@@ -523,21 +523,10 @@ static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
int synth_freq;
int range = 10;
int freq_offset = 0;
- int mode;
- u8* spurChansPtr;
+ u8 *spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah, IS_CHAN_2GHZ(chan));
unsigned int i;
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
-
- if (IS_CHAN_5GHZ(chan)) {
- spurChansPtr = &(eep->modalHeader5G.spurChans[0]);
- mode = 0;
- }
- else {
- spurChansPtr = &(eep->modalHeader2G.spurChans[0]);
- mode = 1;
- }
- if (spurChansPtr[0] == 0)
+ if (spur_fbin_ptr[0] == 0)
return; /* No spur in the mode */
if (IS_CHAN_HT40(chan)) {
@@ -554,16 +543,18 @@ static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
ar9003_hw_spur_ofdm_clear(ah);
- for (i = 0; i < AR_EEPROM_MODAL_SPURS && spurChansPtr[i]; i++) {
- freq_offset = ath9k_hw_fbin2freq(spurChansPtr[i], mode);
+ for (i = 0; i < AR_EEPROM_MODAL_SPURS && spur_fbin_ptr[i]; i++) {
+ freq_offset = ath9k_hw_fbin2freq(spur_fbin_ptr[i],
+ IS_CHAN_2GHZ(chan));
freq_offset -= synth_freq;
if (abs(freq_offset) < range) {
ar9003_hw_spur_ofdm_work(ah, chan, freq_offset,
range, synth_freq);
if (AR_SREV_9565(ah) && (i < 4)) {
- freq_offset = ath9k_hw_fbin2freq(spurChansPtr[i + 1],
- mode);
+ freq_offset =
+ ath9k_hw_fbin2freq(spur_fbin_ptr[i + 1],
+ IS_CHAN_2GHZ(chan));
freq_offset -= synth_freq;
if (abs(freq_offset) < range)
ar9003_hw_spur_ofdm_9565(ah, freq_offset);
Similar to ar9003_hw_spur_mitigate_mrc_cck, simplify the code by using ar9003_get_spur_chan_ptr. This may also be required for QCN550x support, to provide an abstraction over the underlying EEPROM format. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 25 +++++++-------------- 1 file changed, 8 insertions(+), 17 deletions(-)