@@ -937,7 +937,9 @@ max17042_get_of_pdata(struct max17042_chip *chip)
struct device *dev = &chip->client->dev;
struct device_node *np = dev->of_node;
u32 prop;
+ u64 data64;
struct max17042_platform_data *pdata;
+ struct power_supply_battery_info *info;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -961,6 +963,32 @@ max17042_get_of_pdata(struct max17042_chip *chip)
if (of_property_read_s32(np, "maxim,over-volt", &pdata->vmax))
pdata->vmax = INT_MAX;
+ if (pdata->enable_current_sense &&
+ power_supply_get_battery_info(chip->battery, &info) == 0) {
+ pdata->config_data = devm_kzalloc(dev, sizeof(*pdata->config_data), GFP_KERNEL);
+ if (!pdata->config_data)
+ return NULL;
+
+ if (info->charge_full_design_uah != -EINVAL) {
+ data64 = (u64)info->charge_full_design_uah * pdata->r_sns;
+ do_div(data64, MAX17042_CAPACITY_LSB);
+ pdata->config_data->design_cap = (u16)data64;
+ pdata->enable_por_init = true;
+ }
+ if (info->charge_term_current_ua != -EINVAL) {
+ data64 = (u64)info->charge_term_current_ua * pdata->r_sns;
+ do_div(data64, MAX17042_CURRENT_LSB);
+ pdata->config_data->ichgt_term = (u16)data64;
+ pdata->enable_por_init = true;
+ }
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055) {
+ if (info->voltage_max_design_uv > 4250000) {
+ pdata->config_data->model_cfg = MAX17055_MODELCFG_VCHG_BIT;
+ pdata->enable_por_init = true;
+ }
+ }
+ }
+
return pdata;
}
#endif
@@ -1092,16 +1120,23 @@ static int max17042_probe(struct i2c_client *client,
return -EINVAL;
}
+ i2c_set_clientdata(client, chip);
+ psy_cfg.drv_data = chip;
+ psy_cfg.of_node = dev->of_node;
+
+ chip->battery = devm_power_supply_register(&client->dev, max17042_desc,
+ &psy_cfg);
+ if (IS_ERR(chip->battery)) {
+ dev_err(&client->dev, "failed: power supply register\n");
+ return PTR_ERR(chip->battery);
+ }
+
chip->pdata = max17042_get_pdata(chip);
if (!chip->pdata) {
dev_err(&client->dev, "no platform data provided\n");
return -EINVAL;
}
- i2c_set_clientdata(client, chip);
- psy_cfg.drv_data = chip;
- psy_cfg.of_node = dev->of_node;
-
/* When current is not measured,
* CURRENT_NOW and CURRENT_AVG properties should be invisible. */
if (!chip->pdata->enable_current_sense)
@@ -1122,13 +1157,6 @@ static int max17042_probe(struct i2c_client *client,
regmap_write(chip->regmap, MAX17042_LearnCFG, 0x0007);
}
- chip->battery = devm_power_supply_register(&client->dev, max17042_desc,
- &psy_cfg);
- if (IS_ERR(chip->battery)) {
- dev_err(&client->dev, "failed: power supply register\n");
- return PTR_ERR(chip->battery);
- }
-
if (client->irq) {
unsigned int flags = IRQF_ONESHOT;
@@ -23,6 +23,7 @@
#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
+#define MAX17055_MODELCFG_VCHG_BIT BIT(10)
#define MAX17055_MODELCFG_REFRESH_BIT BIT(15)
enum max17042_register {
So far configuring the gauge was only possible using platform data, with no way to provide the configuration on device tree-based platforms. Change that by looking up the configuration values from monitored-battery property. This is especially useful on models implementing ModelGauge m5 EZ algorithm, such as MAX17055, as all the required configuration can be derived from a "simple-battery" DT node there. In order to be able to access power supply framework in get_of_pdata, move devm_power_supply_register earlier in max17042_probe. Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> --- drivers/power/supply/max17042_battery.c | 50 +++++++++++++++++++------ include/linux/power/max17042_battery.h | 1 + 2 files changed, 40 insertions(+), 11 deletions(-)