diff mbox series

[v2,2/2] tty: serial: samsung: Add ARTPEC-8 support

Message ID 20220311094515.3223023-3-vincent.whitchurch@axis.com
State New
Headers show
Series Add support for ARTPEC-8 UART | expand

Commit Message

Vincent Whitchurch March 11, 2022, 9:45 a.m. UTC 
Add support for the UART block on the ARTPEC-8 SoC.  This is closely
related to the variants used on the Exynos chips.  The register layout
is identical to Exynos850 et al but the fifo size is different (64 bytes
in each direction for all instances).

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
---

Notes:
    v2:
    - Added Krzysztof's Reviewed-by.
    - Expanded commit message
    - Fixed fifo size
    - Rebased on top of Krzysztof's "minor fixes/cleanups" series.  This needed a
      couple of fixes for build errors.
    
    (I'm always unsure if Reviewed-by should be carried over or not if the fixes
    are minor.  I apologize in advance if carring it over was the wrong thing to do
    in this case.)

 drivers/tty/serial/Kconfig       |  2 +-
 drivers/tty/serial/samsung_tty.c | 37 ++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski March 11, 2022, 10:44 a.m. UTC | #1 
On 11/03/2022 11:42, Krzysztof Kozlowski wrote:
> On 11/03/2022 10:45, Vincent Whitchurch wrote:
>> Add support for the UART block on the ARTPEC-8 SoC.  This is closely
>> related to the variants used on the Exynos chips.  The register layout
>> is identical to Exynos850 et al but the fifo size is different (64 bytes
>> in each direction for all instances).
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
>> ---
>>
>> Notes:
>>     v2:
>>     - Added Krzysztof's Reviewed-by.
>>     - Expanded commit message
>>     - Fixed fifo size
>>     - Rebased on top of Krzysztof's "minor fixes/cleanups" series.  This needed a
>>       couple of fixes for build errors.
>>     
>>     (I'm always unsure if Reviewed-by should be carried over or not if the fixes
>>     are minor.  I apologize in advance if carring it over was the wrong thing to do
>>     in this case.)
> 
> For minor fixes, usually we carry Rb tag over. It's fine.
> 

Hi Greg,

Just one note for you - this depends now on my v3 patchset here:
https://lore.kernel.org/all/20220308080919.152715-1-krzysztof.kozlowski@canonical.com/


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0e5ccb25bdb1..bd46e35ded40 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -236,7 +236,7 @@  config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
+	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 74d466cc4152..7d011d3fa3a6 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2828,6 +2828,36 @@  static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
 #define S5L_SERIAL_DRV_DATA NULL
 #endif
 
+#if defined(CONFIG_ARCH_ARTPEC)
+static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
+	.info = {
+		.name		= "Axis ARTPEC-8 UART",
+		.type		= TYPE_S3C6400,
+		.port_type	= PORT_S3C6400,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+	},
+	.def_cfg = {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.has_fracval	= 1,
+	}
+};
+#define ARTPEC8_SERIAL_DRV_DATA (&artpec8_serial_drv_data)
+#else
+#define ARTPEC8_SERIAL_DRV_DATA (NULL)
+#endif
+
 static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	{
 		.name		= "s3c2410-uart",
@@ -2856,6 +2886,9 @@  static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	}, {
 		.name		= "exynos850-uart",
 		.driver_data	= (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA,
+	}, {
+		.name		= "artpec8-uart",
+		.driver_data	= (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
 	},
 	{ },
 };
@@ -2881,6 +2914,8 @@  static const struct of_device_id s3c24xx_uart_dt_match[] = {
 		.data = S5L_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos850-uart",
 		.data = EXYNOS850_SERIAL_DRV_DATA },
+	{ .compatible = "axis,artpec8-uart",
+		.data = ARTPEC8_SERIAL_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
@@ -3034,6 +3069,8 @@  OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
 			s5pv210_early_console_setup);
 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
 			s5pv210_early_console_setup);
+OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart",
+			s5pv210_early_console_setup);
 
 /* Apple S5L */
 static int __init apple_s5l_early_console_setup(struct earlycon_device *device,