@@ -146,6 +146,7 @@
* @startstop_ctrl: setting for register ETMTSSCR.
* @enable_event: setting for register ETMTEEVR.
* @enable_ctrl1: setting for register ETMTECR1.
+ * @enable_ctrl2: setting for register ETMTECR2.
* @fifofull_level: setting for register ETMFFLR.
* @addr_idx: index for the address comparator selection.
* @addr_val: value for address comparator register.
@@ -179,6 +180,7 @@ struct etm_config {
u32 startstop_ctrl;
u32 enable_event;
u32 enable_ctrl1;
+ u32 enable_ctrl2;
u32 fifofull_level;
u8 addr_idx;
u32 addr_val[ETM_MAX_ADDR_CMP];
@@ -567,26 +567,23 @@ static void etm_init_arch_data(void *info)
static void etm_init_default_data(struct etm_config *config)
{
- u32 flags = (1 << 0 | /* instruction execute*/
- 3 << 3 | /* ARM instruction */
- 0 << 5 | /* No data value comparison */
- 0 << 7 | /* No exact mach */
- 0 << 8 | /* Ignore context ID */
- 0 << 10); /* Security ignored */
-
if (WARN_ON_ONCE(!config))
return;
- config->ctrl = (ETMCR_CYC_ACC | ETMCR_TIMESTAMP_EN);
- config->enable_ctrl1 = ETMTECR1_ADDR_COMP_1;
- config->addr_val[0] = (u32) _stext;
- config->addr_val[1] = (u32) _etext;
- config->addr_acctype[0] = flags;
- config->addr_acctype[1] = flags;
- config->addr_type[0] = ETM_ADDR_TYPE_RANGE;
- config->addr_type[1] = ETM_ADDR_TYPE_RANGE;
-
etm_set_default(config);
+
+ /*
+ * Taken verbatim from the TRM:
+ *
+ * To trace all memory:
+ * set bit [24] in register 0x009, the ETMTECR1, to 1
+ * set all other bits in register 0x009, the ETMTECR1, to 0
+ * set all bits in register 0x007, the ETMTECR2, to 0
+ * set register 0x008, the ETMTEEVR, to 0x6F (TRUE).
+ */
+ config->enable_ctrl1 = BIT(24);
+ config->enable_ctrl2 = 0x0;
+ config->enable_event = ETM_HARD_WIRE_RES_A;
}
static void etm_init_trace_id(struct etm_drvdata *drvdata)
Changing default configuration to include the entire address range rather than just the kernel. That way traces are more inclusive and it is easier to narrow down if needed. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> --- drivers/hwtracing/coresight/coresight-etm.h | 2 ++ drivers/hwtracing/coresight/coresight-etm3x.c | 29 ++++++++++++--------------- 2 files changed, 15 insertions(+), 16 deletions(-)