diff mbox series

[V4,2/3] arm64: dts: imx8mn: Enable HS400-ES

Message ID 20220410193544.1745684-2-aford173@gmail.com
State Accepted
Commit 472f20b4f2534236fb90cdf93b42a071eb77bc5e
Headers show
Series None | expand

Commit Message

Adam Ford April 10, 2022, 7:35 p.m. UTC 
The SDHC controller in the imx8mn has the same controller
as the imx8mm which supports HS400-ES. Change the compatible
fallback to imx8mm to enable it, but keep the imx7d-usdhc
to prevent breaking backwards compatibility.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V4: No Change
V3: No change
V2: Keep fallback to fsl,imx7d-usdhc to prevent breakage

Comments

Shawn Guo April 18, 2022, 8:08 a.m. UTC | #1 
On Sun, Apr 10, 2022 at 02:35:42PM -0500, Adam Ford wrote:
> The SDHC controller in the imx8mn has the same controller
> as the imx8mm which supports HS400-ES. Change the compatible
> fallback to imx8mm to enable it, but keep the imx7d-usdhc
> to prevent breaking backwards compatibility.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

Applied #2 and #3, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 99f0f5026674..13c51363cc06 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -933,7 +933,7 @@  mu: mailbox@30aa0000 {
 			};
 
 			usdhc1: mmc@30b40000 {
-				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
@@ -947,7 +947,7 @@  usdhc1: mmc@30b40000 {
 			};
 
 			usdhc2: mmc@30b50000 {
-				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
@@ -961,7 +961,7 @@  usdhc2: mmc@30b50000 {
 			};
 
 			usdhc3: mmc@30b60000 {
-				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,