@@ -60,6 +60,11 @@ struct ov7251_mode_info {
struct v4l2_fract timeperframe;
};
+enum supported_link_freqs {
+ OV7251_LINK_FREQ_240_MHZ,
+ OV7251_NUM_SUPPORTED_LINK_FREQS
+};
+
struct ov7251 {
struct i2c_client *i2c_client;
struct device *dev;
@@ -75,6 +80,7 @@ struct ov7251 {
struct regulator *core_regulator;
struct regulator *analog_regulator;
+ enum supported_link_freqs link_freq_idx;
const struct ov7251_mode_info *current_mode;
struct v4l2_ctrl_handler ctrls;
@@ -1255,10 +1261,61 @@ static const struct v4l2_subdev_ops ov7251_subdev_ops = {
.pad = &ov7251_subdev_pad_ops,
};
+static int ov7251_check_hwcfg(struct ov7251 *ov7251)
+{
+ struct fwnode_handle *fwnode = dev_fwnode(ov7251->dev);
+ struct v4l2_fwnode_endpoint bus_cfg = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY,
+ };
+ struct fwnode_handle *endpoint;
+ bool freq_found = false;
+ unsigned int i, j;
+ int ret;
+
+ endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL);
+ if (!endpoint)
+ return -EPROBE_DEFER; /* could be provided by cio2-bridge */
+
+ ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
+ fwnode_handle_put(endpoint);
+ if (ret)
+ return dev_err_probe(ov7251->dev, ret,
+ "parsing endpoint node failed\n");
+
+ if (!bus_cfg.nr_of_link_frequencies) {
+ dev_err(ov7251->dev, "no link frequencies defined\n");
+ ret = -EINVAL;
+ goto out_free_bus_cfg;
+ }
+
+ for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) {
+ for (j = 0; j < ARRAY_SIZE(link_freq); j++)
+ if (bus_cfg.link_frequencies[i] == link_freq[j]) {
+ freq_found = true;
+ break;
+ }
+
+ if (freq_found)
+ break;
+ }
+
+ if (i == bus_cfg.nr_of_link_frequencies) {
+ dev_err(ov7251->dev, "no supported link freq found\n");
+ ret = -EINVAL;
+ goto out_free_bus_cfg;
+ }
+
+ ov7251->link_freq_idx = i;
+
+out_free_bus_cfg:
+ v4l2_fwnode_endpoint_free(&bus_cfg);
+
+ return ret;
+}
+
static int ov7251_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
- struct fwnode_handle *endpoint;
struct ov7251 *ov7251;
u8 chip_id_high, chip_id_low, chip_rev;
int ret;
@@ -1270,24 +1327,9 @@ static int ov7251_probe(struct i2c_client *client)
ov7251->i2c_client = client;
ov7251->dev = dev;
- endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
- if (!endpoint) {
- dev_err(dev, "endpoint node not found\n");
- return -EINVAL;
- }
-
- ret = v4l2_fwnode_endpoint_parse(endpoint, &ov7251->ep);
- fwnode_handle_put(endpoint);
- if (ret < 0) {
- dev_err(dev, "parsing endpoint node failed\n");
+ ret = ov7251_check_hwcfg(ov7251);
+ if (ret)
return ret;
- }
-
- if (ov7251->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
- dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
- ov7251->ep.bus_type, V4L2_MBUS_CSI2_DPHY);
- return -EINVAL;
- }
/* get system clock (xclk) */
ov7251->xclk = devm_clk_get(dev, "xclk");
Move the endpoint checking from .probe() to a dedicated function, and additionally check that the firmware provided link frequencies are a match for those supported by the driver. Store the index to the matching link frequency so it can be easily identified later. Signed-off-by: Daniel Scally <djrscally@gmail.com> --- Changes in v2: - Switched to use unsigned int (Sakari) - Dropped the checks for bus_type and number of data lanes (Sakari) - Fixed the double-loop break (Dave) - Stored the index to the configured link frequency so it can be used later on. drivers/media/i2c/ov7251.c | 78 +++++++++++++++++++++++++++++--------- 1 file changed, 60 insertions(+), 18 deletions(-)