@@ -1165,13 +1165,7 @@ static bool rtw89_core_rx_ppdu_match(struct rtw89_dev *rtwdev,
rtw89_warn(rtwdev, "invalid RX rate mode %d\n", data_rate_mode);
}
- if (desc_info->bw == RTW89_CHANNEL_WIDTH_80)
- bw = RATE_INFO_BW_80;
- else if (desc_info->bw == RTW89_CHANNEL_WIDTH_40)
- bw = RATE_INFO_BW_40;
- else
- bw = RATE_INFO_BW_20;
-
+ bw = rtw89_hw_to_rate_info_bw(desc_info->bw);
gi_ltf = rtw89_rxdesc_to_nl_he_gi(rtwdev, desc_info, false);
ret = rtwdev->ppdu_sts.curr_rx_ppdu_cnt[band] == desc_info->ppdu_cnt &&
status->rate_idx == rate_idx &&
@@ -1442,12 +1436,7 @@ static void rtw89_core_update_rx_status(struct rtw89_dev *rtwdev,
!(desc_info->sw_dec || desc_info->icv_err))
rx_status->flag |= RX_FLAG_DECRYPTED;
- if (desc_info->bw == RTW89_CHANNEL_WIDTH_80)
- rx_status->bw = RATE_INFO_BW_80;
- else if (desc_info->bw == RTW89_CHANNEL_WIDTH_40)
- rx_status->bw = RATE_INFO_BW_40;
- else
- rx_status->bw = RATE_INFO_BW_20;
+ rx_status->bw = rtw89_hw_to_rate_info_bw(desc_info->bw);
data_rate = desc_info->data_rate;
data_rate_mode = GET_DATA_RATE_MODE(data_rate);
@@ -3160,6 +3160,18 @@ static inline struct rtw89_sta *sta_to_rtwsta_safe(struct ieee80211_sta *sta)
return sta ? (struct rtw89_sta *)sta->drv_priv : NULL;
}
+static inline u8 rtw89_hw_to_rate_info_bw(enum rtw89_bandwidth hw_bw)
+{
+ if (hw_bw == RTW89_CHANNEL_WIDTH_160)
+ return RATE_INFO_BW_160;
+ else if (hw_bw == RTW89_CHANNEL_WIDTH_80)
+ return RATE_INFO_BW_80;
+ else if (hw_bw == RTW89_CHANNEL_WIDTH_40)
+ return RATE_INFO_BW_40;
+ else
+ return RATE_INFO_BW_20;
+}
+
static inline
struct rtw89_addr_cam_entry *rtw89_get_addr_cam_of(struct rtw89_vif *rtwvif,
struct rtw89_sta *rtwsta)
@@ -302,6 +302,11 @@ static void rtw89_phy_ra_sta_update(struct rtw89_dev *rtwdev,
ra_mask &= rtw89_phy_ra_mask_cfg(rtwdev, rtwsta);
switch (sta->bandwidth) {
+ case IEEE80211_STA_RX_BW_160:
+ bw_mode = RTW89_CHANNEL_WIDTH_160;
+ sgi = sta->vht_cap.vht_supported &&
+ (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_160);
+ break;
case IEEE80211_STA_RX_BW_80:
bw_mode = RTW89_CHANNEL_WIDTH_80;
sgi = sta->vht_cap.vht_supported &&
@@ -1439,13 +1444,7 @@ static void rtw89_phy_c2h_ra_rpt_iter(void *data, struct ieee80211_sta *sta)
break;
}
- if (bw == RTW89_CHANNEL_WIDTH_80)
- ra_report->txrate.bw = RATE_INFO_BW_80;
- else if (bw == RTW89_CHANNEL_WIDTH_40)
- ra_report->txrate.bw = RATE_INFO_BW_40;
- else
- ra_report->txrate.bw = RATE_INFO_BW_20;
-
+ ra_report->txrate.bw = rtw89_hw_to_rate_info_bw(bw);
ra_report->bit_rate = cfg80211_calculate_bitrate(&ra_report->txrate);
ra_report->hw_rate = FIELD_PREP(RTW89_HW_RATE_MASK_MOD, mode) |
FIELD_PREP(RTW89_HW_RATE_MASK_VAL, rate);
Apply 160M bandwidth to RA (rate adaptive) mechanism, so it can transmit packets with this bandwidth. On the other hand, convert 160M bandwidth from RX desc to rx_info_bw. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> --- drivers/net/wireless/realtek/rtw89/core.c | 15 ++------------- drivers/net/wireless/realtek/rtw89/core.h | 12 ++++++++++++ drivers/net/wireless/realtek/rtw89/phy.c | 13 ++++++------- 3 files changed, 20 insertions(+), 20 deletions(-)