@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config DVB_DM1105
tristate "SDMC DM1105 based PCI cards"
- depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT
+ depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT && HAS_IOPORT
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
@@ -15,7 +15,7 @@ if RADIO_ADAPTERS
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select RADIO_TEA575X
help
Choose Y here if you have this radio card. This card may also be
@@ -232,6 +232,7 @@ source "drivers/media/radio/wl128x/Kconfig"
menuconfig V4L_RADIO_ISA_DRIVERS
bool "ISA radio devices"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for these ISA drivers.
@@ -240,6 +241,7 @@ if V4L_RADIO_ISA_DRIVERS
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -260,6 +262,7 @@ config RADIO_AZTECH_PORT
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
help
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -270,6 +273,7 @@ config RADIO_CADET
config RADIO_GEMTEK
tristate "GemTek Radio card (or compatible) support"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have this FM radio card, and then fill in the
@@ -309,6 +313,7 @@ config RADIO_GEMTEK_PROBE
config RADIO_ISA
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
tristate
config RADIO_MIROPCM20
@@ -329,6 +334,7 @@ config RADIO_MIROPCM20
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -383,6 +389,7 @@ config RADIO_RTRACK_PORT
config RADIO_SF16FMI
tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
help
Choose Y here if you have one of these FM radio cards.
@@ -392,6 +399,7 @@ config RADIO_SF16FMI
config RADIO_SF16FMR2
tristate "SF16-FMR2/SF16-FMD2 Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_TEA575X
help
Choose Y here if you have one of these FM radio cards.
@@ -402,6 +410,7 @@ config RADIO_SF16FMR2
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have this FM radio card.
@@ -416,6 +425,7 @@ config RADIO_TERRATEC
config RADIO_TRUST
tristate "Trust FM radio card"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
This is a driver for the Trust FM radio cards. Say Y if you have
@@ -439,6 +449,7 @@ config RADIO_TRUST_PORT
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -473,6 +484,7 @@ config RADIO_TYPHOON_PORT
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -148,6 +148,7 @@ if RC_DEVICES
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
@@ -161,6 +162,7 @@ config IR_ENE
config IR_FINTEK
tristate "Fintek Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Fintek. This chip is found on assorted
@@ -249,6 +251,7 @@ config IR_IMON_RAW
config IR_ITE_CIR
tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receivers
/transceivers made by ITE Tech Inc. These are found in
@@ -301,6 +304,7 @@ config IR_MTK
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Nuvoton (formerly Winbond). This chip is
@@ -345,6 +349,7 @@ config IR_RX51
config IR_SERIAL
tristate "Homebrew Serial Port Receiver"
+ depends on HAS_IOPORT
help
Say Y if you want to use Homebrew Serial Port Receivers and
Transceivers.
@@ -412,6 +417,7 @@ config IR_TTUSBIR
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
depends on (X86 && PNP) || COMPILE_TEST
+ depends on HAS_IOPORT
select NEW_LEDS
select LEDS_CLASS
select BITREVERSE
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> --- drivers/media/pci/dm1105/Kconfig | 2 +- drivers/media/radio/Kconfig | 14 +++++++++++++- drivers/media/rc/Kconfig | 6 ++++++ 3 files changed, 20 insertions(+), 2 deletions(-)