new file mode 100644
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AVM WASP processor controller bindings
+
+maintainers:
+ - Daniel Kestrel <kestrelseventyfour@gmail.com>
+
+description: |
+ This document defines the bindings for the remoteproc component that loads and
+ boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
+ that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
+
+properties:
+ compatible:
+ enum:
+ - avm,fritzbox3390-wasp
+ - avm,fritzboxx490-wasp
+
+ avm,wasp-mdio:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Lantiq GSWIP switch mdio.
+
+ avm,wasp-port:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Network port, where the WASP SoC is connected to.
+
+ avm,reset-gpios:
+ description: Reset gpio of the WASP SoC.
+
+ avm,startup-gpios:
+ description: Startup gpio of the WASP SoC.
+
+required:
+ - compatible
+ - avm,wasp-mdio
+ - avm,wasp-port
+ - avm,reset-gpios
+ - avm,startup-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ remoteproc {
+ compatible = "avm,fritzboxx490-wasp";
+ avm,wasp-mdio = <&gswip_mdio>;
+ avm,wasp-port = <&port5>;
+ avm,reset-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ avm,startup-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
AVM Fritzbox router boards may contain an additional ATH79 based SoC that has the wifi cards connected. This patch adds bindings for this remote processor. Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com> --- .../bindings/remoteproc/avm,wasp-rproc.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml