[v2,1/5] dt-bindings: media: platform: visconti: Add Toshiba Visconti Video Input Interface bindings

Adds the Device Tree binding documentation that allows to describe
the Video Input Interface found in Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 .../bindings/media/toshiba,visconti-viif.yaml | 103 ++++++++++++++++++
 1 file changed, 103 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml

On 14/04/2022 07:35, Yuji Ishikawa wrote:
> Adds the Device Tree binding documentation that allows to describe
> the Video Input Interface found in Toshiba Visconti SoCs.
> 
> Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
>  .../bindings/media/toshiba,visconti-viif.yaml | 103 ++++++++++++++++++
>  1 file changed, 103 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml b/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> new file mode 100644

You need to CC this series to devicetree@vger.kernel.org so that the device tree reviewers
can take a look at this.

Regards,

	Hans

> index 000000000..848ea5019
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/toshiba,visconti-viif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba Visconti5 SoC Video Input Interface Device Tree Bindings
> +
> +maintainers:
> +  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> +
> +description: |
> +  Toshiba Visconti5 SoC Video Input Interface (VIIF) receives MIPI CSI2 video stream,
> +  processes the stream with embedded image signal processor (L1ISP, L2ISP), then stores pictures to main memory.
> +
> +properties:
> +  compatible:
> +    const: toshiba,visconti-viif
> +
> +  reg:
> +    items:
> +      - description: registers for capture control
> +      - description: registers for CSI2 receiver control
> +
> +  interrupts:
> +    items:
> +      - description: Sync Interrupt
> +      - description: Status (Error) Interrupt
> +      - description: CSI2 Receiver Interrupt
> +      - description: L1ISP Interrupt
> +
> +  index:
> +    enum: [0, 1]
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    unevaluatedProperties: false
> +    description: Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +    properties:
> +      endpoint:
> +        $ref: video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            description: VIIF supports 2 or 4 data lines
> +            items:
> +              minItems: 1
> +              maxItems: 4
> +              items:
> +                - const: 1
> +                - const: 2
> +                - const: 3
> +                - const: 4
> +          clock-lanes:
> +            description: VIIF supports 1 clock line
> +            const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        viif0: viif@1c000000 {
> +            compatible = "toshiba,visconti-viif";
> +            reg = <0 0x1c000000 0 0x6000>,
> +                  <0 0x1c008000 0 0x400>;
> +            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +            index = <0>;
> +            status = "disabled";
> +
> +            port {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                csi_in0: endpoint {
> +                    remote-endpoint = <&imx219_out0>;
> +                    bus-type = <4>;
> +                    data-lanes = <1 2>;
> +                    clock-lanes = <0>;
> +                    clock-noncontinuous;
> +                    link-frequencies = /bits/ 64 <456000000>;
> +                };
> +            };
> +        };
> +    };
> +

Hi, Hans

Thank you for your comments.
I'll add the specified address for further posts.

Regards,
	Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Wednesday, April 20, 2022 4:56 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; Mauro Carvalho Chehab
> <mchehab@kernel.org>; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> <nobuhiro1.iwamatsu@toshiba.co.jp>
> Cc: linux-media@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v2 1/5] dt-bindings: media: platform: visconti: Add
> Toshiba Visconti Video Input Interface bindings
> 
> On 14/04/2022 07:35, Yuji Ishikawa wrote:
> > Adds the Device Tree binding documentation that allows to describe the
> > Video Input Interface found in Toshiba Visconti SoCs.
> >
> > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> > Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> > ---
> >  .../bindings/media/toshiba,visconti-viif.yaml | 103
> > ++++++++++++++++++
> >  1 file changed, 103 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> > b/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> > new file mode 100644
> 
> You need to CC this series to devicetree@vger.kernel.org so that the device tree
> reviewers can take a look at this.
> 
> Regards,
> 
> 	Hans
> 
> > index 000000000..848ea5019
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/toshiba,visconti-viif.ya
> > +++ ml
> > @@ -0,0 +1,103 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/toshiba,visconti-viif.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Toshiba Visconti5 SoC Video Input Interface Device Tree
> > +Bindings
> > +
> > +maintainers:
> > +  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> > +
> > +description: |
> > +  Toshiba Visconti5 SoC Video Input Interface (VIIF) receives MIPI
> > +CSI2 video stream,
> > +  processes the stream with embedded image signal processor (L1ISP,
> L2ISP), then stores pictures to main memory.
> > +
> > +properties:
> > +  compatible:
> > +    const: toshiba,visconti-viif
> > +
> > +  reg:
> > +    items:
> > +      - description: registers for capture control
> > +      - description: registers for CSI2 receiver control
> > +
> > +  interrupts:
> > +    items:
> > +      - description: Sync Interrupt
> > +      - description: Status (Error) Interrupt
> > +      - description: CSI2 Receiver Interrupt
> > +      - description: L1ISP Interrupt
> > +
> > +  index:
> > +    enum: [0, 1]
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/$defs/port-base
> > +    unevaluatedProperties: false
> > +    description: Input port node, single endpoint describing the CSI-2
> transmitter.
> > +
> > +    properties:
> > +      endpoint:
> > +        $ref: video-interfaces.yaml#
> > +        unevaluatedProperties: false
> > +
> > +        properties:
> > +          data-lanes:
> > +            description: VIIF supports 2 or 4 data lines
> > +            items:
> > +              minItems: 1
> > +              maxItems: 4
> > +              items:
> > +                - const: 1
> > +                - const: 2
> > +                - const: 3
> > +                - const: 4
> > +          clock-lanes:
> > +            description: VIIF supports 1 clock line
> > +            const: 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        viif0: viif@1c000000 {
> > +            compatible = "toshiba,visconti-viif";
> > +            reg = <0 0x1c000000 0 0x6000>,
> > +                  <0 0x1c008000 0 0x400>;
> > +            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> > +            index = <0>;
> > +            status = "disabled";
> > +
> > +            port {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                csi_in0: endpoint {
> > +                    remote-endpoint = <&imx219_out0>;
> > +                    bus-type = <4>;
> > +                    data-lanes = <1 2>;
> > +                    clock-lanes = <0>;
> > +                    clock-noncontinuous;
> > +                    link-frequencies = /bits/ 64 <456000000>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +