@@ -17,15 +17,16 @@
#define __ASM_MMU_H
typedef struct {
- unsigned int id;
- raw_spinlock_t id_lock;
- void *vdso;
+ atomic64_t id;
+ void *vdso;
} mm_context_t;
-#define INIT_MM_CONTEXT(name) \
- .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock),
-
-#define ASID(mm) ((mm)->context.id & 0xffff)
+/*
+ * This macro is only used by the TLBI code, which cannot race with an
+ * ASID change and therefore doesn't need to reload the counter using
+ * atomic64_read.
+ */
+#define ASID(mm) ((mm)->context.id.counter & 0xffff)
extern void paging_init(void);
extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt);
@@ -28,13 +28,6 @@
#include <asm/cputype.h>
#include <asm/pgtable.h>
-#define MAX_ASID_BITS 16
-
-extern unsigned int cpu_last_asid;
-
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void __new_context(struct mm_struct *mm);
-
#ifdef CONFIG_PID_IN_CONTEXTIDR
static inline void contextidr_thread_switch(struct task_struct *next)
{
@@ -96,66 +89,19 @@ static inline void cpu_set_default_tcr_t0sz(void)
: "r"(TCR_T0SZ(VA_BITS)), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
}
-static inline void switch_new_context(struct mm_struct *mm)
-{
- unsigned long flags;
-
- __new_context(mm);
-
- local_irq_save(flags);
- cpu_switch_mm(mm->pgd, mm);
- local_irq_restore(flags);
-}
-
-static inline void check_and_switch_context(struct mm_struct *mm,
- struct task_struct *tsk)
-{
- /*
- * Required during context switch to avoid speculative page table
- * walking with the wrong TTBR.
- */
- cpu_set_reserved_ttbr0();
-
- if (!((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS))
- /*
- * The ASID is from the current generation, just switch to the
- * new pgd. This condition is only true for calls from
- * context_switch() and interrupts are already disabled.
- */
- cpu_switch_mm(mm->pgd, mm);
- else if (irqs_disabled())
- /*
- * Defer the new ASID allocation until after the context
- * switch critical region since __new_context() cannot be
- * called with interrupts disabled.
- */
- set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
- else
- /*
- * That is a direct call to switch_mm() or activate_mm() with
- * interrupts enabled and a new context.
- */
- switch_new_context(mm);
-}
-
-#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0)
+/*
+ * It would be nice to return ASIDs back to the allocator, but unfortunately
+ * that introduces a race with a generation rollover where we could erroneously
+ * free an ASID allocated in a future generation. We could workaround this by
+ * freeing the ASID from the context of the dying mm (e.g. in arch_exit_mmap),
+ * but we'd then need to make sure that we didn't dirty any TLBs afterwards.
+ * Setting a reserved TTBR0 or EPD0 would work, but it all gets ugly when you
+ * take CPU migration into account.
+ */
#define destroy_context(mm) do { } while(0)
+void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
-#define finish_arch_post_lock_switch \
- finish_arch_post_lock_switch
-static inline void finish_arch_post_lock_switch(void)
-{
- if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
- struct mm_struct *mm = current->mm;
- unsigned long flags;
-
- __new_context(mm);
-
- local_irq_save(flags);
- cpu_switch_mm(mm->pgd, mm);
- local_irq_restore(flags);
- }
-}
+#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
/*
* This is called when "tsk" is about to enter lazy TLB mode.
@@ -111,7 +111,6 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_RESTORE_SIGMASK 20
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
-#define TIF_SWITCH_MM 23 /* deferred switch_mm */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -60,7 +60,7 @@ int main(void)
DEFINE(S_SYSCALLNO, offsetof(struct pt_regs, syscallno));
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
BLANK();
- DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id));
+ DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id.counter));
BLANK();
DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm));
DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags));
@@ -48,7 +48,6 @@ static struct mm_struct efi_mm = {
.mmap_sem = __RWSEM_INITIALIZER(efi_mm.mmap_sem),
.page_table_lock = __SPIN_LOCK_UNLOCKED(efi_mm.page_table_lock),
.mmlist = LIST_HEAD_INIT(efi_mm.mmlist),
- INIT_MM_CONTEXT(efi_mm)
};
static int uefi_debug __initdata;
@@ -17,135 +17,187 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/init.h>
+#include <linux/bitops.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
+#include <asm/cpufeature.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
-#include <asm/cachetype.h>
-#define asid_bits(reg) \
- (((read_cpuid(ID_AA64MMFR0_EL1) & 0xf0) >> 2) + 8)
+static u32 asid_bits;
+static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
-#define ASID_FIRST_VERSION (1 << MAX_ASID_BITS)
+static atomic64_t asid_generation;
+static unsigned long *asid_map;
-static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
-unsigned int cpu_last_asid = ASID_FIRST_VERSION;
+static DEFINE_PER_CPU(atomic64_t, active_asids);
+static DEFINE_PER_CPU(u64, reserved_asids);
+static cpumask_t tlb_flush_pending;
-/*
- * We fork()ed a process, and we need a new context for the child to run in.
- */
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+#define ASID_MASK (~GENMASK(asid_bits - 1, 0))
+#define ASID_FIRST_VERSION (1UL << asid_bits)
+#define NUM_USER_ASIDS ASID_FIRST_VERSION
+
+static void flush_context(unsigned int cpu)
{
- mm->context.id = 0;
- raw_spin_lock_init(&mm->context.id_lock);
+ int i;
+ u64 asid;
+
+ /* Update the list of reserved ASIDs and the ASID bitmap. */
+ bitmap_clear(asid_map, 0, NUM_USER_ASIDS);
+
+ /*
+ * Ensure the generation bump is observed before we xchg the
+ * active_asids.
+ */
+ smp_wmb();
+
+ for_each_possible_cpu(i) {
+ asid = atomic64_xchg_relaxed(&per_cpu(active_asids, i), 0);
+ /*
+ * If this CPU has already been through a
+ * rollover, but hasn't run another task in
+ * the meantime, we must preserve its reserved
+ * ASID, as this is the only trace we have of
+ * the process it is still running.
+ */
+ if (asid == 0)
+ asid = per_cpu(reserved_asids, i);
+ __set_bit(asid & ~ASID_MASK, asid_map);
+ per_cpu(reserved_asids, i) = asid;
+ }
+
+ /* Queue a TLB invalidate and flush the I-cache if necessary. */
+ cpumask_setall(&tlb_flush_pending);
+
+ if (icache_is_aivivt())
+ __flush_icache_all();
}
-static void flush_context(void)
+static int is_reserved_asid(u64 asid)
{
- /* set the reserved TTBR0 before flushing the TLB */
- cpu_set_reserved_ttbr0();
- local_flush_tlb_all();
- if (icache_is_aivivt())
- __local_flush_icache_all();
+ int cpu;
+ for_each_possible_cpu(cpu)
+ if (per_cpu(reserved_asids, cpu) == asid)
+ return 1;
+ return 0;
}
-static void set_mm_context(struct mm_struct *mm, unsigned int asid)
+static u64 new_context(struct mm_struct *mm, unsigned int cpu)
{
- unsigned long flags;
+ static u32 cur_idx = 1;
+ u64 asid = atomic64_read(&mm->context.id);
+ u64 generation = atomic64_read(&asid_generation);
- /*
- * Locking needed for multi-threaded applications where the same
- * mm->context.id could be set from different CPUs during the
- * broadcast. This function is also called via IPI so the
- * mm->context.id_lock has to be IRQ-safe.
- */
- raw_spin_lock_irqsave(&mm->context.id_lock, flags);
- if (likely((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS)) {
+ if (asid != 0) {
/*
- * Old version of ASID found. Set the new one and reset
- * mm_cpumask(mm).
+ * If our current ASID was active during a rollover, we
+ * can continue to use it and this was just a false alarm.
*/
- mm->context.id = asid;
- cpumask_clear(mm_cpumask(mm));
+ if (is_reserved_asid(asid))
+ return generation | (asid & ~ASID_MASK);
+
+ /*
+ * We had a valid ASID in a previous life, so try to re-use
+ * it if possible.
+ */
+ asid &= ~ASID_MASK;
+ if (!__test_and_set_bit(asid, asid_map))
+ goto bump_gen;
}
- raw_spin_unlock_irqrestore(&mm->context.id_lock, flags);
/*
- * Set the mm_cpumask(mm) bit for the current CPU.
+ * Allocate a free ASID. If we can't find one, take a note of the
+ * currently active ASIDs and mark the TLBs as requiring flushes.
+ * We always count from ASID #1, as we use ASID #0 when setting a
+ * reserved TTBR0 for the init_mm.
*/
- cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx);
+ if (asid != NUM_USER_ASIDS)
+ goto set_asid;
+
+ /* We're out of ASIDs, so increment the global generation count */
+ generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION,
+ &asid_generation);
+ flush_context(cpu);
+
+ /* We have at least 1 ASID per CPU, so this will always succeed */
+ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
+
+set_asid:
+ __set_bit(asid, asid_map);
+ cur_idx = asid;
+
+bump_gen:
+ asid |= generation;
+ cpumask_clear(mm_cpumask(mm));
+ return asid;
}
-/*
- * Reset the ASID on the current CPU. This function call is broadcast from the
- * CPU handling the ASID rollover and holding cpu_asid_lock.
- */
-static void reset_context(void *info)
+void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
{
- unsigned int asid;
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm = current->active_mm;
+ unsigned long flags;
+ u64 asid;
+
+ asid = atomic64_read(&mm->context.id);
/*
- * current->active_mm could be init_mm for the idle thread immediately
- * after secondary CPU boot or hotplug. TTBR0_EL1 is already set to
- * the reserved value, so no need to reset any context.
+ * The memory ordering here is subtle. We rely on the control
+ * dependency between the generation read and the update of
+ * active_asids to ensure that we are synchronised with a
+ * parallel rollover (i.e. this pairs with the smp_wmb() in
+ * flush_context).
*/
- if (mm == &init_mm)
- return;
+ if (!((asid ^ atomic64_read(&asid_generation)) >> asid_bits)
+ && atomic64_xchg_relaxed(&per_cpu(active_asids, cpu), asid))
+ goto switch_mm_fastpath;
+
+ raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+ /* Check that our ASID belongs to the current generation. */
+ asid = atomic64_read(&mm->context.id);
+ if ((asid ^ atomic64_read(&asid_generation)) >> asid_bits) {
+ asid = new_context(mm, cpu);
+ atomic64_set(&mm->context.id, asid);
+ }
- smp_rmb();
- asid = cpu_last_asid + cpu;
+ if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending))
+ local_flush_tlb_all();
- flush_context();
- set_mm_context(mm, asid);
+ atomic64_set(&per_cpu(active_asids, cpu), asid);
+ cpumask_set_cpu(cpu, mm_cpumask(mm));
+ raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
- /* set the new ASID */
+switch_mm_fastpath:
cpu_switch_mm(mm->pgd, mm);
}
-void __new_context(struct mm_struct *mm)
+static int asids_init(void)
{
- unsigned int asid;
- unsigned int bits = asid_bits();
-
- raw_spin_lock(&cpu_asid_lock);
- /*
- * Check the ASID again, in case the change was broadcast from another
- * CPU before we acquired the lock.
- */
- if (!unlikely((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS)) {
- cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
- raw_spin_unlock(&cpu_asid_lock);
- return;
- }
- /*
- * At this point, it is guaranteed that the current mm (with an old
- * ASID) isn't active on any other CPU since the ASIDs are changed
- * simultaneously via IPI.
- */
- asid = ++cpu_last_asid;
-
- /*
- * If we've used up all our ASIDs, we need to start a new version and
- * flush the TLB.
- */
- if (unlikely((asid & ((1 << bits) - 1)) == 0)) {
- /* increment the ASID version */
- cpu_last_asid += (1 << MAX_ASID_BITS) - (1 << bits);
- if (cpu_last_asid == 0)
- cpu_last_asid = ASID_FIRST_VERSION;
- asid = cpu_last_asid + smp_processor_id();
- flush_context();
- smp_wmb();
- smp_call_function(reset_context, NULL, 1);
- cpu_last_asid += NR_CPUS - 1;
+ int fld = cpuid_feature_extract_field(read_cpuid(ID_AA64MMFR0_EL1), 4);
+
+ switch (fld) {
+ default:
+ pr_warn("Unknown ASID size (%d); assuming 8-bit\n", fld);
+ /* Fallthrough */
+ case 0:
+ asid_bits = 8;
+ break;
+ case 2:
+ asid_bits = 16;
}
- set_mm_context(mm, asid);
- raw_spin_unlock(&cpu_asid_lock);
+ /* If we end up with more CPUs than ASIDs, expect things to crash */
+ WARN_ON(NUM_USER_ASIDS < num_possible_cpus());
+ atomic64_set(&asid_generation, ASID_FIRST_VERSION);
+ asid_map = kzalloc(BITS_TO_LONGS(NUM_USER_ASIDS) * sizeof(*asid_map),
+ GFP_KERNEL);
+ if (!asid_map)
+ panic("Failed to allocate bitmap for %lu ASIDs\n",
+ NUM_USER_ASIDS);
+
+ pr_info("ASID allocator initialised with %lu entries\n", NUM_USER_ASIDS);
+ return 0;
}
+early_initcall(asids_init);
@@ -130,7 +130,7 @@ ENDPROC(cpu_do_resume)
* - pgd_phys - physical address of new TTB
*/
ENTRY(cpu_do_switch_mm)
- mmid w1, x1 // get mm->context.id
+ mmid x1, x1 // get mm->context.id
bfi x0, x1, #48, #16 // set the ASID
msr ttbr0_el1, x0 // set TTBR0
isb
Our current switch_mm implementation suffers from a number of problems: (1) The ASID allocator relies on IPIs to synchronise the CPUs on a rollover event (2) Because of (1), we cannot allocate ASIDs with interrupts disabled and therefore make use of a TIF_SWITCH_MM flag to postpone the actual switch to finish_arch_post_lock_switch (3) We run context switch with a reserved (invalid) TTBR0 value, even though the ASID and pgd are updated atomically (4) We take a global spinlock (cpu_asid_lock) during context-switch (5) We use h/w broadcast TLB operations when they are not required (e.g. in flush_context) This patch addresses these problems by rewriting the ASID algorithm to match the bitmap-based arch/arm/ implementation more closely. This in turn allows us to remove much of the complications surrounding switch_mm, including the ugly thread flag. Signed-off-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/include/asm/mmu.h | 15 +-- arch/arm64/include/asm/mmu_context.h | 76 ++--------- arch/arm64/include/asm/thread_info.h | 1 - arch/arm64/kernel/asm-offsets.c | 2 +- arch/arm64/kernel/efi.c | 1 - arch/arm64/mm/context.c | 238 +++++++++++++++++++++-------------- arch/arm64/mm/proc.S | 2 +- 7 files changed, 166 insertions(+), 169 deletions(-)