@@ -2982,6 +2982,16 @@ static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah)
return 0;
}
+static struct ar9300_base_eep_hdr *ar9003_base_header(struct ath_hw *ah)
+{
+ return &ah->eeprom.ar9300_eep.baseEepHeader;
+}
+
+static struct ar9300_BaseExtension_1 *ar9003_base_ext1(struct ath_hw *ah)
+{
+ return &ah->eeprom.ar9300_eep.base_ext1;
+}
+
static struct ar9300_modal_eep_header *ar9003_modal_header(struct ath_hw *ah,
bool is2ghz)
{
@@ -2993,6 +3003,105 @@ static struct ar9300_modal_eep_header *ar9003_modal_header(struct ath_hw *ah,
return &eep->modalHeader5G;
}
+static int8_t ar9003_ant_gain(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->antennaGain;
+}
+
+static u8 ar9003_cal_freq_pier(struct ath_hw *ah, int idx, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calFreqPier2G[idx] : eep->calFreqPier5G[idx];
+}
+
+static struct ar9300_cal_data_per_freq_op_loop *
+ar9003_cal_pier_data(struct ath_hw *ah, int chain, int idx, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? &eep->calPierData2G[chain][idx] :
+ &eep->calPierData5G[chain][idx];
+}
+
+static u8 ar9003_cal_target_freqbin(struct ath_hw *ah, int idx, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calTarget_freqbin_2G[idx] :
+ eep->calTarget_freqbin_5G[idx];
+}
+
+static u8 ar9003_cal_target_freqbin_cck(struct ath_hw *ah, int idx)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return eep->calTarget_freqbin_Cck[idx];
+}
+
+static u8 ar9003_cal_target_freqbin_ht20(struct ath_hw *ah, int idx,
+ bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calTarget_freqbin_2GHT20[idx] :
+ eep->calTarget_freqbin_5GHT20[idx];
+}
+
+static u8 ar9003_cal_target_freqbin_ht40(struct ath_hw *ah, int idx,
+ bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calTarget_freqbin_2GHT40[idx] :
+ eep->calTarget_freqbin_5GHT40[idx];
+}
+
+static u8 ar9003_cal_target_power(struct ath_hw *ah, int idx, int rateIndex,
+ bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calTargetPower2G[idx].tPow2x[rateIndex] :
+ eep->calTargetPower5G[idx].tPow2x[rateIndex];
+}
+
+static u8 ar9003_cal_target_power_cck(struct ath_hw *ah, int idx, int rateIndex)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return eep->calTargetPowerCck[idx].tPow2x[rateIndex];
+}
+
+static u8 ar9003_cal_target_power_ht20(struct ath_hw *ah, int idx,
+ int rateIndex, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calTargetPower2GHT20[idx].tPow2x[rateIndex] :
+ eep->calTargetPower5GHT20[idx].tPow2x[rateIndex];
+}
+
+static u8 ar9003_cal_target_power_ht40(struct ath_hw *ah, int idx,
+ int rateIndex, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->calTargetPower2GHT40[idx].tPow2x[rateIndex] :
+ eep->calTargetPower5GHT40[idx].tPow2x[rateIndex];
+}
+
+static u8 ar9003_ctl_freqbin(struct ath_hw *ah, int idx, int edge, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->ctl_freqbin_2G[idx][edge] :
+ eep->ctl_freqbin_5G[idx][edge];
+}
+
+static u8 ar9003_ctl_index(struct ath_hw *ah, int idx, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->ctlIndex_2G[idx] : eep->ctlIndex_5G[idx];
+}
+
+static u8 ar9003_ctl_power_data(struct ath_hw *ah, int idx, int edge,
+ bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ return is2ghz ? eep->ctlPowerData_2G[idx].ctlEdges[edge] :
+ eep->ctlPowerData_5G[idx].ctlEdges[edge];
+}
+
static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, int chain,
bool is2ghz)
{
@@ -3010,6 +3119,87 @@ u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz)
return le32_to_cpu(ar9003_modal_header(ah, is2ghz)->antCtrlCommon2);
}
+static int8_t ar9003_noise_floor_thres(struct ath_hw *ah, int chain,
+ bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->noiseFloorThreshCh[chain];
+}
+
+static int8_t ar9003_quick_drop(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->quick_drop;
+}
+
+static int8_t ar9003_temp_slope(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->tempSlope;
+}
+
+static int8_t ar9003_temp_slope_high(struct ath_hw *ah)
+{
+ return ah->eeprom.ar9300_eep.base_ext2.tempSlopeHigh;
+}
+
+static int8_t ar9003_temp_slope_low(struct ath_hw *ah)
+{
+ return ah->eeprom.ar9300_eep.base_ext2.tempSlopeLow;
+}
+
+static u8 ar9003_tx_end_to_xpa_off(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->txEndToXpaOff;
+}
+
+static u8 ar9003_tx_frame_to_xpa_on(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->txFrameToXpaOn;
+}
+
+static u8 ar9003_xatten1_db_high(struct ath_hw *ah, int chain)
+{
+ return ah->eeprom.ar9300_eep.base_ext2.xatten1DBHigh[chain];
+}
+
+static u8 ar9003_xatten1_db_low(struct ath_hw *ah, int chain)
+{
+ return ah->eeprom.ar9300_eep.base_ext2.xatten1DBLow[chain];
+}
+
+static u8 ar9003_xatten1_db_margin_high(struct ath_hw *ah, int chain)
+{
+ return ah->eeprom.ar9300_eep.base_ext2.xatten1MarginHigh[chain];
+}
+
+static u8 ar9003_xatten1_db_margin_low(struct ath_hw *ah, int chain)
+{
+ return ah->eeprom.ar9300_eep.base_ext2.xatten1MarginLow[chain];
+}
+
+static u8 ar9003_xatten1_db(struct ath_hw *ah, int chain, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->xatten1DB[chain];
+}
+
+static u8 ar9003_xatten1_margin(struct ath_hw *ah, int chain, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->xatten1Margin[chain];
+}
+
+static u8 ar9003_xlna_bias_strength(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->xlna_bias_strength;
+}
+
+static u8 ar9003_xpa_bias_lvl(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->xpaBiasLvl;
+}
+
+static u8 *ar9003_mac_addr(struct ath_hw *ah)
+{
+ return ah->eeprom.ar9300_eep.macAddr;
+}
+
static u16 ar9003_switch_com_spdt_get(struct ath_hw *ah, bool is2ghz)
{
return le16_to_cpu(ar9003_modal_header(ah, is2ghz)->switchcomspdt);
@@ -3018,16 +3208,17 @@ static u16 ar9003_switch_com_spdt_get(struct ath_hw *ah, bool is2ghz)
static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
enum eeprom_param param)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
+ struct ar9300_BaseExtension_1 *base_ext1 = ar9003_base_ext1(ah);
+ u8 *mac_addr = ar9003_mac_addr(ah);
switch (param) {
case EEP_MAC_LSW:
- return get_unaligned_be16(eep->macAddr);
+ return get_unaligned_be16(mac_addr);
case EEP_MAC_MID:
- return get_unaligned_be16(eep->macAddr + 2);
+ return get_unaligned_be16(mac_addr + 2);
case EEP_MAC_MSW:
- return get_unaligned_be16(eep->macAddr + 4);
+ return get_unaligned_be16(mac_addr + 4);
case EEP_REG_0:
return le16_to_cpu(pBase->regDmn[0]);
case EEP_OP_CAP:
@@ -3048,11 +3239,11 @@ static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
if (AR_SREV_9565(ah))
return AR9300_EEP_ANTDIV_CONTROL_DEFAULT_VALUE;
else
- return eep->base_ext1.ant_div_control;
+ return base_ext1->ant_div_control;
case EEP_ANTENNA_GAIN_5G:
- return eep->modalHeader5G.antennaGain;
+ return ar9003_ant_gain(ah, /*is2ghz=*/false);
case EEP_ANTENNA_GAIN_2G:
- return eep->modalHeader2G.antennaGain;
+ return ar9003_ant_gain(ah, /*is2ghz=*/true);
default:
return 0;
}
@@ -3444,40 +3635,79 @@ static bool ath9k_hw_ar9300_fill_eeprom(struct ath_hw *ah)
}
#if defined(CONFIG_ATH9K_DEBUGFS) || defined(CONFIG_ATH9K_HTC_DEBUGFS)
-static u32 ar9003_dump_modal_eeprom(char *buf, u32 len, u32 size,
- struct ar9300_modal_eep_header *modal_hdr)
+
+static int8_t ar9003_adc_desired_size(struct ath_hw *ah, bool is2ghz)
{
- PR_EEP("Chain0 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[0]));
- PR_EEP("Chain1 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[1]));
- PR_EEP("Chain2 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[2]));
- PR_EEP("Ant. Common Control", le32_to_cpu(modal_hdr->antCtrlCommon));
- PR_EEP("Ant. Common Control2", le32_to_cpu(modal_hdr->antCtrlCommon2));
- PR_EEP("Ant. Gain", modal_hdr->antennaGain);
- PR_EEP("Switch Settle", modal_hdr->switchSettling);
- PR_EEP("Chain0 xatten1DB", modal_hdr->xatten1DB[0]);
- PR_EEP("Chain1 xatten1DB", modal_hdr->xatten1DB[1]);
- PR_EEP("Chain2 xatten1DB", modal_hdr->xatten1DB[2]);
- PR_EEP("Chain0 xatten1Margin", modal_hdr->xatten1Margin[0]);
- PR_EEP("Chain1 xatten1Margin", modal_hdr->xatten1Margin[1]);
- PR_EEP("Chain2 xatten1Margin", modal_hdr->xatten1Margin[2]);
- PR_EEP("Temp Slope", modal_hdr->tempSlope);
- PR_EEP("Volt Slope", modal_hdr->voltSlope);
- PR_EEP("spur Channels0", modal_hdr->spurChans[0]);
- PR_EEP("spur Channels1", modal_hdr->spurChans[1]);
- PR_EEP("spur Channels2", modal_hdr->spurChans[2]);
- PR_EEP("spur Channels3", modal_hdr->spurChans[3]);
- PR_EEP("spur Channels4", modal_hdr->spurChans[4]);
- PR_EEP("Chain0 NF Threshold", modal_hdr->noiseFloorThreshCh[0]);
- PR_EEP("Chain1 NF Threshold", modal_hdr->noiseFloorThreshCh[1]);
- PR_EEP("Chain2 NF Threshold", modal_hdr->noiseFloorThreshCh[2]);
- PR_EEP("Quick Drop", modal_hdr->quick_drop);
- PR_EEP("txEndToXpaOff", modal_hdr->txEndToXpaOff);
- PR_EEP("xPA Bias Level", modal_hdr->xpaBiasLvl);
- PR_EEP("txFrameToDataStart", modal_hdr->txFrameToDataStart);
- PR_EEP("txFrameToPaOn", modal_hdr->txFrameToPaOn);
- PR_EEP("txFrameToXpaOn", modal_hdr->txFrameToXpaOn);
- PR_EEP("txClip", modal_hdr->txClip);
- PR_EEP("ADC Desired size", modal_hdr->adcDesiredSize);
+ return ar9003_modal_header(ah, is2ghz)->adcDesiredSize;
+}
+
+static u8 ar9003_switch_settling(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->switchSettling;
+}
+
+static u8 ar9003_tx_clip(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->txClip;
+}
+
+static u8 ar9003_tx_frame_to_data_start(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->txFrameToDataStart;
+}
+
+static u8 ar9003_tx_frame_to_pa_on(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->txFrameToPaOn;
+}
+
+static int8_t ar9003_volt_slope(struct ath_hw *ah, bool is2ghz)
+{
+ return ar9003_modal_header(ah, is2ghz)->voltSlope;
+}
+
+static u32 ar9003_dump_modal_eeprom(struct ath_hw *ah, char *buf, u32 len,
+ u32 size, bool is_2g)
+{
+ PR_EEP("Chain0 Ant. Control",
+ ar9003_hw_ant_ctrl_chain_get(ah, 0, is_2g));
+ PR_EEP("Chain1 Ant. Control",
+ ar9003_hw_ant_ctrl_chain_get(ah, 1, is_2g));
+ PR_EEP("Chain2 Ant. Control",
+ ar9003_hw_ant_ctrl_chain_get(ah, 2, is_2g));
+ PR_EEP("Ant. Common Control", ar9003_hw_ant_ctrl_common_get(ah, is_2g));
+ PR_EEP("Ant. Common Control2",
+ ar9003_hw_ant_ctrl_common_2_get(ah, is_2g));
+ PR_EEP("Ant. Gain", ar9003_ant_gain(ah, is_2g));
+ PR_EEP("Switch Settle", ar9003_switch_settling(ah, is_2g));
+ PR_EEP("Chain0 xatten1DB", ar9003_xatten1_db(ah, 0, is_2g));
+ PR_EEP("Chain1 xatten1DB", ar9003_xatten1_db(ah, 1, is_2g));
+ PR_EEP("Chain2 xatten1DB", ar9003_xatten1_db(ah, 2, is_2g));
+ PR_EEP("Chain0 xatten1Margin", ar9003_xatten1_margin(ah, 0, is_2g));
+ PR_EEP("Chain1 xatten1Margin", ar9003_xatten1_margin(ah, 1, is_2g));
+ PR_EEP("Chain2 xatten1Margin", ar9003_xatten1_margin(ah, 2, is_2g));
+ PR_EEP("Temp Slope", ar9003_temp_slope(ah, is_2g));
+ PR_EEP("Volt Slope", ar9003_volt_slope(ah, is_2g));
+ PR_EEP("spur Channels0", ar9003_get_spur_chan_ptr(ah, is_2g)[0]);
+ PR_EEP("spur Channels1", ar9003_get_spur_chan_ptr(ah, is_2g)[1]);
+ PR_EEP("spur Channels2", ar9003_get_spur_chan_ptr(ah, is_2g)[2]);
+ PR_EEP("spur Channels3", ar9003_get_spur_chan_ptr(ah, is_2g)[3]);
+ PR_EEP("spur Channels4", ar9003_get_spur_chan_ptr(ah, is_2g)[4]);
+ PR_EEP("Chain0 NF Threshold",
+ ar9003_noise_floor_thres(ah, 0, is_2g));
+ PR_EEP("Chain1 NF Threshold",
+ ar9003_noise_floor_thres(ah, 1, is_2g));
+ PR_EEP("Chain2 NF Threshold",
+ ar9003_noise_floor_thres(ah, 2, is_2g));
+ PR_EEP("Quick Drop", ar9003_quick_drop(ah, is_2g));
+ PR_EEP("txEndToXpaOff", ar9003_tx_end_to_xpa_off(ah, is_2g));
+ PR_EEP("xPA Bias Level", ar9003_xpa_bias_lvl(ah, is_2g));
+ PR_EEP("txFrameToDataStart",
+ ar9003_tx_frame_to_data_start(ah, is_2g));
+ PR_EEP("txFrameToPaOn", ar9003_tx_frame_to_pa_on(ah, is_2g));
+ PR_EEP("txFrameToXpaOn", ar9003_tx_frame_to_xpa_on(ah, is_2g));
+ PR_EEP("txClip", ar9003_tx_clip(ah, is_2g));
+ PR_EEP("ADC Desired size", ar9003_adc_desired_size(ah, is_2g));
return len;
}
@@ -3485,15 +3715,12 @@ static u32 ar9003_dump_modal_eeprom(char *buf, u32 len, u32 size,
static u32 ar9003_dump_cal_data(struct ath_hw *ah, char *buf, u32 len, u32 size,
bool is_2g)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
struct ar9300_cal_data_per_freq_op_loop *cal_pier;
int cal_pier_nr;
int freq;
int i, j;
- pBase = &eep->baseEepHeader;
-
if (is_2g)
cal_pier_nr = AR9300_NUM_2G_CAL_PIERS;
else
@@ -3509,12 +3736,11 @@ static u32 ar9003_dump_cal_data(struct ath_hw *ah, char *buf, u32 len, u32 size,
"Freq\t ref\tvolt\ttemp\tnf_cal\tnf_pow\trx_temp\n");
for (j = 0; j < cal_pier_nr; j++) {
+ cal_pier = ar9003_cal_pier_data(ah, i, j, is_2g);
if (is_2g) {
- cal_pier = &eep->calPierData2G[i][j];
- freq = 2300 + eep->calFreqPier2G[j];
+ freq = 2300 + ar9003_cal_freq_pier(ah, j, is_2g);
} else {
- cal_pier = &eep->calPierData5G[i][j];
- freq = 4800 + eep->calFreqPier5G[j] * 5;
+ freq = 4800 + ar9003_cal_freq_pier(ah, j, is_2g) * 5;
}
len += scnprintf(buf + len, size - len,
@@ -3539,22 +3765,19 @@ static u32 ar9003_dump_cal_data(struct ath_hw *ah, char *buf, u32 len, u32 size,
static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
u8 *buf, u32 len, u32 size)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
if (!dump_base_hdr) {
len += scnprintf(buf + len, size - len,
"%20s :\n", "2GHz modal Header");
- len = ar9003_dump_modal_eeprom(buf, len, size,
- &eep->modalHeader2G);
+ len = ar9003_dump_modal_eeprom(ah, buf, len, size, true);
len += scnprintf(buf + len, size - len, "Calibration data\n");
len = ar9003_dump_cal_data(ah, buf, len, size, true);
len += scnprintf(buf + len, size - len,
"%20s :\n", "5GHz modal Header");
- len = ar9003_dump_modal_eeprom(buf, len, size,
- &eep->modalHeader5G);
+ len = ar9003_dump_modal_eeprom(ah, buf, len, size, false);
len += scnprintf(buf + len, size - len, "Calibration data\n");
len = ar9003_dump_cal_data(ah, buf, len, size, false);
@@ -3562,9 +3785,7 @@ static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
goto out;
}
- pBase = &eep->baseEepHeader;
-
- PR_EEP("EEPROM Version", ah->eeprom.ar9300_eep.eepromVersion);
+ PR_EEP("EEPROM Version", ath9k_hw_ar9300_get_eeprom_ver(ah));
PR_EEP("RegDomain1", le16_to_cpu(pBase->regDmn[0]));
PR_EEP("RegDomain2", le16_to_cpu(pBase->regDmn[1]));
PR_EEP("TX Mask", (pBase->txrxMask >> 4));
@@ -3608,7 +3829,7 @@ static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
PR_EEP("SW Reg", le32_to_cpu(pBase->swreg));
len += scnprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress",
- ah->eeprom.ar9300_eep.macAddr);
+ ar9003_mac_addr(ah));
out:
if (len > size)
len = size;
@@ -3625,7 +3846,7 @@ static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
{
- int bias = ar9003_modal_header(ah, is2ghz)->xpaBiasLvl;
+ int bias = ar9003_xpa_bias_lvl(ah, is2ghz);
if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah) ||
AR_SREV_9531(ah) || AR_SREV_9561(ah))
@@ -3798,8 +4019,7 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
int drive_strength;
unsigned long reg;
@@ -3843,23 +4063,23 @@ static u16 ar9003_hw_atten_chain_get(struct ath_hw *ah, int chain,
{
int f[3], t[3];
u16 value;
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ bool is2ghz = IS_CHAN_2GHZ(chan);
if (chain >= 0 && chain < 3) {
- if (IS_CHAN_2GHZ(chan))
- return eep->modalHeader2G.xatten1DB[chain];
- else if (eep->base_ext2.xatten1DBLow[chain] != 0) {
- t[0] = eep->base_ext2.xatten1DBLow[chain];
+ if (is2ghz)
+ return ar9003_xatten1_db(ah, chain, is2ghz);
+ else if (ar9003_xatten1_db_low(ah, chain) != 0) {
+ t[0] = ar9003_xatten1_db_low(ah, chain);
f[0] = 5180;
- t[1] = eep->modalHeader5G.xatten1DB[chain];
+ t[1] = ar9003_xatten1_db(ah, chain, is2ghz);
f[1] = 5500;
- t[2] = eep->base_ext2.xatten1DBHigh[chain];
+ t[2] = ar9003_xatten1_db_high(ah, chain);
f[2] = 5785;
value = ar9003_hw_power_interpolate((s32) chan->channel,
f, t, 3);
return value;
} else
- return eep->modalHeader5G.xatten1DB[chain];
+ return ar9003_xatten1_db(ah, chain, is2ghz);
}
return 0;
@@ -3871,23 +4091,23 @@ static u16 ar9003_hw_atten_chain_get_margin(struct ath_hw *ah, int chain,
{
int f[3], t[3];
u16 value;
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ bool is2ghz = IS_CHAN_2GHZ(chan);
if (chain >= 0 && chain < 3) {
- if (IS_CHAN_2GHZ(chan))
- return eep->modalHeader2G.xatten1Margin[chain];
- else if (eep->base_ext2.xatten1MarginLow[chain] != 0) {
- t[0] = eep->base_ext2.xatten1MarginLow[chain];
+ if (is2ghz)
+ return ar9003_xatten1_margin(ah, chain, is2ghz);
+ else if (ar9003_xatten1_db_margin_low(ah, chain) != 0) {
+ t[0] = ar9003_xatten1_db_margin_low(ah, chain);
f[0] = 5180;
- t[1] = eep->modalHeader5G.xatten1Margin[chain];
+ t[1] = ar9003_xatten1_margin(ah, chain, is2ghz);
f[1] = 5500;
- t[2] = eep->base_ext2.xatten1MarginHigh[chain];
+ t[2] = ar9003_xatten1_db_margin_high(ah, chain);
f[2] = 5785;
value = ar9003_hw_power_interpolate((s32) chan->channel,
f, t, 3);
return value;
} else
- return eep->modalHeader5G.xatten1Margin[chain];
+ return ar9003_xatten1_margin(ah, chain, is2ghz);
}
return 0;
@@ -3955,8 +4175,7 @@ static bool is_pmu_set(struct ath_hw *ah, u32 pmu_reg, int pmu_set)
void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
u32 reg_val;
if (pBase->featureEnable & BIT(4)) {
@@ -4050,13 +4269,13 @@ void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- u8 tuning_caps_param = eep->baseEepHeader.params_for_tuning_caps[0];
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
+ u8 tuning_caps_param = pBase->params_for_tuning_caps[0];
if (AR_SREV_9340(ah) || AR_SREV_9531(ah))
return;
- if (eep->baseEepHeader.featureEnable & 0x40) {
+ if (pBase->featureEnable & 0x40) {
tuning_caps_param &= 0x7f;
REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPINDAC,
tuning_caps_param);
@@ -4067,21 +4286,22 @@ static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah)
static void ar9003_hw_quick_drop_apply(struct ath_hw *ah, u16 freq)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
+ struct ar9300_BaseExtension_1 *base_ext1 = ar9003_base_ext1(ah);
int quick_drop;
s32 t[3], f[3] = {5180, 5500, 5785};
+ bool is2ghz = freq < 4000;
if (!(pBase->miscConfiguration & BIT(4)))
return;
if (AR_SREV_9300(ah) || AR_SREV_9580(ah) || AR_SREV_9340(ah)) {
- if (freq < 4000) {
- quick_drop = eep->modalHeader2G.quick_drop;
+ if (is2ghz) {
+ quick_drop = ar9003_quick_drop(ah, is2ghz);
} else {
- t[0] = eep->base_ext1.quick_drop_low;
- t[1] = eep->modalHeader5G.quick_drop;
- t[2] = eep->base_ext1.quick_drop_high;
+ t[0] = base_ext1->quick_drop_low;
+ t[1] = ar9003_quick_drop(ah, is2ghz);
+ t[2] = base_ext1->quick_drop_high;
quick_drop = ar9003_hw_power_interpolate(freq, f, t, 3);
}
REG_RMW_FIELD(ah, AR_PHY_AGC, AR_PHY_AGC_QUICK_DROP, quick_drop);
@@ -4092,7 +4312,7 @@ static void ar9003_hw_txend_to_xpa_off_apply(struct ath_hw *ah, bool is2ghz)
{
u32 value;
- value = ar9003_modal_header(ah, is2ghz)->txEndToXpaOff;
+ value = ar9003_tx_end_to_xpa_off(ah, is2ghz);
REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL,
AR_PHY_XPA_TIMING_CTL_TX_END_XPAB_OFF, value);
@@ -4102,10 +4322,10 @@ static void ar9003_hw_txend_to_xpa_off_apply(struct ath_hw *ah, bool is2ghz)
static void ar9003_hw_xpa_timing_control_apply(struct ath_hw *ah, bool is2ghz)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
u8 xpa_ctl;
- if (!(eep->baseEepHeader.featureEnable & 0x80))
+ if (!(pBase->featureEnable & 0x80))
return;
if (!AR_SREV_9300(ah) &&
@@ -4116,7 +4336,7 @@ static void ar9003_hw_xpa_timing_control_apply(struct ath_hw *ah, bool is2ghz)
!AR_SREV_5502(ah))
return;
- xpa_ctl = ar9003_modal_header(ah, is2ghz)->txFrameToXpaOn;
+ xpa_ctl = ar9003_tx_frame_to_xpa_on(ah, is2ghz);
if (is2ghz)
REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL,
AR_PHY_XPA_TIMING_CTL_FRAME_XPAB_ON, xpa_ctl);
@@ -4127,16 +4347,16 @@ static void ar9003_hw_xpa_timing_control_apply(struct ath_hw *ah, bool is2ghz)
static void ar9003_hw_xlna_bias_strength_apply(struct ath_hw *ah, bool is2ghz)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
u8 bias;
- if (!(eep->baseEepHeader.miscConfiguration & 0x40))
+ if (!(pBase->miscConfiguration & 0x40))
return;
if (!AR_SREV_9300(ah))
return;
- bias = ar9003_modal_header(ah, is2ghz)->xlna_bias_strength;
+ bias = ar9003_xlna_bias_strength(ah, is2ghz);
REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS,
bias & 0x3);
bias >>= 2;
@@ -4149,8 +4369,7 @@ static void ar9003_hw_xlna_bias_strength_apply(struct ath_hw *ah, bool is2ghz)
static int ar9003_hw_get_thermometer(struct ath_hw *ah)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
int thermometer = (pBase->miscConfiguration >> 1) & 0x3;
return --thermometer;
@@ -4208,7 +4427,7 @@ static void ar9003_hw_thermo_cal_apply(struct ath_hw *ah)
static void ar9003_hw_apply_minccapwr_thresh(struct ath_hw *ah,
bool is2ghz)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_BaseExtension_1 *base_ext1 = ar9003_base_ext1(ah);
const u_int32_t cca_ctrl[AR9300_MAX_CHAINS] = {
AR_PHY_CCA_CTRL_0,
AR_PHY_CCA_CTRL_1,
@@ -4218,10 +4437,10 @@ static void ar9003_hw_apply_minccapwr_thresh(struct ath_hw *ah,
u32 val;
if (is2ghz) {
- if (!(eep->base_ext1.misc_enable & BIT(2)))
+ if (!(base_ext1->misc_enable & BIT(2)))
return;
} else {
- if (!(eep->base_ext1.misc_enable & BIT(3)))
+ if (!(base_ext1->misc_enable & BIT(3)))
return;
}
@@ -4229,7 +4448,7 @@ static void ar9003_hw_apply_minccapwr_thresh(struct ath_hw *ah,
if (!(ah->caps.tx_chainmask & BIT(chain)))
continue;
- val = ar9003_modal_header(ah, is2ghz)->noiseFloorThreshCh[chain];
+ val = ar9003_noise_floor_thres(ah, chain, is2ghz);
REG_RMW_FIELD(ah, cca_ctrl[chain],
AR_PHY_EXT_CCA0_THRESH62_1, val);
}
@@ -4330,18 +4549,11 @@ static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah,
u16 numPiers, i;
s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS];
s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS];
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct cal_tgt_pow_legacy *pEepromTargetPwr;
- u8 *pFreqBin;
if (is2GHz) {
numPiers = AR9300_NUM_2G_20_TARGET_POWERS;
- pEepromTargetPwr = eep->calTargetPower2G;
- pFreqBin = eep->calTarget_freqbin_2G;
} else {
numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
- pEepromTargetPwr = eep->calTargetPower5G;
- pFreqBin = eep->calTarget_freqbin_5G;
}
/*
@@ -4349,8 +4561,10 @@ static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah,
* targetpower piers stored on eeprom
*/
for (i = 0; i < numPiers; i++) {
- freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz);
- targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ freqArray[i] = ath9k_hw_fbin2freq(
+ ar9003_cal_target_freqbin(ah, i, is2GHz), is2GHz);
+ targetPowerArray[i] =
+ ar9003_cal_target_power(ah, i, rateIndex, is2GHz);
}
/* interpolate to get target power for given frequency */
@@ -4366,18 +4580,11 @@ static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah,
u16 numPiers, i;
s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS];
s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS];
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct cal_tgt_pow_ht *pEepromTargetPwr;
- u8 *pFreqBin;
if (is2GHz) {
numPiers = AR9300_NUM_2G_20_TARGET_POWERS;
- pEepromTargetPwr = eep->calTargetPower2GHT20;
- pFreqBin = eep->calTarget_freqbin_2GHT20;
} else {
numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
- pEepromTargetPwr = eep->calTargetPower5GHT20;
- pFreqBin = eep->calTarget_freqbin_5GHT20;
}
/*
@@ -4385,8 +4592,11 @@ static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah,
* from targetpower piers stored on eeprom
*/
for (i = 0; i < numPiers; i++) {
- freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz);
- targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ freqArray[i] = ath9k_hw_fbin2freq(
+ ar9003_cal_target_freqbin_ht20(ah, i, is2GHz),
+ is2GHz);
+ targetPowerArray[i] = ar9003_cal_target_power_ht20(
+ ah, i, rateIndex, is2GHz);
}
/* interpolate to get target power for given frequency */
@@ -4402,18 +4612,11 @@ static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah,
u16 numPiers, i;
s32 targetPowerArray[AR9300_NUM_5G_40_TARGET_POWERS];
s32 freqArray[AR9300_NUM_5G_40_TARGET_POWERS];
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct cal_tgt_pow_ht *pEepromTargetPwr;
- u8 *pFreqBin;
if (is2GHz) {
numPiers = AR9300_NUM_2G_40_TARGET_POWERS;
- pEepromTargetPwr = eep->calTargetPower2GHT40;
- pFreqBin = eep->calTarget_freqbin_2GHT40;
} else {
numPiers = AR9300_NUM_5G_40_TARGET_POWERS;
- pEepromTargetPwr = eep->calTargetPower5GHT40;
- pFreqBin = eep->calTarget_freqbin_5GHT40;
}
/*
@@ -4421,8 +4624,11 @@ static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah,
* targetpower piers stored on eeprom
*/
for (i = 0; i < numPiers; i++) {
- freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz);
- targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ freqArray[i] = ath9k_hw_fbin2freq(
+ ar9003_cal_target_freqbin_ht40(ah, i, is2GHz),
+ is2GHz);
+ targetPowerArray[i] = ar9003_cal_target_power_ht40(
+ ah, i, rateIndex, is2GHz);
}
/* interpolate to get target power for given frequency */
@@ -4437,17 +4643,16 @@ static u8 ar9003_hw_eeprom_get_cck_tgt_pwr(struct ath_hw *ah,
u16 numPiers = AR9300_NUM_2G_CCK_TARGET_POWERS, i;
s32 targetPowerArray[AR9300_NUM_2G_CCK_TARGET_POWERS];
s32 freqArray[AR9300_NUM_2G_CCK_TARGET_POWERS];
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- struct cal_tgt_pow_legacy *pEepromTargetPwr = eep->calTargetPowerCck;
- u8 *pFreqBin = eep->calTarget_freqbin_Cck;
/*
* create array of channels and targetpower from
* targetpower piers stored on eeprom
*/
for (i = 0; i < numPiers; i++) {
- freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], 1);
- targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ freqArray[i] = ath9k_hw_fbin2freq(
+ ar9003_cal_target_freqbin_cck(ah, i), 1);
+ targetPowerArray[i] =
+ ar9003_cal_target_power_cck(ah, i, rateIndex);
}
/* interpolate to get target power for given frequency */
@@ -4759,9 +4964,8 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
int *ptemperature, int *pvoltage,
int *pnf_cal, int *pnf_power)
{
- u8 *pCalPier;
+ u8 calPier;
struct ar9300_cal_data_per_freq_op_loop *pCalPierStruct;
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
struct ath_common *common = ath9k_hw_common(ah);
if (ichain >= AR9300_MAX_CHAINS) {
@@ -4778,9 +4982,8 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
AR9300_NUM_2G_CAL_PIERS);
return -1;
}
-
- pCalPier = &(eep->calFreqPier2G[ipier]);
- pCalPierStruct = &(eep->calPierData2G[ichain][ipier]);
+ calPier = ar9003_cal_freq_pier(ah, ipier, is2ghz);
+ pCalPierStruct = ar9003_cal_pier_data(ah, ichain, ipier, is2ghz);
} else {
if (ipier >= AR9300_NUM_5G_CAL_PIERS) {
ath_dbg(common, EEPROM,
@@ -4788,11 +4991,11 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
AR9300_NUM_5G_CAL_PIERS);
return -1;
}
- pCalPier = &(eep->calFreqPier5G[ipier]);
- pCalPierStruct = &(eep->calPierData5G[ichain][ipier]);
+ calPier = ar9003_cal_freq_pier(ah, ipier, is2ghz);
+ pCalPierStruct = ar9003_cal_pier_data(ah, ichain, ipier, is2ghz);
}
- *pfrequency = ath9k_hw_fbin2freq(*pCalPier, is2ghz);
+ *pfrequency = ath9k_hw_fbin2freq(calPier, is2ghz);
*pcorrection = pCalPierStruct->refPower;
*ptemperature = pCalPierStruct->tempMeas;
*pvoltage = pCalPierStruct->voltMeas;
@@ -4810,7 +5013,12 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
int *voltage, int *temperature)
{
int temp_slope = 0, temp_slope1 = 0, temp_slope2 = 0;
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_base_eep_hdr *pBase = ar9003_base_header(ah);
+ struct ar9300_BaseExtension_1 *base_ext1 = ar9003_base_ext1(ah);
+ bool is2ghz = frequency < 4000;
+ int8_t eep_temp_slope = ar9003_temp_slope(ah, is2ghz);
+ int8_t eep_temp_slope_low = ar9003_temp_slope_low(ah);
+ int8_t eep_temp_slope_high = ar9003_temp_slope_high(ah);
int f[8], t[8], t1[3], t2[3], i;
REG_RMW(ah, AR_PHY_TPC_11_B0,
@@ -4842,23 +5050,23 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
* enable temperature compensation
* Need to use register names
*/
- if (frequency < 4000) {
- temp_slope = eep->modalHeader2G.tempSlope;
+ if (is2ghz) {
+ temp_slope = eep_temp_slope;
} else {
if (AR_SREV_9550(ah)) {
- t[0] = eep->base_ext1.tempslopextension[2];
- t1[0] = eep->base_ext1.tempslopextension[3];
- t2[0] = eep->base_ext1.tempslopextension[4];
+ t[0] = base_ext1->tempslopextension[2];
+ t1[0] = base_ext1->tempslopextension[3];
+ t2[0] = base_ext1->tempslopextension[4];
f[0] = 5180;
- t[1] = eep->modalHeader5G.tempSlope;
- t1[1] = eep->base_ext1.tempslopextension[0];
- t2[1] = eep->base_ext1.tempslopextension[1];
+ t[1] = eep_temp_slope;
+ t1[1] = base_ext1->tempslopextension[0];
+ t2[1] = base_ext1->tempslopextension[1];
f[1] = 5500;
- t[2] = eep->base_ext1.tempslopextension[5];
- t1[2] = eep->base_ext1.tempslopextension[6];
- t2[2] = eep->base_ext1.tempslopextension[7];
+ t[2] = base_ext1->tempslopextension[5];
+ t1[2] = base_ext1->tempslopextension[6];
+ t2[2] = base_ext1->tempslopextension[7];
f[2] = 5785;
temp_slope = ar9003_hw_power_interpolate(frequency,
@@ -4871,42 +5079,44 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
goto tempslope;
}
- if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) {
+ if ((pBase->miscConfiguration & 0x20) != 0) {
for (i = 0; i < 8; i++) {
- t[i] = eep->base_ext1.tempslopextension[i];
- f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0);
+ t[i] = base_ext1->tempslopextension[i];
+ f[i] = FBIN2FREQ(
+ ar9003_cal_freq_pier(ah, i, is2ghz),
+ 0);
}
temp_slope = ar9003_hw_power_interpolate((s32) frequency,
f, t, 8);
- } else if (eep->base_ext2.tempSlopeLow != 0) {
- t[0] = eep->base_ext2.tempSlopeLow;
+ } else if (eep_temp_slope_low != 0) {
+ t[0] = eep_temp_slope_low;
f[0] = 5180;
- t[1] = eep->modalHeader5G.tempSlope;
+ t[1] = eep_temp_slope;
f[1] = 5500;
- t[2] = eep->base_ext2.tempSlopeHigh;
+ t[2] = eep_temp_slope_high;
f[2] = 5785;
temp_slope = ar9003_hw_power_interpolate((s32) frequency,
f, t, 3);
} else {
- temp_slope = eep->modalHeader5G.tempSlope;
+ temp_slope = eep_temp_slope;
}
}
tempslope:
if (AR_SREV_9550(ah) || AR_SREV_9531(ah) || AR_SREV_9561(ah) ||
AR_SREV_5502(ah)) {
- u8 txmask = (eep->baseEepHeader.txrxMask & 0xf0) >> 4;
+ u8 txmask = (pBase->txrxMask & 0xf0) >> 4;
/*
* AR955x has tempSlope register for each chain.
* Check whether temp_compensation feature is enabled or not.
*/
- if (eep->baseEepHeader.featureEnable & 0x1) {
- if (frequency < 4000) {
+ if (pBase->featureEnable & 0x1) {
+ if (is2ghz) {
if (txmask & BIT(0))
REG_RMW_FIELD(ah, AR_PHY_TPC_19,
AR_PHY_TPC_19_ALPHA_THERM,
- eep->base_ext2.tempSlopeLow);
+ eep_temp_slope_low);
if (txmask & BIT(1))
REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
AR_PHY_TPC_19_ALPHA_THERM,
@@ -4914,7 +5124,7 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
if (txmask & BIT(2))
REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
AR_PHY_TPC_19_ALPHA_THERM,
- eep->base_ext2.tempSlopeHigh);
+ eep_temp_slope_high);
} else {
if (txmask & BIT(0))
REG_RMW_FIELD(ah, AR_PHY_TPC_19,
@@ -5139,42 +5349,25 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
return 0;
}
-static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep,
+static u16 ar9003_hw_get_direct_edge_power(struct ath_hw *ah,
int idx,
int edge,
bool is2GHz)
{
- struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
- struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
-
- if (is2GHz)
- return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
- else
- return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
+ return CTL_EDGE_TPOWER(ar9003_ctl_power_data(ah, idx, edge, is2GHz));
}
-static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
+static u16 ar9003_hw_get_indirect_edge_power(struct ath_hw *ah,
int idx,
unsigned int edge,
u16 freq,
bool is2GHz)
{
- struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
- struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
-
- u8 *ctl_freqbin = is2GHz ?
- &eep->ctl_freqbin_2G[idx][0] :
- &eep->ctl_freqbin_5G[idx][0];
-
- if (is2GHz) {
- if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
- CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
- return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
- } else {
- if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
- CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
- return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
- }
+ if (ath9k_hw_fbin2freq(ar9003_ctl_freqbin(ah, idx, edge - 1, is2GHz),
+ is2GHz) < freq &&
+ CTL_EDGE_FLAGS(ar9003_ctl_power_data(ah, idx, edge - 1, is2GHz)))
+ return CTL_EDGE_TPOWER(
+ ar9003_ctl_power_data(ah, idx, edge - 1, is2GHz));
return MAX_RATE_POWER;
}
@@ -5182,37 +5375,36 @@ static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
/*
* Find the maximum conformance test limit for the given channel and CTL info
*/
-static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep,
+static u16 ar9003_hw_get_max_edge_power(struct ath_hw *ah,
u16 freq, int idx, bool is2GHz)
{
u16 twiceMaxEdgePower = MAX_RATE_POWER;
- u8 *ctl_freqbin = is2GHz ?
- &eep->ctl_freqbin_2G[idx][0] :
- &eep->ctl_freqbin_5G[idx][0];
u16 num_edges = is2GHz ?
AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G;
unsigned int edge;
/* Get the edge power */
for (edge = 0;
- (edge < num_edges) && (ctl_freqbin[edge] != AR5416_BCHAN_UNUSED);
+ (edge < num_edges) &&
+ (ar9003_ctl_freqbin(ah, idx, edge, is2GHz) != AR5416_BCHAN_UNUSED);
edge++) {
/*
* If there's an exact channel match or an inband flag set
* on the lower channel use the given rdEdgePower
*/
- if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) {
- twiceMaxEdgePower =
- ar9003_hw_get_direct_edge_power(eep, idx,
- edge, is2GHz);
+ if (freq == ath9k_hw_fbin2freq(ar9003_ctl_freqbin(ah, idx, edge,
+ is2GHz),
+ is2GHz)) {
+ twiceMaxEdgePower = ar9003_hw_get_direct_edge_power(
+ ah, idx, edge, is2GHz);
break;
} else if ((edge > 0) &&
- (freq < ath9k_hw_fbin2freq(ctl_freqbin[edge],
- is2GHz))) {
- twiceMaxEdgePower =
- ar9003_hw_get_indirect_edge_power(eep, idx,
- edge, freq,
- is2GHz);
+ (freq <
+ ath9k_hw_fbin2freq(ar9003_ctl_freqbin(ah, idx, edge,
+ is2GHz),
+ is2GHz))) {
+ twiceMaxEdgePower = ar9003_hw_get_indirect_edge_power(
+ ah, idx, edge, freq, is2GHz);
/*
* Leave loop - no more affecting edges possible in
* this monotonic increasing list
@@ -5234,7 +5426,6 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
u16 powerLimit)
{
struct ath_common *common = ath9k_hw_common(ah);
- struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep;
u16 twiceMaxEdgePower;
int i;
u16 scaledPower = 0, minCtlPower;
@@ -5249,7 +5440,6 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
const u16 *pCtlMode;
u16 ctlMode, freq;
struct chan_centers centers;
- u8 *ctlIndex;
u8 ctlNum;
u16 twiceMinEdgePower;
bool is2ghz = IS_CHAN_2GHZ(chan);
@@ -5304,18 +5494,17 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
/* walk through each CTL index stored in EEPROM */
if (is2ghz) {
- ctlIndex = pEepData->ctlIndex_2G;
ctlNum = AR9300_NUM_CTLS_2G;
} else {
- ctlIndex = pEepData->ctlIndex_5G;
ctlNum = AR9300_NUM_CTLS_5G;
}
twiceMaxEdgePower = MAX_RATE_POWER;
- for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) {
+ for (i = 0; (i < ctlNum) && ar9003_ctl_index(ah, i, is2ghz);
+ i++) {
ath_dbg(common, REGULATORY,
"LOOP-Ctlidx %d: cfgCtl 0x%2.2x pCtlMode 0x%2.2x ctlIndex 0x%2.2x chan %d\n",
- i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
+ i, cfgCtl, pCtlMode[ctlMode], ar9003_ctl_index(ah, i, is2ghz),
chan->channel);
/*
@@ -5325,13 +5514,13 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
*/
if ((((cfgCtl & ~CTL_MODE_M) |
(pCtlMode[ctlMode] & CTL_MODE_M)) ==
- ctlIndex[i]) ||
+ ar9003_ctl_index(ah, i, is2ghz)) ||
(((cfgCtl & ~CTL_MODE_M) |
(pCtlMode[ctlMode] & CTL_MODE_M)) ==
- ((ctlIndex[i] & CTL_MODE_M) |
+ ((ar9003_ctl_index(ah, i, is2ghz) & CTL_MODE_M) |
SD_NO_CTL))) {
twiceMinEdgePower =
- ar9003_hw_get_max_edge_power(pEepData,
+ ar9003_hw_get_max_edge_power(ah,
freq, i,
is2ghz);
@@ -5569,16 +5758,12 @@ static u16 ath9k_hw_ar9300_get_spur_channel(struct ath_hw *ah,
s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
-
- return (eep->baseEepHeader.txrxgain >> 4) & 0xf; /* bits 7:4 */
+ return (ar9003_base_header(ah)->txrxgain >> 4) & 0xf; /* bits 7:4 */
}
s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah)
{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
-
- return (eep->baseEepHeader.txrxgain) & 0xf; /* bits 3:0 */
+ return (ar9003_base_header(ah)->txrxgain) & 0xf; /* bits 3:0 */
}
u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is2ghz)
@@ -5619,7 +5804,7 @@ unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
static u8 ar9003_get_eepmisc(struct ath_hw *ah)
{
- return ah->eeprom.ar9300_eep.baseEepHeader.opCapFlags.eepMisc;
+ return ar9003_base_header(ah)->opCapFlags.eepMisc;
}
const struct eeprom_ops eep_ar9300_ops = {
This will allow the code to handle both old and new AR9300 eeprom formats. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> --- .../net/wireless/ath/ath9k/ar9003_eeprom.c | 633 +++++++++++------- 1 file changed, 409 insertions(+), 224 deletions(-)