diff mbox series

[v2,5/6] arm64: dts: qcom: sm8250: Drop flags for mdss irqs

Message ID 20220302225411.2456001-5-dmitry.baryshkov@linaro.org
State Accepted
Commit 0316da6bbcb7d78017f8f177399bff5ff889456a
Headers show
Series [v2,1/6] arm64: dts: qcom: msm8996: Drop flags for mdss irqs | expand

Commit Message

Dmitry Baryshkov March 2, 2022, 10:54 p.m. UTC 
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303ba047..956848068871 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3200,7 +3200,7 @@  mdss_mdp: mdp@ae01000 {
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -3252,7 +3252,7 @@  dsi0: dsi@ae94000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3325,7 +3325,7 @@  dsi1: dsi@ae96000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,