diff mbox series

[RFC] mwifiex: Select firmware based on strapping

Message ID 20220321161003.39214-1-francesco.dolcini@toradex.com
State New
Headers show
Series [RFC] mwifiex: Select firmware based on strapping | expand

Commit Message

Francesco Dolcini March 21, 2022, 4:10 p.m. UTC 
From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>

Some WiFi/Bluetooth modules might have different host connection
options, allowing to either use SDIO for both WiFi and Bluetooth,
or SDIO for WiFi and UART for Bluetooth. It is possible to detect
whether a module has SDIO-SDIO or SDIO-UART connection by reading
its host strap register.

This change introduces a way to automatically select appropriate
firmware depending of the connection method, and removes a need
of symlinking or overwriting the original firmware file with a
required one.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
Hi all,

Current mwifiex_sdio implementation does not have strapping detection, which
means there's no way system will automatically detect which firmware needs to
be picked depending of the strapping. SD8997, in particular, can be strapped
for sdiosdio (Wi-Fi over SDIO, Bluetooth over SDIO) or sdiouart (Wi-Fi over
SDIO, Bluetooth over UART). What we do now - simply replace the
original sdiosdio firmware file with the one supplied by NXP [1] for sdiouart.

Of course, this is not clean, and by submitting this patch I would like to
receive your comments regarding how it would be better to implement the
strapping detection.

[1] https://github.com/NXP/imx-firmware/blob/lf-5.10.52_2.1.0/nxp/FwImage_8997_SD/sdiouart8997_combo_v4.bin

Francesco & Andrejs

---
 drivers/net/wireless/marvell/mwifiex/sdio.c | 17 ++++++++++++++++-
 drivers/net/wireless/marvell/mwifiex/sdio.h |  6 ++++++
 2 files changed, 22 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index bde9e4bbfffe..8670ded74c27 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -182,6 +182,9 @@  static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
 	.host_int_rsr_reg = 0x4,
 	.host_int_status_reg = 0x0C,
 	.host_int_mask_reg = 0x08,
+	.host_strap_reg = 0xF4,
+	.host_strap_mask = 0x01,
+	.host_strap_value = 0x00,
 	.status_reg_0 = 0xE8,
 	.status_reg_1 = 0xE9,
 	.sdio_int_mask = 0xff,
@@ -402,6 +405,7 @@  static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = {
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
 	.firmware = SD8997_DEFAULT_FW_NAME,
+	.firmware_alt_strap = SD8997_SDIOUART_FW_NAME,
 	.reg = &mwifiex_reg_sd8997,
 	.max_ports = 32,
 	.mp_agg_pkt_limit = 16,
@@ -536,6 +540,7 @@  mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		struct mwifiex_sdio_device *data = (void *)id->driver_data;
 
 		card->firmware = data->firmware;
+		card->firmware_alt_strap = data->firmware_alt_strap;
 		card->reg = data->reg;
 		card->max_ports = data->max_ports;
 		card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
@@ -2439,6 +2444,7 @@  static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	int ret;
 	struct sdio_mmc_card *card = adapter->card;
 	struct sdio_func *func = card->func;
+	const char *firmware = card->firmware;
 
 	/* save adapter pointer in card */
 	card->adapter = adapter;
@@ -2455,7 +2461,15 @@  static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 		return ret;
 	}
 
-	strcpy(adapter->fw_name, card->firmware);
+	/* Select alternative firmware based on the strapping options */
+	if (card->firmware_alt_strap) {
+		u8 val;
+		mwifiex_read_reg(adapter, card->reg->host_strap_reg, &val);
+		if ((val & card->reg->host_strap_mask) == card->reg->host_strap_value)
+			firmware = card->firmware_alt_strap;
+	}
+	strcpy(adapter->fw_name, firmware);
+
 	if (card->fw_dump_enh) {
 		adapter->mem_type_mapping_tbl = generic_mem_type_map;
 		adapter->num_mem_types = 1;
@@ -3157,3 +3171,4 @@  MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8997_SDIOUART_FW_NAME);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index 5648512c9300..bfea4d5998b7 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -39,6 +39,7 @@ 
 #define SD8977_DEFAULT_FW_NAME "mrvl/sdsd8977_combo_v2.bin"
 #define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin"
 #define SD8997_DEFAULT_FW_NAME "mrvl/sdsd8997_combo_v4.bin"
+#define SD8997_SDIOUART_FW_NAME "nxp/sdiouart8997_combo_v4.bin"
 
 #define BLOCK_MODE	1
 #define BYTE_MODE	0
@@ -196,6 +197,9 @@  struct mwifiex_sdio_card_reg {
 	u8 host_int_rsr_reg;
 	u8 host_int_status_reg;
 	u8 host_int_mask_reg;
+	u8 host_strap_reg;
+	u8 host_strap_mask;
+	u8 host_strap_value;
 	u8 status_reg_0;
 	u8 status_reg_1;
 	u8 sdio_int_mask;
@@ -241,6 +245,7 @@  struct sdio_mmc_card {
 
 	struct completion fw_done;
 	const char *firmware;
+	const char *firmware_alt_strap;
 	const struct mwifiex_sdio_card_reg *reg;
 	u8 max_ports;
 	u8 mp_agg_pkt_limit;
@@ -274,6 +279,7 @@  struct sdio_mmc_card {
 
 struct mwifiex_sdio_device {
 	const char *firmware;
+	const char *firmware_alt_strap;
 	const struct mwifiex_sdio_card_reg *reg;
 	u8 max_ports;
 	u8 mp_agg_pkt_limit;