@@ -417,30 +417,66 @@ struct gpio_irq_chip inside struct gpio_chip before adding the gpio_chip.
If you do this, the additional irq_chip will be set up by gpiolib at the
same time as setting up the rest of the GPIO functionality. The following
is a typical example of a chained cascaded interrupt handler using
-the gpio_irq_chip:
+the gpio_irq_chip. Note how the mask/unmask (or disable/enable) functions
+call into the core gpiolib code:
.. code-block:: c
- /* Typical state container with dynamic irqchip */
+ /* Typical state container */
struct my_gpio {
struct gpio_chip gc;
- struct irq_chip irq;
+ };
+
+ static void my_gpio_mask_irq(struct irq_data *d)
+ {
+ struct gpio_chip *gc = irq_desc_get_handler_data(d);
+
+ /*
+ * Perform any necessary action to mask the interrupt,
+ * and then call into the core code to synchronise the
+ * state.
+ */
+
+ gpiochip_disable_irq(gc, d->hwirq);
+ }
+
+ static void my_gpio_unmask_irq(struct irq_data *d)
+ {
+ struct gpio_chip *gc = irq_desc_get_handler_data(d);
+
+ gpiochip_enable_irq(gc, d->hwirq);
+
+ /*
+ * Perform any necessary action to unmask the interrupt,
+ * after having called into the core code to synchronise
+ * the state.
+ */
+ }
+
+ /*
+ * Statically populate the irqchip. Note that it is made const
+ * (further indicated by the IRQCHIP_IMMUTABLE flag), and that
+ * the GPIOCHIP_IRQ_RESOURCE_HELPER macro adds some extra
+ * callbacks to the structure.
+ */
+ static const struct irq_chip my_gpio_irq_chip = {
+ .name = "my_gpio_irq",
+ .irq_ack = my_gpio_ack_irq,
+ .irq_mask = my_gpio_mask_irq,
+ .irq_unmask = my_gpio_unmask_irq,
+ .irq_set_type = my_gpio_set_irq_type,
+ .flags = IRQCHIP_IMMUTABLE,
+ /* Provide the gpio resource callbacks */
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
int irq; /* from platform etc */
struct my_gpio *g;
struct gpio_irq_chip *girq;
- /* Set up the irqchip dynamically */
- g->irq.name = "my_gpio_irq";
- g->irq.irq_ack = my_gpio_ack_irq;
- g->irq.irq_mask = my_gpio_mask_irq;
- g->irq.irq_unmask = my_gpio_unmask_irq;
- g->irq.irq_set_type = my_gpio_set_irq_type;
-
/* Get a pointer to the gpio_irq_chip */
girq = &g->gc.irq;
- girq->chip = &g->irq;
+ gpio_irq_chip_set_chip(girq, &my_gpio_irq_chip);
girq->parent_handler = ftgpio_gpio_irq_handler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
@@ -458,23 +494,58 @@ the interrupt separately and go with it:
.. code-block:: c
- /* Typical state container with dynamic irqchip */
+ /* Typical state container */
struct my_gpio {
struct gpio_chip gc;
- struct irq_chip irq;
+ };
+
+ static void my_gpio_mask_irq(struct irq_data *d)
+ {
+ struct gpio_chip *gc = irq_desc_get_handler_data(d);
+
+ /*
+ * Perform any necessary action to mask the interrupt,
+ * and then call into the core code to synchronise the
+ * state.
+ */
+
+ gpiochip_disable_irq(gc, d->hwirq);
+ }
+
+ static void my_gpio_unmask_irq(struct irq_data *d)
+ {
+ struct gpio_chip *gc = irq_desc_get_handler_data(d);
+
+ gpiochip_enable_irq(gc, d->hwirq);
+
+ /*
+ * Perform any necessary action to unmask the interrupt,
+ * after having called into the core code to synchronise
+ * the state.
+ */
+ }
+
+ /*
+ * Statically populate the irqchip. Note that it is made const
+ * (further indicated by the IRQCHIP_IMMUTABLE flag), and that
+ * the GPIOCHIP_IRQ_RESOURCE_HELPER macro adds some extra
+ * callbacks to the structure.
+ */
+ static const struct irq_chip my_gpio_irq_chip = {
+ .name = "my_gpio_irq",
+ .irq_ack = my_gpio_ack_irq,
+ .irq_mask = my_gpio_mask_irq,
+ .irq_unmask = my_gpio_unmask_irq,
+ .irq_set_type = my_gpio_set_irq_type,
+ .flags = IRQCHIP_IMMUTABLE,
+ /* Provide the gpio resource callbacks */
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
int irq; /* from platform etc */
struct my_gpio *g;
struct gpio_irq_chip *girq;
- /* Set up the irqchip dynamically */
- g->irq.name = "my_gpio_irq";
- g->irq.irq_ack = my_gpio_ack_irq;
- g->irq.irq_mask = my_gpio_mask_irq;
- g->irq.irq_unmask = my_gpio_unmask_irq;
- g->irq.irq_set_type = my_gpio_set_irq_type;
-
ret = devm_request_threaded_irq(dev, irq, NULL,
irq_thread_fn, IRQF_ONESHOT, "my-chip", g);
if (ret < 0)
@@ -482,7 +553,7 @@ the interrupt separately and go with it:
/* Get a pointer to the gpio_irq_chip */
girq = &g->gc.irq;
- girq->chip = &g->irq;
+ gpio_irq_chip_set_chip(girq, &my_gpio_irq_chip);
/* This will let us handle the parent IRQ in the driver */
girq->parent_handler = NULL;
girq->num_parents = 0;
@@ -500,24 +571,61 @@ In this case the typical set-up will look like this:
/* Typical state container with dynamic irqchip */
struct my_gpio {
struct gpio_chip gc;
- struct irq_chip irq;
struct fwnode_handle *fwnode;
};
- int irq; /* from platform etc */
+ static void my_gpio_mask_irq(struct irq_data *d)
+ {
+ struct gpio_chip *gc = irq_desc_get_handler_data(d);
+
+ /*
+ * Perform any necessary action to mask the interrupt,
+ * and then call into the core code to synchronise the
+ * state.
+ */
+
+ gpiochip_disable_irq(gc, d->hwirq);
+ irq_mask_mask_parent(d);
+ }
+
+ static void my_gpio_unmask_irq(struct irq_data *d)
+ {
+ struct gpio_chip *gc = irq_desc_get_handler_data(d);
+
+ gpiochip_enable_irq(gc, d->hwirq);
+
+ /*
+ * Perform any necessary action to unmask the interrupt,
+ * after having called into the core code to synchronise
+ * the state.
+ */
+
+ irq_mask_unmask_parent(d);
+ }
+
+ /*
+ * Statically populate the irqchip. Note that it is made const
+ * (further indicated by the IRQCHIP_IMMUTABLE flag), and that
+ * the GPIOCHIP_IRQ_RESOURCE_HELPER macro adds some extra
+ * callbacks to the structure.
+ */
+ static const struct irq_chip my_gpio_irq_chip = {
+ .name = "my_gpio_irq",
+ .irq_ack = my_gpio_ack_irq,
+ .irq_mask = my_gpio_mask_irq,
+ .irq_unmask = my_gpio_unmask_irq,
+ .irq_set_type = my_gpio_set_irq_type,
+ .flags = IRQCHIP_IMMUTABLE,
+ /* Provide the gpio resource callbacks */
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+ };
+
struct my_gpio *g;
struct gpio_irq_chip *girq;
- /* Set up the irqchip dynamically */
- g->irq.name = "my_gpio_irq";
- g->irq.irq_ack = my_gpio_ack_irq;
- g->irq.irq_mask = my_gpio_mask_irq;
- g->irq.irq_unmask = my_gpio_unmask_irq;
- g->irq.irq_set_type = my_gpio_set_irq_type;
-
/* Get a pointer to the gpio_irq_chip */
girq = &g->gc.irq;
- girq->chip = &g->irq;
+ gpio_irq_chip_set_chip(girq, &my_gpio_irq_chip);
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
girq->fwnode = g->fwnode;
@@ -605,8 +713,9 @@ When implementing an irqchip inside a GPIO driver, these two functions should
typically be called in the .irq_disable() and .irq_enable() callbacks from the
irqchip.
-When using the gpiolib irqchip helpers, these callbacks are automatically
-assigned.
+When IRQCHIP_IMMUTABLE is not advertised by the irqchip, these callbacks
+are automatically assigned. This behaviour is deprecated and on its way
+to be removed from the kernel.
Real-Time compliance for GPIO IRQ chips