diff mbox series

[v2,3/3] iio: accel: st_accel: Add support for Silan SC7A20

Message ID 20220202235049.8051-4-samuel@sholland.org
State Accepted
Commit c7a43b089826b17e46419d93c00c0d2f4b26735f
Headers show
Series None | expand

Commit Message

Samuel Holland Feb. 2, 2022, 11:50 p.m. UTC
This chip appears to be register-compatible with the LIS2DH. The new
description is a copy of the LIS2DH's description with a different WAI
value.

Datasheet: http://linux-chenxing.org/silan/SC7A20-SilanMicroelectronics.pdf
Datasheet: http://www.siitek.com.cn/Upfiles/down/SC7A20说明书_0.92(智能穿戴).pdf
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v2:
 - Add a comment about the WAI value
 - Update commit messages

 drivers/iio/accel/st_accel.h      |  2 +
 drivers/iio/accel/st_accel_core.c | 83 +++++++++++++++++++++++++++++++
 drivers/iio/accel/st_accel_i2c.c  |  5 ++
 3 files changed, 90 insertions(+)

Comments

Linus Walleij Feb. 3, 2022, 4:36 p.m. UTC | #1
On Thu, Feb 3, 2022 at 12:50 AM Samuel Holland <samuel@sholland.org> wrote:

> This chip appears to be register-compatible with the LIS2DH. The new
> description is a copy of the LIS2DH's description with a different WAI
> value.
>
> Datasheet: http://linux-chenxing.org/silan/SC7A20-SilanMicroelectronics.pdf
> Datasheet: http://www.siitek.com.cn/Upfiles/down/SC7A20说明书_0.92(智能穿戴).pdf
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>
> Changes in v2:
>  - Add a comment about the WAI value
>  - Update commit messages

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 8750dea56fcb..00e056c21bfc 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -36,6 +36,7 @@  enum st_accel_type {
 	LIS3DHH,
 	LIS2DE12,
 	LIS2HH12,
+	SC7A20,
 	ST_ACCEL_MAX,
 };
 
@@ -61,6 +62,7 @@  enum st_accel_type {
 #define LIS3DE_ACCEL_DEV_NAME		"lis3de"
 #define LIS2DE12_ACCEL_DEV_NAME		"lis2de12"
 #define LIS2HH12_ACCEL_DEV_NAME		"lis2hh12"
+#define SC7A20_ACCEL_DEV_NAME		"sc7a20"
 
 #ifdef CONFIG_IIO_BUFFER
 int st_accel_allocate_ring(struct iio_dev *indio_dev);
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 31ea19d0ba71..2ada8d6fb503 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -1087,6 +1087,89 @@  static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
+	{
+		/*
+		 * Not an ST part. Register-compatible with the LIS2DH, even
+		 * though the WAI value is different.
+		 */
+		.wai = 0x11,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = SC7A20_ACCEL_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0xf0,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(4000),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(12000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
 };
 
 /* Default accel DRDY is available on INT1 pin */
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index c0ce78eebad9..7f5888570e87 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -107,6 +107,10 @@  static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lis2hh12",
 		.data = LIS2HH12_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "silan,sc7a20",
+		.data = SC7A20_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -142,6 +146,7 @@  static const struct i2c_device_id st_accel_id_table[] = {
 	{ LIS3DE_ACCEL_DEV_NAME },
 	{ LIS2DE12_ACCEL_DEV_NAME },
 	{ LIS2HH12_ACCEL_DEV_NAME },
+	{ SC7A20_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);