diff mbox series

[2/2] arm: dts: Enable device-tree overlay support for RPi devices

Message ID 20220410225940.135744-3-aurelien@aurel32.net
State Superseded
Headers show
Series [1/2] arm64: dts: broadcom: Enable device-tree overlay support for RPi devices | expand

Commit Message

Aurelien Jarno April 10, 2022, 10:59 p.m. UTC
Add the '-@' DTC option for the Raspberry Pi devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.

The Rasbperry Pi devices are well known for their GPIO header, that
allow various "HATs" or other modules do be connected and this enables
users to create out-of-tree device-tree overlays for these modules.

Please note that this change does increase the size of the resulting DTB
by ~40%. For example, with v5.17 increase in size is as follows:

  bcm2711-rpi-400.dtb       26481 -> 36830 bytes
  bcm2711-rpi-4-b.dtb       26537 -> 36886 bytes
  bcm2711-rpi-cm4-io.dtb    26426 -> 36945 bytes
  bcm2835-rpi-a.dtb         12641 -> 17852 bytes
  bcm2835-rpi-a-plus.dtb    12765 -> 17976 bytes
  bcm2835-rpi-b.dtb         12763 -> 17998 bytes
  bcm2835-rpi-b-plus.dtb    12979 -> 18263 bytes
  bcm2835-rpi-b-rev2.dtb    12847 -> 18131 bytes
  bcm2835-rpi-cm1-io1.dtb   12839 -> 18113 bytes
  bcm2835-rpi-zero.dtb      12681 -> 17924 bytes
  bcm2835-rpi-zero-w.dtb    13135 -> 18430 bytes
  bcm2836-rpi-2-b.dtb       13687 -> 19255 bytes
  bcm2837-rpi-3-a-plus.dtb  14133 -> 19740 bytes
  bcm2837-rpi-3-b.dtb       14310 -> 20006 bytes
  bcm2837-rpi-3-b-plus.dtb  14670 -> 20474 bytes
  bcm2837-rpi-cm3-io3.dtb   13680 -> 19266 bytes

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 arch/arm/boot/dts/Makefile | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c16f8a2b738..85644149de44 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -81,6 +81,24 @@  dtb-$(CONFIG_SOC_SAMA7G5) += \
 	at91-sama7g5ek.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_bcm2835-rpi-b := -@
+DTC_FLAGS_bcm2835-rpi-a := -@
+DTC_FLAGS_bcm2835-rpi-b-rev2 := -@
+DTC_FLAGS_bcm2835-rpi-b-plus := -@
+DTC_FLAGS_bcm2835-rpi-a-plus := -@
+DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
+DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
+DTC_FLAGS_bcm2837-rpi-3-b := -@
+DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
+DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@
+DTC_FLAGS_bcm2837-rpi-zero-2-w := -@
+DTC_FLAGS_bcm2711-rpi-400 := -@
+DTC_FLAGS_bcm2711-rpi-4-b := -@
+DTC_FLAGS_bcm2711-rpi-cm4-io := -@
+DTC_FLAGS_bcm2835-rpi-zero := -@
+DTC_FLAGS_bcm2835-rpi-zero-w := -@
 dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b.dtb \
 	bcm2835-rpi-a.dtb \