diff mbox series

[3/7] iio: sx9324: Add precharge internal resistance setting

Message ID 20220315173042.1325858-4-gwendal@chromium.org
State New
Headers show
Series Add settings for precharge and internal resistor | expand

Commit Message

Gwendal Grignou March 15, 2022, 5:30 p.m. UTC 
Add ability to set the precharge internal resistance from the device
tree.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 drivers/iio/proximity/sx9324.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index 1bef16437aa84..785af857b23a1 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -70,7 +70,8 @@ 
 #define SX9324_REG_AFE_PH2		0x2a
 #define SX9324_REG_AFE_PH3		0x2b
 #define SX9324_REG_AFE_CTRL8		0x2c
-#define SX9324_REG_AFE_CTRL8_RESFILTN_4KOHM 0x02
+#define SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM 0x02
+#define SX9324_REG_AFE_CTRL8_RESFILTIN_MASK GENMASK(3, 0)
 #define SX9324_REG_AFE_CTRL9		0x2d
 #define SX9324_REG_AFE_CTRL9_AGAIN_1	0x08
 
@@ -781,7 +782,7 @@  static const struct sx_common_reg_default sx9324_default_regs[] = {
 	{ SX9324_REG_AFE_PH2, 0x1a },
 	{ SX9324_REG_AFE_PH3, 0x16 },
 
-	{ SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESFILTN_4KOHM },
+	{ SX9324_REG_AFE_CTRL8, 0x10 | SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM },
 	{ SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1 },
 
 	{ SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL0_GAIN_1 |
@@ -891,6 +892,15 @@  sx9324_get_default_reg(struct device *dev, int idx,
 		reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL4_RESOLUTION_MASK,
 					   raw);
 		break;
+	case SX9324_REG_AFE_CTRL8:
+		ret = device_property_read_u32(dev,
+				"semtech,input-precharge-resistor",
+				&raw);
+		reg_def->def &= ~SX9324_REG_AFE_CTRL8_RESFILTIN_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL8_RESFILTIN_MASK,
+					   raw / 2);
+		break;
+
 	case SX9324_REG_ADV_CTRL5:
 		ret = device_property_read_u32(dev, "semtech,startup-sensor",
 					       &start);