diff mbox series

[v2,12/12] ARM: dts: suniv: licheepi-nano: add SPI flash

Message ID 20220317162349.739636-13-andre.przywara@arm.com
State Accepted
Commit 37384b81bc255bca3412536c50598fa50d05c751
Headers show
Series None | expand

Commit Message

Andre Przywara March 17, 2022, 4:23 p.m. UTC 
Most LicheePi Nano boards come with soldered SPI flash, so enable SPI0
in the .dts and describe the flash chip. There is evidence of different
flash chips used, also of boards with no flash chip soldered, but the
Winbond 16MiB model is the most common, so use that for the compatible
string.  The actual flash chip model will be auto-detected at runtime
anyway.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
---
 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index 8fa79a1d1d2d..04e59b8381cb 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -13,6 +13,7 @@  / {
 	aliases {
 		mmc0 = &mmc0;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
@@ -35,6 +36,20 @@  &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 };
 
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pe_pins>;