diff mbox series

[v2] ASoC: tas2770: Insert post reset delay

Message ID 20220204095301.5554-1-povik+lin@cutebit.org
State Accepted
Commit 307f31452078792aab94a729fce33200c6e42dc4
Headers show
Series [v2] ASoC: tas2770: Insert post reset delay | expand

Commit Message

Martin Povišer Feb. 4, 2022, 9:53 a.m. UTC 
Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
---
In previous submission of this patch some people got their copy
encrypted. That was by accident, pardon that. I have changed my email
provider since.

v1: https://lore.kernel.org/alsa-devel/20220201234612.74401-1-povik+lin@protonmail.com/

 sound/soc/codecs/tas2770.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index b52c0861edc8..b397a2122dd4 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -38,10 +38,12 @@  static void tas2770_reset(struct tas2770_priv *tas2770)
 		gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
 		msleep(20);
 		gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
+		usleep_range(1000, 2000);
 	}
 
 	snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
 		TAS2770_RST);
+	usleep_range(1000, 2000);
 }
 
 static int tas2770_set_bias_level(struct snd_soc_component *component,
@@ -110,6 +112,7 @@  static int tas2770_codec_resume(struct snd_soc_component *component)
 
 	if (tas2770->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+		usleep_range(1000, 2000);
 	} else {
 		ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
 						    TAS2770_PWR_CTRL_MASK,
@@ -529,8 +532,10 @@  static int tas2770_codec_probe(struct snd_soc_component *component)
 
 	tas2770->component = component;
 
-	if (tas2770->sdz_gpio)
+	if (tas2770->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+		usleep_range(1000, 2000);
+	}
 
 	tas2770_reset(tas2770);