diff mbox series

[v1,7/7] riscv: dts: microchip: reparent mpfs clocks

Message ID 20220408143646.3693104-8-conor.dooley@microchip.com
State Superseded
Headers show
Series Add rtc refclk support for PolarFire SoC | expand

Commit Message

Conor Dooley April 8, 2022, 2:36 p.m. UTC
The 600M clock in the fabric is not the real reference, replace it with
a 125M clock which is the correct value for the icicle kit. Rename the
msspllclk node to mssrefclk since this is now the input to, not the
output of, the msspll clock. Control of the msspll clock has been moved
into the clock configurator, so add the register range for it to the clk
configurator. Finally, add a new output of the clock config block which
will provide the 1M reference clock for the MTIMER and the rtc.

Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../boot/dts/microchip/microchip-mpfs-icicle-kit.dts      | 2 +-
 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi         | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
index cd2fe80fa81a..3392153dd0f1 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
@@ -45,7 +45,7 @@  ddrc_cache_hi: memory@1000000000 {
 };
 
 &refclk {
-	clock-frequency = <600000000>;
+	clock-frequency = <125000000>;
 };
 
 &mmuart1 {
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 3b48b7f35410..746c4d4e7686 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -141,7 +141,7 @@  cpu4_intc: interrupt-controller {
 		};
 	};
 
-	refclk: msspllclk {
+	refclk: mssrefclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 	};
@@ -190,7 +190,7 @@  plic: interrupt-controller@c000000 {
 
 		clkcfg: clkcfg@20002000 {
 			compatible = "microchip,mpfs-clkcfg";
-			reg = <0x0 0x20002000 0x0 0x1000>;
+			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
 			clocks = <&refclk>;
 			#clock-cells = <1>;
 		};
@@ -393,8 +393,8 @@  rtc: rtc@20124000 {
 			reg = <0x0 0x20124000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
 			interrupts = <80>, <81>;
-			clocks = <&clkcfg CLK_RTC>;
-			clock-names = "rtc";
+			clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+			clock-names = "rtc", "rtcref";
 			status = "disabled";
 		};