new file mode 100644
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,miim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi MII Management Controller (MIIM)
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+ - $ref: "mdio.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - mscc,ocelot-miim
+ - microchip,lan966x-miim
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ items:
+ - description: base address
+ - description: associated reset register for internal PHYs
+ minItems: 1
+
+ interrupts: true
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio@107009c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-miim";
+ reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+ interrupts = <14>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
deleted file mode 100644
@@ -1,26 +0,0 @@
-Microsemi MII Management Controller (MIIM) / MDIO
-=================================================
-
-Properties:
-- compatible: must be "mscc,ocelot-miim" or "microchip,lan966x-miim"
-- reg: The base address of the MDIO bus controller register bank. Optionally, a
- second register bank can be defined if there is an associated reset register
- for internal PHYs
-- #address-cells: Must be <1>.
-- #size-cells: Must be <0>. MDIO addresses have no size component.
-- interrupts: interrupt specifier (refer to the interrupt binding)
-
-Typically an MDIO bus might have several children.
-
-Example:
- mdio@107009c {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mscc,ocelot-miim";
- reg = <0x107009c 0x36>, <0x10700f0 0x8>;
- interrupts = <14>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
Convert the mscc-miim device tree binding to the new YAML format. The original binding don't mention if the interrupt property is optional or not. But on the SparX-5 SoC, for example, the interrupt property isn't used, thus in the new binding that property is optional. FWIW the driver doesn't use interrupts at all. Signed-off-by: Michael Walle <michael@walle.cc> --- .../devicetree/bindings/net/mscc,miim.yaml | 55 +++++++++++++++++++ .../devicetree/bindings/net/mscc-miim.txt | 26 --------- 2 files changed, 55 insertions(+), 26 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/mscc,miim.yaml delete mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt