diff mbox

[V5,RESEND,1/3] docs: iommu: Documentation for iommu in hi6220 SoC

Message ID 1447986309-47548-2-git-send-email-puck.chen@hisilicon.com
State New
Headers show

Commit Message

Chen Feng Nov. 20, 2015, 2:25 a.m. UTC
Documentation for hi6220 iommu driver.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>

---
 .../bindings/iommu/hisi,hi6220-iommu.txt           | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring (Arm) Nov. 20, 2015, 2:21 p.m. UTC | #1
On Fri, Nov 20, 2015 at 10:25:07AM +0800, Chen Feng wrote:
> Documentation for hi6220 iommu driver.

> 

> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>


Acked-by: Rob Herring <robh@kernel.org>


> ---

>  .../bindings/iommu/hisi,hi6220-iommu.txt           | 32 ++++++++++++++++++++++

>  1 file changed, 32 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt

> 

> diff --git a/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt

> new file mode 100644

> index 0000000..44f9101

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt

> @@ -0,0 +1,32 @@

> +Hi6220 SoC SMMU Device Driver devicetree document

> +The media system shared the same smmu IP to access DDR memory. And all

> +media IP used the same page table.

> +

> +Below binding describes the system mmu for media system in hi6220 platform

> +

> +Required properties:

> +- compatible: should contain "hisilicon,hi6220-smmu".

> +- reg: A tuple of base address and size of System MMU registers.

> +- clocks: a list of phandle + clock-specifier pairs, one for each entry

> +  in clock-names.

> +- clock-names: should contain:

> +  * "smmu"

> +  * "media-sc"

> +  * "smmu-peri"

> +- interrupts: An interrupt specifier for interrupt signal of System MMU.

> +- #iommu-cells: The iommu-cells should be 0. Because no additional information

> +  needs to be encoded in the specifier.

> +

> +Examples:

> +	iommu@f4210000 {

> +		compatible = "hisilicon,hi6220-smmu";

> +		reg = <0x0 0xf4210000 0x0 0x1000>;

> +		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;

> +		clocks = <&sys_ctrl HI6220_MMU_CLK>,

> +		         <&media_ctrl HI6220_MED_MMU>,

> +		         <&sys_ctrl HI6220_MEDIA_PLL_SRC>;

> +		clock-names = "smmu",

> +			      "media-sc",

> +			      "smmu-peri";

> +		#iommu-cells = <0>;

> +	};

> -- 

> 1.9.1

> 

> --

> To unsubscribe from this list: send the line "unsubscribe devicetree" in

> the body of a message to majordomo@vger.kernel.org

> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
new file mode 100644
index 0000000..44f9101
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
@@ -0,0 +1,32 @@ 
+Hi6220 SoC SMMU Device Driver devicetree document
+The media system shared the same smmu IP to access DDR memory. And all
+media IP used the same page table.
+
+Below binding describes the system mmu for media system in hi6220 platform
+
+Required properties:
+- compatible: should contain "hisilicon,hi6220-smmu".
+- reg: A tuple of base address and size of System MMU registers.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: should contain:
+  * "smmu"
+  * "media-sc"
+  * "smmu-peri"
+- interrupts: An interrupt specifier for interrupt signal of System MMU.
+- #iommu-cells: The iommu-cells should be 0. Because no additional information
+  needs to be encoded in the specifier.
+
+Examples:
+	iommu@f4210000 {
+		compatible = "hisilicon,hi6220-smmu";
+		reg = <0x0 0xf4210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sys_ctrl HI6220_MMU_CLK>,
+		         <&media_ctrl HI6220_MED_MMU>,
+		         <&sys_ctrl HI6220_MEDIA_PLL_SRC>;
+		clock-names = "smmu",
+			      "media-sc",
+			      "smmu-peri";
+		#iommu-cells = <0>;
+	};