| Message ID | 1443828205-18706-2-git-send-email-s-anna@ti.com |
|---|---|
| State | Accepted |
| Commit | 99639ace4c83f26698d5a524df01c9a9c2c8c7b6 |
| Headers | show |
* Suman Anna <s-anna@ti.com> [151002 16:27]: > The DSP_SYSTEM sub-module is a dedicated system control logic > module present within a DRA7 DSP processor sub-system. This > module is responsible for power management, clock generation > and connection to the device PRCM module. > > Add a syscon node for this module for the DSP1 processor > sub-system. This is added as a syscon node as it is a common > configuration module that can be used by the different IOMMU > instances and the corresponding remoteproc device. > > The node is added to the common dra7.dtsi file, as the DSP1 > processor sub-system is mostly common across all the variants > of the DRA7 SoC family. > > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index e289c706d27d..62055094e8d5 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -292,6 +292,11 @@ > #thermal-sensor-cells = <1>; > }; > > + dsp1_system: dsp_system@40d00000 { > + compatible = "syscon"; > + reg = <0x40d00000 0x100>; > + }; > + > sdma: dma-controller@4a056000 { > compatible = "ti,omap4430-sdma"; > reg = <0x4a056000 0x1000>; Hmm so why would you want to set up a complete device as a syscon mapping rather than just doing ioremap on it? What drivers will be sharing access to these registers? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On 10/12/2015 04:43 PM, Tony Lindgren wrote: > * Suman Anna <s-anna@ti.com> [151002 16:27]: >> The DSP_SYSTEM sub-module is a dedicated system control logic >> module present within a DRA7 DSP processor sub-system. This >> module is responsible for power management, clock generation >> and connection to the device PRCM module. >> >> Add a syscon node for this module for the DSP1 processor >> sub-system. This is added as a syscon node as it is a common >> configuration module that can be used by the different IOMMU >> instances and the corresponding remoteproc device. >> >> The node is added to the common dra7.dtsi file, as the DSP1 >> processor sub-system is mostly common across all the variants >> of the DRA7 SoC family. >> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> --- >> arch/arm/boot/dts/dra7.dtsi | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi >> index e289c706d27d..62055094e8d5 100644 >> --- a/arch/arm/boot/dts/dra7.dtsi >> +++ b/arch/arm/boot/dts/dra7.dtsi >> @@ -292,6 +292,11 @@ >> #thermal-sensor-cells = <1>; >> }; >> >> + dsp1_system: dsp_system@40d00000 { >> + compatible = "syscon"; >> + reg = <0x40d00000 0x100>; >> + }; >> + >> sdma: dma-controller@4a056000 { >> compatible = "ti,omap4430-sdma"; >> reg = <0x4a056000 0x1000>; > > Hmm so why would you want to set up a complete device as a syscon > mapping rather than just doing ioremap on it? > > What drivers will be sharing access to these registers? Two different instances of the MMU for now, both get probed independently. But there are other registers which a remoteproc driver will mostly be interested in (like DSP_SYS_STAT for knowing the C66x idle/active status). regards Suman -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Suman Anna <s-anna@ti.com> [151012 15:37]: > Hi Tony, > > On 10/12/2015 04:43 PM, Tony Lindgren wrote: > > * Suman Anna <s-anna@ti.com> [151002 16:27]: > >> The DSP_SYSTEM sub-module is a dedicated system control logic > >> module present within a DRA7 DSP processor sub-system. This > >> module is responsible for power management, clock generation > >> and connection to the device PRCM module. > >> > >> Add a syscon node for this module for the DSP1 processor > >> sub-system. This is added as a syscon node as it is a common > >> configuration module that can be used by the different IOMMU > >> instances and the corresponding remoteproc device. > >> > >> The node is added to the common dra7.dtsi file, as the DSP1 > >> processor sub-system is mostly common across all the variants > >> of the DRA7 SoC family. > >> > >> Signed-off-by: Suman Anna <s-anna@ti.com> > >> --- > >> arch/arm/boot/dts/dra7.dtsi | 5 +++++ > >> 1 file changed, 5 insertions(+) > >> > >> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > >> index e289c706d27d..62055094e8d5 100644 > >> --- a/arch/arm/boot/dts/dra7.dtsi > >> +++ b/arch/arm/boot/dts/dra7.dtsi > >> @@ -292,6 +292,11 @@ > >> #thermal-sensor-cells = <1>; > >> }; > >> > >> + dsp1_system: dsp_system@40d00000 { > >> + compatible = "syscon"; > >> + reg = <0x40d00000 0x100>; > >> + }; > >> + > >> sdma: dma-controller@4a056000 { > >> compatible = "ti,omap4430-sdma"; > >> reg = <0x4a056000 0x1000>; > > > > Hmm so why would you want to set up a complete device as a syscon > > mapping rather than just doing ioremap on it? > > > > What drivers will be sharing access to these registers? > > Two different instances of the MMU for now, both get probed > independently. But there are other registers which a remoteproc driver > will mostly be interested in (like DSP_SYS_STAT for knowing the C66x > idle/active status). OK makes sense to me then. Thanks, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e289c706d27d..62055094e8d5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -292,6 +292,11 @@ #thermal-sensor-cells = <1>; }; + dsp1_system: dsp_system@40d00000 { + compatible = "syscon"; + reg = <0x40d00000 0x100>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>;
The DSP_SYSTEM sub-module is a dedicated system control logic module present within a DRA7 DSP processor sub-system. This module is responsible for power management, clock generation and connection to the device PRCM module. Add a syscon node for this module for the DSP1 processor sub-system. This is added as a syscon node as it is a common configuration module that can be used by the different IOMMU instances and the corresponding remoteproc device. The node is added to the common dra7.dtsi file, as the DSP1 processor sub-system is mostly common across all the variants of the DRA7 SoC family. Signed-off-by: Suman Anna <s-anna@ti.com> --- arch/arm/boot/dts/dra7.dtsi | 5 +++++ 1 file changed, 5 insertions(+)