnandc->regs);
- /* APB clock */
- rnandc->hclk = devm_clk_get(&pdev->dev, "hclk");
- if (IS_ERR(rnandc->hclk))
- return PTR_ERR(rnandc->hclk);
-
- /* External NAND bus clock */
- rnandc->eclk = devm_clk_get(&pdev->dev, "eclk");
- if (IS_ERR(rnandc->eclk))
- return PTR_ERR(rnandc->eclk);
-
- ret = clk_prepare_enable(rnandc->hclk);
- if (ret)
- return ret;
-
- ret = clk_prepare_enable(rnandc->eclk);
- if (ret)
- goto disable_hclk;
-
rnandc_dis_interrupts(rnandc);
irq = platform_get_irq_optional(pdev, 0);
if (irq == -EPROBE_DEFER) {
- ret = irq;
- goto disable_eclk;
+ return irq;
} else if (irq < 0) {
dev_info(&pdev->dev, "No IRQ found, fallback to polling\n");
rnandc->use_polling = true;
@@ -1365,12 +1347,27 @@ static int rnandc_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, irq, rnandc_irq_handler, 0,
"renesas-nand-controller", rnandc);
if (ret < 0)
- goto disable_eclk;
+ return ret;
}
ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
- goto disable_eclk;
+ return ret;
+
+ devm_pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ /* The external NAND bus clock rate is needed for computing timings */
+ eclk = clk_get(&pdev->dev, "eclk");
+ if (IS_ERR(eclk)) {
+ ret = PTR_ERR(eclk);
+ goto dis_runtime_pm;
+ }
+
+ rnandc->ext_clk_rate = clk_get_rate(eclk);
+ clk_put(eclk);
rnandc_clear_fifo(rnandc);
@@ -1378,14 +1375,12 @@ static int rnandc_probe(struct platform_device *pdev)
ret = rnandc_chips_init(rnandc);
if (ret)
- goto disable_eclk;
+ goto dis_runtime_pm;
return 0;
-disable_eclk:
- clk_disable_unprepare(rnandc->eclk);
-disable_hclk:
- clk_disable_unprepare(rnandc->hclk);
+dis_runtime_pm:
+ pm_runtime_put(&pdev->dev);
return ret;
}
@@ -1396,8 +1391,7 @@ static int rnandc_remove(struct platform_device *pdev)
rnandc_chips_cleanup(rnandc);
- clk_disable_unprepare(rnandc->eclk);
- clk_disable_unprepare(rnandc->hclk);
+ pm_runtime_put(&pdev->dev);
return 0;
}
This NAND controller is part of a well defined power domain handled by the runtime PM core. Let's keep the harmony with the other RZ/N1 drivers and exclusively use the runtime PM API to enable/disable the clocks. We still need to retrieve the external clock rate in order to derive the NAND timings, but that is not a big deal, we can still do that in the probe and just save this value to reuse it later. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- .../mtd/nand/raw/renesas-nand-controller.c | 58 +++++++++---------- 1 file changed, 26 insertions(+), 32 deletions(-)