| Message ID | 20220202193339.22441-2-biju.das.jz@bp.renesas.com |
|---|---|
| State | Accepted |
| Commit | 726fd781195dc99cdcb60b2678694bfa5ccd1825 |
| Headers | show |
| Series | [v2,1/4] arm64: dts: renesas: rzg2l-smarc: Add common dtsi file | expand |
Hi All, I would like to drop this patch, as I did not taken care RZ/V2L. I will send Clock changes of V2L along with RZ/G2LC. Regards, Biju > Subject: [PATCH v2 1/4] arm64: dts: renesas: rzg2l-smarc: Add common dtsi > file > > RZ/G2L and RZ/G2LC SoC use the same carrier board, but the SoM is > different. > > Different pin mapping is possible on SoM. For eg:- RZ/G2L SMARC EVK uses > SCIF2, whereas RZ/G2LC uses SCIF1 for the serial interface available on > PMOD1. > > This patch adds support for handling the pin mapping differences by moving > definitions common to RZ/G2L and RZ/G2LC to a common dtsi file. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > v1->v2: > * Added Rb tag from Geert. > * Rebased to latest renesas-devel branch > --- > .../boot/dts/renesas/r9a07g044c2-smarc.dts | 9 +- > .../boot/dts/renesas/r9a07g044l2-smarc.dts | 1 + > .../boot/dts/renesas/rz-smarc-common.dtsi | 207 ++++++++++++++++++ > arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 193 ---------------- > 4 files changed, 209 insertions(+), 201 deletions(-) create mode 100644 > arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi > > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts > b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts > index 8d671111d973..af84fd6c8a81 100644 > --- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts > +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts > @@ -9,12 +9,11 @@ > #include "r9a07g044c2.dtsi" > #include "rzg2lc-smarc-som.dtsi" > #include "rzg2lc-smarc-pinfunction.dtsi" > -#include "rzg2l-smarc.dtsi" > +#include "rz-smarc-common.dtsi" > > / { > model = "Renesas SMARC EVK based on r9a07g044c2"; > compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", > "renesas,r9a07g044"; > - > }; > > &canfd { > @@ -75,12 +74,6 @@ > status = "disabled"; > }; > > -&scif2 { > - /delete-property/ pinctrl-0; > - /delete-property/ pinctrl-names; > - status = "disabled"; > -}; > - > &spi1 { > /delete-property/ pinctrl-0; > /delete-property/ pinctrl-names; > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts > b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts > index 886d38886d05..bc2af6c92ccd 100644 > --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts > @@ -9,6 +9,7 @@ > #include "r9a07g044l2.dtsi" > #include "rzg2l-smarc-som.dtsi" > #include "rzg2l-smarc-pinfunction.dtsi" > +#include "rz-smarc-common.dtsi" > #include "rzg2l-smarc.dtsi" > > / { > diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi > b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi > new file mode 100644 > index 000000000000..dd2a19ae0bfd > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi > @@ -0,0 +1,207 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Device Tree Source for the RZ/{G2L, G2LC, V2L} SMARC EVK common > +parts > + * > + * Copyright (C) 2022 Renesas Electronics Corp. > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> > + > +/* > + * SSI-WM8978 > + * > + * This command is required when Playback/Capture > + * > + * amixer cset name='Left Input Mixer L2 Switch' on > + * amixer cset name='Right Input Mixer R2 Switch' on > + * amixer cset name='Headphone Playback Volume' 100 > + * amixer cset name='PCM Volume' 100% > + * amixer cset name='Input PGA Volume' 25 > + * > + */ > + > +/ { > + aliases { > + serial0 = &scif0; > + i2c0 = &i2c0; > + i2c1 = &i2c1; > + i2c3 = &i2c3; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + audio_mclock: audio_mclock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <11289600>; > + }; > + > + snd_rzg2l: sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <&cpu_dai>; > + simple-audio-card,frame-master = <&cpu_dai>; > + simple-audio-card,mclk-fs = <256>; > + > + simple-audio-card,widgets = "Microphone", "Microphone Jack"; > + simple-audio-card,routing = > + "L2", "Mic Bias", > + "R2", "Mic Bias", > + "Mic Bias", "Microphone Jack"; > + > + cpu_dai: simple-audio-card,cpu { > + sound-dai = <&ssi0>; > + }; > + > + codec_dai: simple-audio-card,codec { > + clocks = <&audio_mclock>; > + sound-dai = <&wm8978>; > + }; > + }; > + > + usb0_vbus_otg: regulator-usb0-vbus-otg { > + compatible = "regulator-fixed"; > + > + regulator-name = "USB0_VBUS_OTG"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vccq_sdhi1: regulator-vccq-sdhi1 { > + compatible = "regulator-gpio"; > + regulator-name = "SDHI1 VccQ"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; > + gpios-states = <1>; > + states = <3300000 1>, <1800000 0>; > + }; > +}; > + > +&audio_clk1{ > + clock-frequency = <11289600>; > +}; > + > +&audio_clk2{ > + clock-frequency = <12288000>; > +}; > + > +&canfd { > + pinctrl-0 = <&can0_pins &can1_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + > + channel0 { > + status = "okay"; > + }; > + > + channel1 { > + status = "okay"; > + }; > +}; > + > +&ehci0 { > + dr_mode = "otg"; > + status = "okay"; > +}; > + > +&ehci1 { > + status = "okay"; > +}; > + > +&hsusb { > + dr_mode = "otg"; > + status = "okay"; > +}; > + > +&i2c0 { > + pinctrl-0 = <&i2c0_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&i2c1 { > + pinctrl-0 = <&i2c1_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&i2c3 { > + pinctrl-0 = <&i2c3_pins>; > + pinctrl-names = "default"; > + clock-frequency = <400000>; > + > + status = "okay"; > + > + wm8978: codec@1a { > + compatible = "wlf,wm8978"; > + #sound-dai-cells = <0>; > + reg = <0x1a>; > + }; > +}; > + > +&ohci0 { > + dr_mode = "otg"; > + status = "okay"; > +}; > + > +&ohci1 { > + status = "okay"; > +}; > + > +&phyrst { > + status = "okay"; > +}; > + > +&scif0 { > + pinctrl-0 = <&scif0_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&sdhi1 { > + pinctrl-0 = <&sdhi1_pins>; > + pinctrl-1 = <&sdhi1_pins_uhs>; > + pinctrl-names = "default", "state_uhs"; > + > + vmmc-supply = <®_3p3v>; > + vqmmc-supply = <&vccq_sdhi1>; > + bus-width = <4>; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + status = "okay"; > +}; > + > +&spi1 { > + pinctrl-0 = <&spi1_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&ssi0 { > + pinctrl-0 = <&ssi0_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&usb2_phy0 { > + pinctrl-0 = <&usb0_pins>; > + pinctrl-names = "default"; > + > + vbus-supply = <&usb0_vbus_otg>; > + status = "okay"; > +}; > + > +&usb2_phy1 { > + pinctrl-0 = <&usb1_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi > b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi > index 78034f36156d..33ddfd18bd56 100644 > --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi > +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi > @@ -8,164 +8,13 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> > > -/* > - * SSI-WM8978 > - * > - * This command is required when Playback/Capture > - * > - * amixer cset name='Left Input Mixer L2 Switch' on > - * amixer cset name='Right Input Mixer R2 Switch' on > - * amixer cset name='Headphone Playback Volume' 100 > - * amixer cset name='PCM Volume' 100% > - * amixer cset name='Input PGA Volume' 25 > - * > - */ > - > /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) > */ > #define PMOD1_SER0 1 > > / { > aliases { > - serial0 = &scif0; > serial1 = &scif2; > - i2c0 = &i2c0; > - i2c1 = &i2c1; > - i2c3 = &i2c3; > - }; > - > - chosen { > - stdout-path = "serial0:115200n8"; > - }; > - > - audio_mclock: audio_mclock { > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <11289600>; > - }; > - > - snd_rzg2l: sound { > - compatible = "simple-audio-card"; > - simple-audio-card,format = "i2s"; > - simple-audio-card,bitclock-master = <&cpu_dai>; > - simple-audio-card,frame-master = <&cpu_dai>; > - simple-audio-card,mclk-fs = <256>; > - > - simple-audio-card,widgets = "Microphone", "Microphone Jack"; > - simple-audio-card,routing = > - "L2", "Mic Bias", > - "R2", "Mic Bias", > - "Mic Bias", "Microphone Jack"; > - > - cpu_dai: simple-audio-card,cpu { > - sound-dai = <&ssi0>; > - }; > - > - codec_dai: simple-audio-card,codec { > - clocks = <&audio_mclock>; > - sound-dai = <&wm8978>; > - }; > - }; > - > - usb0_vbus_otg: regulator-usb0-vbus-otg { > - compatible = "regulator-fixed"; > - > - regulator-name = "USB0_VBUS_OTG"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - }; > - > - vccq_sdhi1: regulator-vccq-sdhi1 { > - compatible = "regulator-gpio"; > - regulator-name = "SDHI1 VccQ"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; > - gpios-states = <1>; > - states = <3300000 1>, <1800000 0>; > - }; > -}; > - > -&audio_clk1{ > - clock-frequency = <11289600>; > -}; > - > -&audio_clk2{ > - clock-frequency = <12288000>; > -}; > - > -&canfd { > - pinctrl-0 = <&can0_pins &can1_pins>; > - pinctrl-names = "default"; > - status = "okay"; > - > - channel0 { > - status = "okay"; > }; > - > - channel1 { > - status = "okay"; > - }; > -}; > - > -&ehci0 { > - dr_mode = "otg"; > - status = "okay"; > -}; > - > -&ehci1 { > - status = "okay"; > -}; > - > -&hsusb { > - dr_mode = "otg"; > - status = "okay"; > -}; > - > -&i2c0 { > - pinctrl-0 = <&i2c0_pins>; > - pinctrl-names = "default"; > - > - status = "okay"; > -}; > - > -&i2c1 { > - pinctrl-0 = <&i2c1_pins>; > - pinctrl-names = "default"; > - > - status = "okay"; > -}; > - > -&i2c3 { > - pinctrl-0 = <&i2c3_pins>; > - pinctrl-names = "default"; > - clock-frequency = <400000>; > - > - status = "okay"; > - > - wm8978: codec@1a { > - compatible = "wlf,wm8978"; > - #sound-dai-cells = <0>; > - reg = <0x1a>; > - }; > -}; > - > -&ohci0 { > - dr_mode = "otg"; > - status = "okay"; > -}; > - > -&ohci1 { > - status = "okay"; > -}; > - > -&phyrst { > - status = "okay"; > -}; > - > -&scif0 { > - pinctrl-0 = <&scif0_pins>; > - pinctrl-names = "default"; > - status = "okay"; > }; > > /* > @@ -184,45 +33,3 @@ > status = "okay"; > }; > #endif > - > -&sdhi1 { > - pinctrl-0 = <&sdhi1_pins>; > - pinctrl-1 = <&sdhi1_pins_uhs>; > - pinctrl-names = "default", "state_uhs"; > - > - vmmc-supply = <®_3p3v>; > - vqmmc-supply = <&vccq_sdhi1>; > - bus-width = <4>; > - sd-uhs-sdr50; > - sd-uhs-sdr104; > - status = "okay"; > -}; > - > -&spi1 { > - pinctrl-0 = <&spi1_pins>; > - pinctrl-names = "default"; > - > - status = "okay"; > -}; > - > -&ssi0 { > - pinctrl-0 = <&ssi0_pins>; > - pinctrl-names = "default"; > - > - status = "okay"; > -}; > - > -&usb2_phy0 { > - pinctrl-0 = <&usb0_pins>; > - pinctrl-names = "default"; > - > - vbus-supply = <&usb0_vbus_otg>; > - status = "okay"; > -}; > - > -&usb2_phy1 { > - pinctrl-0 = <&usb1_pins>; > - pinctrl-names = "default"; > - > - status = "okay"; > -}; > -- > 2.17.1
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts index 8d671111d973..af84fd6c8a81 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts @@ -9,12 +9,11 @@ #include "r9a07g044c2.dtsi" #include "rzg2lc-smarc-som.dtsi" #include "rzg2lc-smarc-pinfunction.dtsi" -#include "rzg2l-smarc.dtsi" +#include "rz-smarc-common.dtsi" / { model = "Renesas SMARC EVK based on r9a07g044c2"; compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044"; - }; &canfd { @@ -75,12 +74,6 @@ status = "disabled"; }; -&scif2 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - &spi1 { /delete-property/ pinctrl-0; /delete-property/ pinctrl-names; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts index 886d38886d05..bc2af6c92ccd 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts @@ -9,6 +9,7 @@ #include "r9a07g044l2.dtsi" #include "rzg2l-smarc-som.dtsi" #include "rzg2l-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" #include "rzg2l-smarc.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi new file mode 100644 index 000000000000..dd2a19ae0bfd --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L, G2LC, V2L} SMARC EVK common parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * SSI-WM8978 + * + * This command is required when Playback/Capture + * + * amixer cset name='Left Input Mixer L2 Switch' on + * amixer cset name='Right Input Mixer R2 Switch' on + * amixer cset name='Headphone Playback Volume' 100 + * amixer cset name='PCM Volume' 100% + * amixer cset name='Input PGA Volume' 25 + * + */ + +/ { + aliases { + serial0 = &scif0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c3 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + audio_mclock: audio_mclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + snd_rzg2l: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "L2", "Mic Bias", + "R2", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi0>; + }; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_mclock>; + sound-dai = <&wm8978>; + }; + }; + + usb0_vbus_otg: regulator-usb0-vbus-otg { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS_OTG"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&audio_clk1{ + clock-frequency = <11289600>; +}; + +&audio_clk2{ + clock-frequency = <12288000>; +}; + +&canfd { + pinctrl-0 = <&can0_pins &can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 78034f36156d..33ddfd18bd56 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -8,164 +8,13 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ #define PMOD1_SER0 1 / { aliases { - serial0 = &scif0; serial1 = &scif2; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c3 = &i2c3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - audio_mclock: audio_mclock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - sound-dai = <&ssi0>; - }; - - codec_dai: simple-audio-card,codec { - clocks = <&audio_mclock>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; -}; - -&audio_clk1{ - clock-frequency = <11289600>; -}; - -&audio_clk2{ - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; }; /* @@ -184,45 +33,3 @@ status = "okay"; }; #endif - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -};