Message ID | 20220426134106.242353-6-fparent@baylibre.com |
---|---|
State | New |
Headers | show |
Series | [1/7] dt-bindings: usb: mediatek,mtu3: add binding for MT8195 SoC | expand |
On 27/04/2022 08:25, Macpaul Lin wrote: > On Tue, 2022-04-26 at 15:41 +0200, Fabien Parent wrote: >> Enable ethernet on the MT8195 demo board. >> >> Signed-off-by: Fabien Parent <fparent@baylibre.com> >> --- >> arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 108 >> +++++++++++++++++++ >> 1 file changed, 108 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts >> b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts >> index 08cab3b3943b..0b7985486e2a 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts >> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts >> @@ -80,6 +80,30 @@ optee_reserved: optee@43200000 { >> }; >> }; >> >> +ð { >> + phy-mode = "rgmii-rxid"; >> + phy-handle = <ð_phy>; >> + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; >> + snps,reset-delays-us = <0 10000 10000>; >> + mediatek,tx-delay-ps = <2030>; >> + pinctrl-names = "default", "sleep"; >> + pinctrl-0 = <ð_default_pins>; >> + pinctrl-1 = <ð_sleep_pins>; >> + status = "okay"; >> + >> + mdio { >> + compatible = "snps,dwmac-mdio"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + eth_phy: phy@1 { >> + compatible = "ethernet-phy-id001c.c916"; >> + #phy-cells = <0>; >> + reg = <0x1>; >> + }; >> + }; >> +}; >> + >> &i2c6 { >> clock-frequency = <400000>; >> pinctrl-0 = <&i2c6_pins>; >> @@ -260,6 +284,90 @@ &mt6359_vsram_others_ldo_reg { >> }; >> >> &pio { >> + eth_default_pins: eth-default-pins { >> + pins-cc { >> + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, >> + <PINMUX_GPIO88__FUNC_GBE_TXEN>, >> + <PINMUX_GPIO87__FUNC_GBE_RXDV>, >> + <PINMUX_GPIO86__FUNC_GBE_RXC>; >> + drive-strength = <MTK_DRIVE_8mA>; >> + }; >> + >> + pins-mdio { >> + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, >> + <PINMUX_GPIO90__FUNC_GBE_MDIO>; >> + input-enable; >> + }; >> + >> + pins-phy-reset { >> + pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; >> + }; >> + >> + pins-power { >> + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, >> + <PINMUX_GPIO92__FUNC_GPIO92>; >> + output-high; >> + }; >> + >> + pins-rxd { >> + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, >> + <PINMUX_GPIO82__FUNC_GBE_RXD2>, >> + <PINMUX_GPIO83__FUNC_GBE_RXD1>, >> + <PINMUX_GPIO84__FUNC_GBE_RXD0>; >> + }; >> + >> + pins-txd { >> + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, >> + <PINMUX_GPIO78__FUNC_GBE_TXD2>, >> + <PINMUX_GPIO79__FUNC_GBE_TXD1>, >> + <PINMUX_GPIO80__FUNC_GBE_TXD0>; >> + drive-strength = <MTK_DRIVE_8mA>; >> + }; >> + }; >> + >> + eth_sleep_pins: eth-sleep-pins { >> + pins-cc { >> + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, >> + <PINMUX_GPIO88__FUNC_GPIO88>, >> + <PINMUX_GPIO87__FUNC_GPIO87>, >> + <PINMUX_GPIO86__FUNC_GPIO86>; >> + }; >> + >> + pins-mdio { >> + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, >> + <PINMUX_GPIO90__FUNC_GPIO90>; >> + input-disable; >> + bias-disable; >> + }; >> + >> + pins-phy-reset { >> + pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; >> + input-disable; >> + bias-disable; >> + }; >> + >> + pins-power { >> + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, >> + <PINMUX_GPIO92__FUNC_GPIO92>; >> + input-disable; >> + bias-disable; >> + }; >> + >> + pins-rxd { >> + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, >> + <PINMUX_GPIO82__FUNC_GPIO82>, >> + <PINMUX_GPIO83__FUNC_GPIO83>, >> + <PINMUX_GPIO84__FUNC_GPIO84>; >> + }; >> + >> + pins-txd { >> + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, >> + <PINMUX_GPIO78__FUNC_GPIO78>, >> + <PINMUX_GPIO79__FUNC_GPIO79>, >> + <PINMUX_GPIO80__FUNC_GPIO80>; >> + }; >> + }; >> + >> gpio_keys_pins: gpio-keys-pins { >> pins { >> pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; > > Tested-by: Macpaul Lin <macpaul.lin@mediatek.com> > I get the following error: Error: arch/arm64/boot/dts/mediatek/mt8195.dtsi:582.26-27 syntax error How did you test? Regards, Matthias
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index 08cab3b3943b..0b7985486e2a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -80,6 +80,30 @@ optee_reserved: optee@43200000 { }; }; +ð { + phy-mode = "rgmii-rxid"; + phy-handle = <ð_phy>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: phy@1 { + compatible = "ethernet-phy-id001c.c916"; + #phy-cells = <0>; + reg = <0x1>; + }; + }; +}; + &i2c6 { clock-frequency = <400000>; pinctrl-0 = <&i2c6_pins>; @@ -260,6 +284,90 @@ &mt6359_vsram_others_ldo_reg { }; &pio { + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO86__FUNC_GBE_RXC>; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + + pins-phy-reset { + pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; + }; + + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO88__FUNC_GPIO88>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO86__FUNC_GPIO86>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + + pins-phy-reset { + pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; + input-disable; + bias-disable; + }; + + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + }; + gpio_keys_pins: gpio-keys-pins { pins { pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
Enable ethernet on the MT8195 demo board. Signed-off-by: Fabien Parent <fparent@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 108 +++++++++++++++++++ 1 file changed, 108 insertions(+)