diff mbox series

[V5,1/2] arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth

Message ID 1650439639-28428-2-git-send-email-quic_vnivarth@quicinc.com
State New
Headers show
Series arm64: dts: qcom: Configure CTS pin to bias-bus-hold for bluetooth | expand

Commit Message

Vijaya Krishna Nivarthi April 20, 2022, 7:27 a.m. UTC 
WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change active and sleep pinctrl configurations to handle same.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
v5: modify subject to include bluetooth
v4: modify subject of patch to indicate file it is applying to
v3: apply same change to active state and other sc7280*.dts* as well
v2: used bias-bus-hold as per review comments
v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 015a347..85e7467 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -400,10 +400,10 @@ 
 
 &qup_uart7_cts {
 	/*
-	 * Configure a pull-down on CTS to match the pull of
-	 * the Bluetooth module.
+	 * Configure a bias-bus-hold on CTS to lower power usage
+	 * when BT is turned off.
 	 */
-	bias-pull-down;
+	bias-bus-hold;
 };
 
 &qup_uart7_rts {
@@ -495,10 +495,10 @@ 
 		pins = "gpio28";
 		function = "gpio";
 		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
+		 * Configure a bias-bus-hold on CTS to lower power usage
+		 * when BT is turned off.
 		 */
-		bias-pull-down;
+		bias-bus-hold;
 	};
 
 	qup_uart7_sleep_rts: qup-uart7-sleep-rts {