@@ -56,7 +56,7 @@
};
partition@180000 {
- label = "FIP-TFA";
+ label = "LegacyFIP";
reg = <0x180000 0x78000>;
};
@@ -66,18 +66,28 @@
};
partition@200000 {
- label = "U-Boot";
- reg = <0x200000 0x100000>;
+ label = "EDK2";
+ reg = <0x200000 0x200000>;
};
- partition@300000 {
- label = "UBoot-Env";
- reg = <0x300000 0x100000>;
+ partition@400000 {
+ label = "EDK2-Env";
+ reg = <0x400000 0x100000>;
};
partition@500000 {
- label = "Ex-OPTEE";
- reg = <0x500000 0x200000>;
+ label = "Metadata";
+ reg = <0x500000 0x80000>;
+ };
+
+ partition@580000 {
+ label = "UBoot-Env";
+ reg = <0x580000 0x80000>;
+ };
+
+ partition@600000 {
+ label = "FIP";
+ reg = <0x600000 0x400000>;
};
};
};
@@ -1,9 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_SYNQUACER=y
-CONFIG_SYS_TEXT_BASE=0x08200000
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SYS_TEXT_BASE=0
CONFIG_SYS_MALLOC_LEN=0x1000000
CONFIG_ENV_SIZE=0x30000
-CONFIG_ENV_OFFSET=0x300000
+CONFIG_ENV_OFFSET=0x580000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox"
@@ -52,9 +52,7 @@
/* #define CONFIG_SYS_PCI_64BIT 1 */
#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
- "mtd nor1=u-boot.bin raw 200000 100000;" \
- "fip.bin raw 180000 78000;" \
- "optee.bin raw 500000 100000\0"
+ "mtd nor1=fip.bin raw 600000 400000\0"
/* Distro boot settings */
#ifndef CONFIG_SPL_BUILD
This changes SPI NOR flash partition layout for TBBR and also make the U-Boot as position independent executable again because BL33 is loaded on the memory. With enabling TBBR, TF-A BL2 loads all BL3x images from FIP image, and the U-Boot image is added to the FIP image as BL33, and loaded to memory when boot instead of XIP on SPI NOR flash. To avoid mixing up with the legacy images, this new FIP image is stored on unused area (0x600000-) and the U-Boot env vars are also stored at 0x580000 so that it will not break existing EDK2 area. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> --- .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 26 ++++++++++++++------ configs/synquacer_developerbox_defconfig | 5 ++-- include/configs/synquacer.h | 4 +-- 3 files changed, 22 insertions(+), 13 deletions(-)