@@ -595,7 +595,8 @@
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
- clocks = <&clk IMX8MM_CLK_DUMMY>;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
@@ -604,8 +605,8 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
- <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>;
- clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
<&clk IMX8MM_CLK_PCIE1_CTRL>;
assigned-clock-rates = <10000000>, <250000000>;
Update the pcie bindings to the correct dt bindings: pcie_phy: - use pcie0_refclk - add required clock-names pcie: - remove pcie_phy clock as it comes from phy driver Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- v2: - update commit log - add required clock-names to pcie_phy node --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)