@@ -93,6 +93,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
struct vendor_data {
const u16 *reg_offset;
unsigned int ifls;
+ unsigned int fr_busy;
+ unsigned int fr_dsr;
+ unsigned int fr_cts;
+ unsigned int fr_ri;
bool access_32b;
bool oversampling;
bool dma_threshold;
@@ -111,6 +115,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.reg_offset = pl011_std_offsets,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
@@ -121,6 +129,10 @@ static struct vendor_data vendor_arm = {
static struct vendor_data vendor_sbsa = {
.reg_offset = pl011_std_offsets,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
@@ -163,6 +175,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.reg_offset = pl011_st_offsets,
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
@@ -191,7 +207,15 @@ static struct vendor_data vendor_zte = {
.reg_offset = pl011_zte_offsets,
.access_32b = true,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .get_fifosize = get_fifosize_arm,
+ .fr_busy = ZX_UART01x_FR_BUSY,
+ .fr_dsr = ZX_UART01x_FR_DSR,
+ .fr_cts = ZX_UART01x_FR_CTS,
+ .fr_ri = ZX_UART011_FR_RI,
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .always_enabled = false,
+ .fixed_options = false,
};
/* Deals with DMA transactions */
@@ -236,6 +260,10 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
+ unsigned int fr_busy; /* vendor-specific */
+ unsigned int fr_dsr; /* vendor-specific */
+ unsigned int fr_cts; /* vendor-specific */
+ unsigned int fr_ri; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
bool autorts;
bool access_32b;
@@ -1166,7 +1194,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_read(uap, REG_FR) & uap->fr_busy)
barrier();
spin_lock_irq(&uap->port.lock);
@@ -1415,11 +1443,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_DCD)
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
- if (delta & UART01x_FR_DSR)
+ if (delta & uap->fr_dsr)
uap->port.icount.dsr++;
- if (delta & UART01x_FR_CTS)
- uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+ if (delta & uap->fr_cts)
+ uart_handle_cts_change(&uap->port, status & uap->fr_cts);
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
@@ -1492,7 +1520,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int status = pl011_read(uap, REG_FR);
- return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ return status & (uap->fr_busy|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
static unsigned int pl011_get_mctrl(struct uart_port *port)
@@ -1507,9 +1535,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
result |= tiocmbit
TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
- TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
- TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
- TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+ TIOCMBIT(uap->fr_dsr, TIOCM_DSR);
+ TIOCMBIT(uap->fr_cts, TIOCM_CTS);
+ TIOCMBIT(uap->fr_ri, TIOCM_RNG);
#undef TIOCMBIT
return result;
}
@@ -2190,7 +2218,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
*/
do {
status = pl011_read(uap, REG_FR);
- } while (status & UART01x_FR_BUSY);
+ } while (status & uap->fr_busy);
if (!uap->vendor->always_enabled)
pl011_write(old_cr, uap, REG_CR);
@@ -2472,6 +2500,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->reg_offset = vendor->reg_offset;
uap->access_32b = vendor->access_32b;
uap->vendor = vendor;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
uap->fifosize = vendor->get_fifosize(dev);
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
@@ -2553,6 +2585,10 @@ static int sbsa_uart_probe(struct platform_device *pdev)
uap->reg_offset = vendor_sbsa.reg_offset;
uap->access_32b = vendor_sbsa.access_32b;
uap->vendor = &vendor_sbsa;
+ uap->fr_busy = vendor_sbsa.fr_busy;
+ uap->fr_dsr = vendor_sbsa.fr_dsr;
+ uap->fr_cts = vendor_sbsa.fr_cts;
+ uap->fr_ri = vendor_sbsa.fr_ri;
uap->fifosize = 32;
uap->port.irq = platform_get_irq(pdev, 0);
uap->port.ops = &sbsa_uart_pops;
@@ -2580,6 +2616,63 @@ static int sbsa_uart_remove(struct platform_device *pdev)
return 0;
}
+static int zx_uart_probe(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = &vendor_zte;
+ struct resource *res;
+ int portnr, ret;
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ uap->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto out;
+ }
+
+ uap->reg_offset = vendor->reg_offset;
+ uap->access_32b = vendor->access_32b;
+ uap->vendor = vendor;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
+ uap->fifosize = 16;
+ uap->port.irq = platform_get_irq(pdev, 0);
+ uap->port.ops = &amba_pl011_pops;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ret = pl011_setup_port(&pdev->dev, uap, res, portnr);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, uap);
+
+ return pl011_register_port(uap);
+out:
+ return ret;
+}
+
+static int zx_uart_remove(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+ pl011_unregister_port(uap);
+ return 0;
+}
+
static const struct of_device_id sbsa_uart_of_match[] = {
{ .compatible = "arm,sbsa-uart", },
{},
@@ -2628,18 +2721,38 @@ static struct amba_driver pl011_driver = {
.remove = pl011_remove,
};
+static const struct of_device_id zx_uart_dt_ids[] = {
+ { .compatible = "zte,zx296702-uart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zx_uart_dt_ids);
+
+static struct platform_driver zx_uart_driver = {
+ .driver = {
+ .name = "zx-uart",
+ .owner = THIS_MODULE,
+ .pm = &pl011_dev_pm_ops,
+ .of_match_table = zx_uart_dt_ids,
+ },
+ .probe = zx_uart_probe,
+ .remove = zx_uart_remove,
+};
+
static int __init pl011_init(void)
{
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
if (platform_driver_register(&arm_sbsa_uart_platform_driver))
pr_warn("could not register SBSA UART platform driver\n");
+ if (platform_driver_register(&zx_uart_driver))
+ pr_warn("could not register ZX UART platform driver\n");
return amba_driver_register(&pl011_driver);
}
static void __exit pl011_exit(void)
{
platform_driver_unregister(&arm_sbsa_uart_platform_driver);
+ platform_driver_unregister(&zx_uart_driver);
amba_driver_unregister(&pl011_driver);
}
@@ -103,6 +103,10 @@
#define UART01x_FR_DSR 0x002
#define UART01x_FR_CTS 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
+#define ZX_UART01x_FR_BUSY 0x300
+#define ZX_UART01x_FR_DSR 0x008
+#define ZX_UART01x_FR_CTS 0x002
+#define ZX_UART011_FR_RI 0x001
#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */
#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */
Add complete support for the ZTE UART to the AMBA PL011 driver based on Russell King's Nov 16's patch serial for preparing ZTE UART. ZTE UART is similar to the ARM and ST variants, except it has a different register address layout, some function bits layout and requires 32-bit accesses to the registers. Use the newly introduced register bit tables support to complete support for it. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/tty/serial/amba-pl011.c | 133 +++++++++++++++++++++++++++++++++++++--- include/linux/amba/serial.h | 4 ++ 2 files changed, 127 insertions(+), 10 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html