@@ -1248,6 +1248,7 @@ config SENSORS_LM75
temperature sensor chip, with models including:
- Analog Devices ADT75
+ - Atmel (now Microchip) AT30TS74
- Dallas Semiconductor DS75, DS1775 and DS7505
- Global Mixed-mode Technology (GMT) G751
- Maxim MAX6625 and MAX6626
@@ -26,6 +26,7 @@
enum lm75_type { /* keep sorted in alphabetical order */
adt75,
+ at30ts74,
ds1775,
ds75,
ds7505,
@@ -128,6 +129,14 @@ static const struct lm75_params device_params[] = {
.default_resolution = 12,
.default_sample_time = MSEC_PER_SEC / 10,
},
+ [at30ts74] = {
+ .set_mask = 3 << 5, /* 12-bit mode*/
+ .default_resolution = 12,
+ .default_sample_time = 200,
+ .num_sample_times = 4,
+ .sample_times = (unsigned int []){ 25, 50, 100, 200 },
+ .resolutions = (u8 []) {9, 10, 11, 12 },
+ },
[ds1775] = {
.clr_mask = 3 << 5,
.set_mask = 2 << 5, /* 11-bit mode */
@@ -645,6 +654,7 @@ static int lm75_probe(struct i2c_client *client)
static const struct i2c_device_id lm75_ids[] = {
{ "adt75", adt75, },
+ { "at30ts74", at30ts74, },
{ "ds1775", ds1775, },
{ "ds75", ds75, },
{ "ds7505", ds7505, },
@@ -680,6 +690,10 @@ static const struct of_device_id __maybe_unused lm75_of_match[] = {
.compatible = "adi,adt75",
.data = (void *)adt75
},
+ {
+ .compatible = "atmel,at30ts74",
+ .data = (void *)at30ts74
+ },
{
.compatible = "dallas,ds1775",
.data = (void *)ds1775
Atmel (now Microchip) AT30TS74 is an LM75 compatible sensor. Add it. Signed-off-by: Peter Rosin <peda@axentia.se> --- drivers/hwmon/Kconfig | 1 + drivers/hwmon/lm75.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+)