@@ -1842,32 +1842,32 @@ pil-reloc@94c {
camss: camss@ca00000 {
compatible = "qcom,sdm660-camss";
- reg = <0x0c824000 0x1000>,
+ reg = <0x0ca00020 0x10>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0c824000 0x1000>,
<0x0ca00120 0x4>,
<0x0c825000 0x1000>,
<0x0ca00124 0x4>,
<0x0c826000 0x1000>,
<0x0ca00128 0x4>,
- <0x0ca30000 0x100>,
- <0x0ca30400 0x100>,
- <0x0ca30800 0x100>,
- <0x0ca30c00 0x100>,
<0x0ca31000 0x500>,
- <0x0ca00020 0x10>,
<0x0ca10000 0x1000>,
<0x0ca14000 0x1000>;
- reg-names = "csiphy0",
+ reg-names = "csi_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
"csiphy1_clk_mux",
"csiphy2",
"csiphy2_clk_mux",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
"ispif",
- "csi_clk_mux",
"vfe0",
"vfe1";
interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
The CAMSS DTSI device node, which came after the bindings were merged, got the regs ordered differently then specified in the bindings: sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:0: 'csi_clk_mux' was expected Reordering them to match bindings should not cause ABI issues, because the driver relies on names, not ordering. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)