diff mbox

ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable

Message ID 1322584345-19193-1-git-send-email-dave.martin@linaro.org
State Superseded
Headers show

Commit Message

Dave Martin Nov. 29, 2011, 4:32 p.m. UTC
Making CACHE_L2X0 depends on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines.  To enable this,
a new HAVE_L2X0_L2CC config option is introduced to allow machines
to indicate that they have such a cache controller independently of
each other.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
---
 arch/arm/Kconfig               |    8 ++++++++
 arch/arm/mach-exynos/Kconfig   |    1 +
 arch/arm/mach-omap2/Kconfig    |    1 +
 arch/arm/mach-realview/Kconfig |    5 +++++
 arch/arm/mach-vexpress/Kconfig |    1 +
 arch/arm/mm/Kconfig            |   13 ++++++++-----
 arch/arm/plat-mxc/Kconfig      |    1 +
 7 files changed, 25 insertions(+), 5 deletions(-)

Comments

Rob Herring Nov. 29, 2011, 7:25 p.m. UTC | #1
On 11/29/2011 10:32 AM, Dave Martin wrote:
> Making CACHE_L2X0 depends on (huge list of MACH_ and ARCH_ configs)
> is bothersome to maintain and likely to lead to merge conflicts.
> 
> This patch moves the knowledge of which platforms have a L2x0 or
> PL310 cache controller to the individual machines.  To enable this,
> a new HAVE_L2X0_L2CC config option is introduced to allow machines
> to indicate that they have such a cache controller independently of
> each other.
> 
> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> ---
>  arch/arm/Kconfig               |    8 ++++++++
>  arch/arm/mach-exynos/Kconfig   |    1 +
>  arch/arm/mach-omap2/Kconfig    |    1 +
>  arch/arm/mach-realview/Kconfig |    5 +++++
>  arch/arm/mach-vexpress/Kconfig |    1 +
>  arch/arm/mm/Kconfig            |   13 ++++++++-----
>  arch/arm/plat-mxc/Kconfig      |    1 +
>  7 files changed, 25 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 44789ef..4068fe5 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -339,6 +339,7 @@ config ARCH_HIGHBANK
>  	select ARCH_WANT_OPTIONAL_GPIOLIB
>  	select ARM_AMBA
>  	select ARM_GIC
> +	select HAVE_L2X0_L2CC
>  	select ARM_TIMER_SP804
>  	select CLKDEV_LOOKUP
>  	select CPU_V7

These entries are sorted per rmk's review, so please keep it that way.


> @@ -359,6 +360,7 @@ config ARCH_CLPS711X
>  config ARCH_CNS3XXX
>  	bool "Cavium Networks CNS3XXX family"
>  	select CPU_V6K
> +	select HAVE_L2X0_L2CC
>  	select GENERIC_CLOCKEVENTS
>  	select ARM_GIC
>  	select MIGHT_HAVE_PCI

But as you can see, that's rarely the case...

> @@ -377,6 +379,7 @@ config ARCH_GEMINI
>  config ARCH_PRIMA2
>  	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
>  	select CPU_V7
> +	select HAVE_L2X0_L2CC
>  	select NO_IOPORT
>  	select GENERIC_CLOCKEVENTS
>  	select CLKDEV_LOOKUP
> @@ -627,6 +630,7 @@ config ARCH_W90X900
>  
>  config ARCH_TEGRA
>  	bool "NVIDIA Tegra"
> +	select HAVE_L2X0_L2CC
>  	select CLKDEV_LOOKUP
>  	select CLKSRC_MMIO
>  	select GENERIC_CLOCKEVENTS
> @@ -699,6 +703,7 @@ config ARCH_MSM
>  
>  config ARCH_SHMOBILE
>  	bool "Renesas SH-Mobile / R-Mobile"
> +	select HAVE_L2X0_L2CC
>  	select HAVE_CLK
>  	select CLKDEV_LOOKUP
>  	select HAVE_MACH_CLKDEV
> @@ -900,6 +905,7 @@ config ARCH_U8500
>  	bool "ST-Ericsson U8500 Series"
>  	select CPU_V7
>  	select ARM_AMBA
> +	select HAVE_L2X0_L2CC
>  	select GENERIC_CLOCKEVENTS
>  	select CLKDEV_LOOKUP
>  	select ARCH_REQUIRE_GPIOLIB
> @@ -912,6 +918,7 @@ config ARCH_NOMADIK
>  	select ARM_AMBA
>  	select ARM_VIC
>  	select CPU_ARM926T
> +	select HAVE_L2X0_L2CC
>  	select CLKDEV_LOOKUP
>  	select GENERIC_CLOCKEVENTS
>  	select ARCH_REQUIRE_GPIOLIB
> @@ -968,6 +975,7 @@ config ARCH_VT8500
>  config ARCH_ZYNQ
>  	bool "Xilinx Zynq ARM Cortex A9 Platform"
>  	select CPU_V7
> +	select HAVE_L2X0_L2CC
>  	select GENERIC_CLOCKEVENTS
>  	select CLKDEV_LOOKUP
>  	select ARM_GIC
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 724ec0f..b3eb318 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -17,6 +17,7 @@ choice
>  
>  config ARCH_EXYNOS4
>  	bool "SAMSUNG EXYNOS4"
> +	select HAVE_L2X0_L2CC
>  	help
>  	  Samsung EXYNOS4 SoCs based systems
>  
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 5034147..f4e7e6a 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -44,6 +44,7 @@ config ARCH_OMAP4
>  	select CPU_V7
>  	select ARM_GIC
>  	select LOCAL_TIMERS if SMP
> +	select HAVE_L2X0_L2CC
>  	select PL310_ERRATA_588369
>  	select PL310_ERRATA_727915
>  	select ARM_ERRATA_720789
> diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
> index dba6d0c..3dfd6b8 100644
> --- a/arch/arm/mach-realview/Kconfig
> +++ b/arch/arm/mach-realview/Kconfig
> @@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
>  	bool "Support Multicore Cortex-A9 Tile"
>  	depends on MACH_REALVIEW_EB
>  	select CPU_V7
> +	select HAVE_L2X0_L2CC
>  	help
>  	  Enable support for the Cortex-A9MPCore tile fitted to the
>  	  Realview(R) Emulation Baseboard platform.
> @@ -20,6 +21,7 @@ config REALVIEW_EB_ARM11MP
>  	bool "Support ARM11MPCore Tile"
>  	depends on MACH_REALVIEW_EB
>  	select CPU_V6K
> +	select HAVE_L2X0_L2CC
>  	select ARCH_HAS_BARRIERS if SMP
>  	help
>  	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
> @@ -38,6 +40,7 @@ config MACH_REALVIEW_PB11MP
>  	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
>  	select CPU_V6K
>  	select ARM_GIC
> +	select HAVE_L2X0_L2CC
>  	select HAVE_PATA_PLATFORM
>  	select ARCH_HAS_BARRIERS if SMP
>  	help
> @@ -50,6 +53,7 @@ config MACH_REALVIEW_PB1176
>  	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
>  	select CPU_V6
>  	select ARM_GIC
> +	select HAVE_L2X0_L2CC
>  	select HAVE_TCM
>  	help
>  	  Include support for the ARM(R) RealView(R) Platform Baseboard for
> @@ -77,6 +81,7 @@ config MACH_REALVIEW_PBA8
>  config MACH_REALVIEW_PBX
>  	bool "Support RealView(R) Platform Baseboard Explore"
>  	select ARM_GIC
> +	select HAVE_L2X0_L2CC
>  	select HAVE_PATA_PLATFORM
>  	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
>  	select ZONE_DMA if SPARSEMEM
> diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> index 9311484..78d4f28 100644
> --- a/arch/arm/mach-vexpress/Kconfig
> +++ b/arch/arm/mach-vexpress/Kconfig
> @@ -5,6 +5,7 @@ config ARCH_VEXPRESS_CA9X4
>  	bool "Versatile Express Cortex-A9x4 tile"
>  	select CPU_V7
>  	select ARM_GIC
> +	select HAVE_L2X0_L2CC
>  	select ARM_ERRATA_720789
>  	select ARM_ERRATA_751472
>  	select ARM_ERRATA_753970
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 67f75a0..bb743df 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -816,13 +816,16 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
>  	  Say Y here to use the Feroceon L2 cache in writethrough mode.
>  	  Unless you specifically require this, say N for writeback mode.
>  
> +config HAVE_L2X0_L2CC
> +	bool
> +	default n

n is the default already.

> +	help
> +	  This option should be selected by machines which have a L2x0
> +	  or PL310 cache controller.
> +
>  config CACHE_L2X0
>  	bool "Enable the L2x0 outer cache controller"
> -	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
> -		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
> -		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
> -		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
> -		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
> +	depends on HAVE_L2X0_L2CC

For platforms that run in non-secure mode, this shouldn't really be a
user selectable option. Perhaps those should just select CACHE_L2X0
directly. I'm not sure which one's those are other than Highbank and OMAP4.

Rob
Russell King - ARM Linux Nov. 29, 2011, 10:18 p.m. UTC | #2
On Tue, Nov 29, 2011 at 01:25:55PM -0600, Rob Herring wrote:
> But as you can see, that's rarely the case...

That's because I don't always catch them anymore.

It's something that does need sorting out though, because it makes
conflict resolution harder to just have people appending to the end.
With a sorting order in place, it helps spread the additions and so
reduce the conflicts.
Dave Martin Dec. 6, 2011, 4:26 p.m. UTC | #3
On Tue, Nov 29, 2011 at 01:25:55PM -0600, Rob Herring wrote:
> On 11/29/2011 10:32 AM, Dave Martin wrote:
> > Making CACHE_L2X0 depends on (huge list of MACH_ and ARCH_ configs)
> > is bothersome to maintain and likely to lead to merge conflicts.
> > 
> > This patch moves the knowledge of which platforms have a L2x0 or
> > PL310 cache controller to the individual machines.  To enable this,
> > a new HAVE_L2X0_L2CC config option is introduced to allow machines
> > to indicate that they have such a cache controller independently of
> > each other.
> > 
> > Signed-off-by: Dave Martin <dave.martin@linaro.org>
> > ---
> >  arch/arm/Kconfig               |    8 ++++++++
> >  arch/arm/mach-exynos/Kconfig   |    1 +
> >  arch/arm/mach-omap2/Kconfig    |    1 +
> >  arch/arm/mach-realview/Kconfig |    5 +++++
> >  arch/arm/mach-vexpress/Kconfig |    1 +
> >  arch/arm/mm/Kconfig            |   13 ++++++++-----
> >  arch/arm/plat-mxc/Kconfig      |    1 +
> >  7 files changed, 25 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 44789ef..4068fe5 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -339,6 +339,7 @@ config ARCH_HIGHBANK
> >  	select ARCH_WANT_OPTIONAL_GPIOLIB
> >  	select ARM_AMBA
> >  	select ARM_GIC
> > +	select HAVE_L2X0_L2CC
> >  	select ARM_TIMER_SP804
> >  	select CLKDEV_LOOKUP
> >  	select CPU_V7
> 
> These entries are sorted per rmk's review, so please keep it that way.

Can you explain what order they should be in?  Alphabetical?

> 
> > @@ -359,6 +360,7 @@ config ARCH_CLPS711X
> >  config ARCH_CNS3XXX
> >  	bool "Cavium Networks CNS3XXX family"
> >  	select CPU_V6K
> > +	select HAVE_L2X0_L2CC
> >  	select GENERIC_CLOCKEVENTS
> >  	select ARM_GIC
> >  	select MIGHT_HAVE_PCI
> 
> But as you can see, that's rarely the case...

Do you mean "things are not always in alphabetical order?"

Apologies if I'm being obtuse -- your comments are rather terse for me.

[...]

> > +config HAVE_L2X0_L2CC
> > +	bool
> > +	default n
> 
> n is the default already.

Good point -- I'll kill that.

> > +	help
> > +	  This option should be selected by machines which have a L2x0
> > +	  or PL310 cache controller.
> > +
> >  config CACHE_L2X0
> >  	bool "Enable the L2x0 outer cache controller"
> > -	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
> > -		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
> > -		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
> > -		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
> > -		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
> > +	depends on HAVE_L2X0_L2CC
> 
> For platforms that run in non-secure mode, this shouldn't really be a
> user selectable option. Perhaps those should just select CACHE_L2X0
> directly. I'm not sure which one's those are other than Highbank and OMAP4.

The idea here is to make the option user-selectable on platforms where it
makes sense (and only those platforms).

So yes, I think that platforms which require this option _should_ select
it directly, rather than it being reverse-selected from arch/arm/mm/Kconfig.
This puts the knowledge in the logical place.  Does this apply to OMAP3?
I think we're always running in the Normal World there too.

Cheers
---Dave
Rob Herring Dec. 6, 2011, 4:51 p.m. UTC | #4
On 12/06/2011 10:26 AM, Dave Martin wrote:
> On Tue, Nov 29, 2011 at 01:25:55PM -0600, Rob Herring wrote:
>> On 11/29/2011 10:32 AM, Dave Martin wrote:
>>> Making CACHE_L2X0 depends on (huge list of MACH_ and ARCH_ configs)
>>> is bothersome to maintain and likely to lead to merge conflicts.
>>>
>>> This patch moves the knowledge of which platforms have a L2x0 or
>>> PL310 cache controller to the individual machines.  To enable this,
>>> a new HAVE_L2X0_L2CC config option is introduced to allow machines
>>> to indicate that they have such a cache controller independently of
>>> each other.
>>>
>>> Signed-off-by: Dave Martin <dave.martin@linaro.org>
>>> ---
>>>  arch/arm/Kconfig               |    8 ++++++++
>>>  arch/arm/mach-exynos/Kconfig   |    1 +
>>>  arch/arm/mach-omap2/Kconfig    |    1 +
>>>  arch/arm/mach-realview/Kconfig |    5 +++++
>>>  arch/arm/mach-vexpress/Kconfig |    1 +
>>>  arch/arm/mm/Kconfig            |   13 ++++++++-----
>>>  arch/arm/plat-mxc/Kconfig      |    1 +
>>>  7 files changed, 25 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>>> index 44789ef..4068fe5 100644
>>> --- a/arch/arm/Kconfig
>>> +++ b/arch/arm/Kconfig
>>> @@ -339,6 +339,7 @@ config ARCH_HIGHBANK
>>>  	select ARCH_WANT_OPTIONAL_GPIOLIB
>>>  	select ARM_AMBA
>>>  	select ARM_GIC
>>> +	select HAVE_L2X0_L2CC
>>>  	select ARM_TIMER_SP804
>>>  	select CLKDEV_LOOKUP
>>>  	select CPU_V7
>>
>> These entries are sorted per rmk's review, so please keep it that way.
> 
> Can you explain what order they should be in?  Alphabetical?

Yes, alphabetical.

> 
>>
>>> @@ -359,6 +360,7 @@ config ARCH_CLPS711X
>>>  config ARCH_CNS3XXX
>>>  	bool "Cavium Networks CNS3XXX family"
>>>  	select CPU_V6K
>>> +	select HAVE_L2X0_L2CC
>>>  	select GENERIC_CLOCKEVENTS
>>>  	select ARM_GIC
>>>  	select MIGHT_HAVE_PCI
>>
>> But as you can see, that's rarely the case...
> 
> Do you mean "things are not always in alphabetical order?"
> 
> Apologies if I'm being obtuse -- your comments are rather terse for me.

Yes.

> 
> [...]
> 
>>> +config HAVE_L2X0_L2CC
>>> +	bool
>>> +	default n
>>
>> n is the default already.
> 
> Good point -- I'll kill that.
> 
>>> +	help
>>> +	  This option should be selected by machines which have a L2x0
>>> +	  or PL310 cache controller.
>>> +
>>>  config CACHE_L2X0
>>>  	bool "Enable the L2x0 outer cache controller"
>>> -	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
>>> -		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
>>> -		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
>>> -		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
>>> -		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
>>> +	depends on HAVE_L2X0_L2CC
>>
>> For platforms that run in non-secure mode, this shouldn't really be a
>> user selectable option. Perhaps those should just select CACHE_L2X0
>> directly. I'm not sure which one's those are other than Highbank and OMAP4.
> 
> The idea here is to make the option user-selectable on platforms where it
> makes sense (and only those platforms).
> 
> So yes, I think that platforms which require this option _should_ select
> it directly, rather than it being reverse-selected from arch/arm/mm/Kconfig.
> This puts the knowledge in the logical place.  Does this apply to OMAP3?
> I think we're always running in the Normal World there too.

No, as OMAP3 has the integrated L2 of the Cortex-A8.

Rob
Dave Martin Dec. 6, 2011, 5:20 p.m. UTC | #5
On Tue, Dec 06, 2011 at 10:51:28AM -0600, Rob Herring wrote:
> On 12/06/2011 10:26 AM, Dave Martin wrote:
> > On Tue, Nov 29, 2011 at 01:25:55PM -0600, Rob Herring wrote:
> >> On 11/29/2011 10:32 AM, Dave Martin wrote:
> >>> Making CACHE_L2X0 depends on (huge list of MACH_ and ARCH_ configs)
> >>> is bothersome to maintain and likely to lead to merge conflicts.
> >>>
> >>> This patch moves the knowledge of which platforms have a L2x0 or
> >>> PL310 cache controller to the individual machines.  To enable this,
> >>> a new HAVE_L2X0_L2CC config option is introduced to allow machines
> >>> to indicate that they have such a cache controller independently of
> >>> each other.
> >>>
> >>> Signed-off-by: Dave Martin <dave.martin@linaro.org>
> >>> ---
> >>>  arch/arm/Kconfig               |    8 ++++++++
> >>>  arch/arm/mach-exynos/Kconfig   |    1 +
> >>>  arch/arm/mach-omap2/Kconfig    |    1 +
> >>>  arch/arm/mach-realview/Kconfig |    5 +++++
> >>>  arch/arm/mach-vexpress/Kconfig |    1 +
> >>>  arch/arm/mm/Kconfig            |   13 ++++++++-----
> >>>  arch/arm/plat-mxc/Kconfig      |    1 +
> >>>  7 files changed, 25 insertions(+), 5 deletions(-)
> >>>
> >>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> >>> index 44789ef..4068fe5 100644
> >>> --- a/arch/arm/Kconfig
> >>> +++ b/arch/arm/Kconfig
> >>> @@ -339,6 +339,7 @@ config ARCH_HIGHBANK
> >>>  	select ARCH_WANT_OPTIONAL_GPIOLIB
> >>>  	select ARM_AMBA
> >>>  	select ARM_GIC
> >>> +	select HAVE_L2X0_L2CC
> >>>  	select ARM_TIMER_SP804
> >>>  	select CLKDEV_LOOKUP
> >>>  	select CPU_V7
> >>
> >> These entries are sorted per rmk's review, so please keep it that way.
> > 
> > Can you explain what order they should be in?  Alphabetical?
> 
> Yes, alphabetical.
> 
> > 
> >>
> >>> @@ -359,6 +360,7 @@ config ARCH_CLPS711X
> >>>  config ARCH_CNS3XXX
> >>>  	bool "Cavium Networks CNS3XXX family"
> >>>  	select CPU_V6K
> >>> +	select HAVE_L2X0_L2CC
> >>>  	select GENERIC_CLOCKEVENTS
> >>>  	select ARM_GIC
> >>>  	select MIGHT_HAVE_PCI
> >>
> >> But as you can see, that's rarely the case...
> > 
> > Do you mean "things are not always in alphabetical order?"
> > 
> > Apologies if I'm being obtuse -- your comments are rather terse for me.
> 
> Yes.
> 
> > 
> > [...]
> > 
> >>> +config HAVE_L2X0_L2CC
> >>> +	bool
> >>> +	default n
> >>
> >> n is the default already.
> > 
> > Good point -- I'll kill that.
> > 
> >>> +	help
> >>> +	  This option should be selected by machines which have a L2x0
> >>> +	  or PL310 cache controller.
> >>> +
> >>>  config CACHE_L2X0
> >>>  	bool "Enable the L2x0 outer cache controller"
> >>> -	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
> >>> -		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
> >>> -		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
> >>> -		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
> >>> -		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
> >>> +	depends on HAVE_L2X0_L2CC
> >>
> >> For platforms that run in non-secure mode, this shouldn't really be a
> >> user selectable option. Perhaps those should just select CACHE_L2X0
> >> directly. I'm not sure which one's those are other than Highbank and OMAP4.
> > 
> > The idea here is to make the option user-selectable on platforms where it
> > makes sense (and only those platforms).
> > 
> > So yes, I think that platforms which require this option _should_ select
> > it directly, rather than it being reverse-selected from arch/arm/mm/Kconfig.
> > This puts the knowledge in the logical place.  Does this apply to OMAP3?
> > I think we're always running in the Normal World there too.
> 
> No, as OMAP3 has the integrated L2 of the Cortex-A8.

Yes, I realised that after I'd posted ... I'll tweak the series and repost.

Thanks for the feedback

---Dave
Dave Martin Dec. 12, 2011, 3:14 p.m. UTC | #6
On Tue, Nov 29, 2011 at 01:25:55PM -0600, Rob Herring wrote:
> On 11/29/2011 10:32 AM, Dave Martin wrote:
> > Making CACHE_L2X0 depends on (huge list of MACH_ and ARCH_ configs)
> > is bothersome to maintain and likely to lead to merge conflicts.
> > 
> > This patch moves the knowledge of which platforms have a L2x0 or
> > PL310 cache controller to the individual machines.  To enable this,
> > a new HAVE_L2X0_L2CC config option is introduced to allow machines
> > to indicate that they have such a cache controller independently of
> > each other.
> > 
> > Signed-off-by: Dave Martin <dave.martin@linaro.org>
> > ---
> >  arch/arm/Kconfig               |    8 ++++++++
> >  arch/arm/mach-exynos/Kconfig   |    1 +
> >  arch/arm/mach-omap2/Kconfig    |    1 +
> >  arch/arm/mach-realview/Kconfig |    5 +++++
> >  arch/arm/mach-vexpress/Kconfig |    1 +
> >  arch/arm/mm/Kconfig            |   13 ++++++++-----
> >  arch/arm/plat-mxc/Kconfig      |    1 +
> >  7 files changed, 25 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 44789ef..4068fe5 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -339,6 +339,7 @@ config ARCH_HIGHBANK
> >  	select ARCH_WANT_OPTIONAL_GPIOLIB
> >  	select ARM_AMBA
> >  	select ARM_GIC
> > +	select HAVE_L2X0_L2CC
> >  	select ARM_TIMER_SP804
> >  	select CLKDEV_LOOKUP
> >  	select CPU_V7
> 
> These entries are sorted per rmk's review, so please keep it that way.
> 
> 
> > @@ -359,6 +360,7 @@ config ARCH_CLPS711X
> >  config ARCH_CNS3XXX
> >  	bool "Cavium Networks CNS3XXX family"
> >  	select CPU_V6K
> > +	select HAVE_L2X0_L2CC
> >  	select GENERIC_CLOCKEVENTS
> >  	select ARM_GIC
> >  	select MIGHT_HAVE_PCI
> 
> But as you can see, that's rarely the case...
> 
> > @@ -377,6 +379,7 @@ config ARCH_GEMINI
> >  config ARCH_PRIMA2
> >  	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
> >  	select CPU_V7
> > +	select HAVE_L2X0_L2CC
> >  	select NO_IOPORT
> >  	select GENERIC_CLOCKEVENTS
> >  	select CLKDEV_LOOKUP
> > @@ -627,6 +630,7 @@ config ARCH_W90X900
> >  
> >  config ARCH_TEGRA
> >  	bool "NVIDIA Tegra"
> > +	select HAVE_L2X0_L2CC
> >  	select CLKDEV_LOOKUP
> >  	select CLKSRC_MMIO
> >  	select GENERIC_CLOCKEVENTS
> > @@ -699,6 +703,7 @@ config ARCH_MSM
> >  
> >  config ARCH_SHMOBILE
> >  	bool "Renesas SH-Mobile / R-Mobile"
> > +	select HAVE_L2X0_L2CC
> >  	select HAVE_CLK
> >  	select CLKDEV_LOOKUP
> >  	select HAVE_MACH_CLKDEV
> > @@ -900,6 +905,7 @@ config ARCH_U8500
> >  	bool "ST-Ericsson U8500 Series"
> >  	select CPU_V7
> >  	select ARM_AMBA
> > +	select HAVE_L2X0_L2CC
> >  	select GENERIC_CLOCKEVENTS
> >  	select CLKDEV_LOOKUP
> >  	select ARCH_REQUIRE_GPIOLIB
> > @@ -912,6 +918,7 @@ config ARCH_NOMADIK
> >  	select ARM_AMBA
> >  	select ARM_VIC
> >  	select CPU_ARM926T
> > +	select HAVE_L2X0_L2CC
> >  	select CLKDEV_LOOKUP
> >  	select GENERIC_CLOCKEVENTS
> >  	select ARCH_REQUIRE_GPIOLIB
> > @@ -968,6 +975,7 @@ config ARCH_VT8500
> >  config ARCH_ZYNQ
> >  	bool "Xilinx Zynq ARM Cortex A9 Platform"
> >  	select CPU_V7
> > +	select HAVE_L2X0_L2CC
> >  	select GENERIC_CLOCKEVENTS
> >  	select CLKDEV_LOOKUP
> >  	select ARM_GIC
> > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> > index 724ec0f..b3eb318 100644
> > --- a/arch/arm/mach-exynos/Kconfig
> > +++ b/arch/arm/mach-exynos/Kconfig
> > @@ -17,6 +17,7 @@ choice
> >  
> >  config ARCH_EXYNOS4
> >  	bool "SAMSUNG EXYNOS4"
> > +	select HAVE_L2X0_L2CC
> >  	help
> >  	  Samsung EXYNOS4 SoCs based systems
> >  
> > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> > index 5034147..f4e7e6a 100644
> > --- a/arch/arm/mach-omap2/Kconfig
> > +++ b/arch/arm/mach-omap2/Kconfig
> > @@ -44,6 +44,7 @@ config ARCH_OMAP4
> >  	select CPU_V7
> >  	select ARM_GIC
> >  	select LOCAL_TIMERS if SMP
> > +	select HAVE_L2X0_L2CC
> >  	select PL310_ERRATA_588369
> >  	select PL310_ERRATA_727915
> >  	select ARM_ERRATA_720789
> > diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
> > index dba6d0c..3dfd6b8 100644
> > --- a/arch/arm/mach-realview/Kconfig
> > +++ b/arch/arm/mach-realview/Kconfig
> > @@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
> >  	bool "Support Multicore Cortex-A9 Tile"
> >  	depends on MACH_REALVIEW_EB
> >  	select CPU_V7
> > +	select HAVE_L2X0_L2CC
> >  	help
> >  	  Enable support for the Cortex-A9MPCore tile fitted to the
> >  	  Realview(R) Emulation Baseboard platform.
> > @@ -20,6 +21,7 @@ config REALVIEW_EB_ARM11MP
> >  	bool "Support ARM11MPCore Tile"
> >  	depends on MACH_REALVIEW_EB
> >  	select CPU_V6K
> > +	select HAVE_L2X0_L2CC
> >  	select ARCH_HAS_BARRIERS if SMP
> >  	help
> >  	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
> > @@ -38,6 +40,7 @@ config MACH_REALVIEW_PB11MP
> >  	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
> >  	select CPU_V6K
> >  	select ARM_GIC
> > +	select HAVE_L2X0_L2CC
> >  	select HAVE_PATA_PLATFORM
> >  	select ARCH_HAS_BARRIERS if SMP
> >  	help
> > @@ -50,6 +53,7 @@ config MACH_REALVIEW_PB1176
> >  	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
> >  	select CPU_V6
> >  	select ARM_GIC
> > +	select HAVE_L2X0_L2CC
> >  	select HAVE_TCM
> >  	help
> >  	  Include support for the ARM(R) RealView(R) Platform Baseboard for
> > @@ -77,6 +81,7 @@ config MACH_REALVIEW_PBA8
> >  config MACH_REALVIEW_PBX
> >  	bool "Support RealView(R) Platform Baseboard Explore"
> >  	select ARM_GIC
> > +	select HAVE_L2X0_L2CC
> >  	select HAVE_PATA_PLATFORM
> >  	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
> >  	select ZONE_DMA if SPARSEMEM
> > diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> > index 9311484..78d4f28 100644
> > --- a/arch/arm/mach-vexpress/Kconfig
> > +++ b/arch/arm/mach-vexpress/Kconfig
> > @@ -5,6 +5,7 @@ config ARCH_VEXPRESS_CA9X4
> >  	bool "Versatile Express Cortex-A9x4 tile"
> >  	select CPU_V7
> >  	select ARM_GIC
> > +	select HAVE_L2X0_L2CC
> >  	select ARM_ERRATA_720789
> >  	select ARM_ERRATA_751472
> >  	select ARM_ERRATA_753970
> > diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> > index 67f75a0..bb743df 100644
> > --- a/arch/arm/mm/Kconfig
> > +++ b/arch/arm/mm/Kconfig
> > @@ -816,13 +816,16 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
> >  	  Say Y here to use the Feroceon L2 cache in writethrough mode.
> >  	  Unless you specifically require this, say N for writeback mode.
> >  
> > +config HAVE_L2X0_L2CC
> > +	bool
> > +	default n
> 
> n is the default already.
> 
> > +	help
> > +	  This option should be selected by machines which have a L2x0
> > +	  or PL310 cache controller.
> > +
> >  config CACHE_L2X0
> >  	bool "Enable the L2x0 outer cache controller"
> > -	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
> > -		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
> > -		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
> > -		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
> > -		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
> > +	depends on HAVE_L2X0_L2CC
> 
> For platforms that run in non-secure mode, this shouldn't really be a
> user selectable option. Perhaps those should just select CACHE_L2X0
> directly. I'm not sure which one's those are other than Highbank and OMAP4.

Highbank doesn't currently have this.  Should I add this, or should we
leave that for a separate patch?

Arguably, a refactoring patch shouldn't change the Kconfig behaviour --
possibly anything which is currently broken should stay broken (but can
be fixed later).

Cheers
---Dave
Rob Herring Dec. 12, 2011, 3:31 p.m. UTC | #7
On 12/12/2011 09:14 AM, Dave Martin wrote:
> On Tue, Nov 29, 2011 at 01:25:55PM -0600, Rob Herring wrote:
>> On 11/29/2011 10:32 AM, Dave Martin wrote:

[snip]

>>>  config CACHE_L2X0
>>>  	bool "Enable the L2x0 outer cache controller"
>>> -	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
>>> -		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
>>> -		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
>>> -		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
>>> -		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
>>> +	depends on HAVE_L2X0_L2CC
>>
>> For platforms that run in non-secure mode, this shouldn't really be a
>> user selectable option. Perhaps those should just select CACHE_L2X0
>> directly. I'm not sure which one's those are other than Highbank and OMAP4.
> 
> Highbank doesn't currently have this.  Should I add this, or should we
> leave that for a separate patch?
> 
> Arguably, a refactoring patch shouldn't change the Kconfig behaviour --
> possibly anything which is currently broken should stay broken (but can
> be fixed later).

I thinking highbank wouldn't need HAVE_L2X0_L2CC, but it does to satisfy
dependencies. So you're right, it should probably be separate.

Rob
Uwe Kleine-König Dec. 12, 2011, 3:47 p.m. UTC | #8
$Subject ~= s/pl2x0/l2x0/

Best regards
Uwe
Dave Martin Dec. 13, 2011, 10:50 a.m. UTC | #9
On Mon, Dec 12, 2011 at 04:47:42PM +0100, Uwe Kleine-K?nig wrote:
> $Subject ~= s/pl2x0/l2x0/
> 
> Best regards
> Uwe

You're right -- in fact I'd already spotted that and changed it locally.
It will appear in the next post.

Thanks anyway
---Dave
diff mbox

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..4068fe5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -339,6 +339,7 @@  config ARCH_HIGHBANK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
+	select HAVE_L2X0_L2CC
 	select ARM_TIMER_SP804
 	select CLKDEV_LOOKUP
 	select CPU_V7
@@ -359,6 +360,7 @@  config ARCH_CLPS711X
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	select CPU_V6K
+	select HAVE_L2X0_L2CC
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
 	select MIGHT_HAVE_PCI
@@ -377,6 +379,7 @@  config ARCH_GEMINI
 config ARCH_PRIMA2
 	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
 	select CPU_V7
+	select HAVE_L2X0_L2CC
 	select NO_IOPORT
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
@@ -627,6 +630,7 @@  config ARCH_W90X900
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
+	select HAVE_L2X0_L2CC
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
@@ -699,6 +703,7 @@  config ARCH_MSM
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
+	select HAVE_L2X0_L2CC
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
@@ -900,6 +905,7 @@  config ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
 	select CPU_V7
 	select ARM_AMBA
+	select HAVE_L2X0_L2CC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
@@ -912,6 +918,7 @@  config ARCH_NOMADIK
 	select ARM_AMBA
 	select ARM_VIC
 	select CPU_ARM926T
+	select HAVE_L2X0_L2CC
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
@@ -968,6 +975,7 @@  config ARCH_VT8500
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
 	select CPU_V7
+	select HAVE_L2X0_L2CC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select ARM_GIC
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..b3eb318 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@  choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_L2X0_L2CC
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..f4e7e6a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,6 +44,7 @@  config ARCH_OMAP4
 	select CPU_V7
 	select ARM_GIC
 	select LOCAL_TIMERS if SMP
+	select HAVE_L2X0_L2CC
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..3dfd6b8 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@  config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select HAVE_L2X0_L2CC
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
@@ -20,6 +21,7 @@  config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
+	select HAVE_L2X0_L2CC
 	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
@@ -38,6 +40,7 @@  config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	select CPU_V6K
 	select ARM_GIC
+	select HAVE_L2X0_L2CC
 	select HAVE_PATA_PLATFORM
 	select ARCH_HAS_BARRIERS if SMP
 	help
@@ -50,6 +53,7 @@  config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	select CPU_V6
 	select ARM_GIC
+	select HAVE_L2X0_L2CC
 	select HAVE_TCM
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -77,6 +81,7 @@  config MACH_REALVIEW_PBA8
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
+	select HAVE_L2X0_L2CC
 	select HAVE_PATA_PLATFORM
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..78d4f28 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -5,6 +5,7 @@  config ARCH_VEXPRESS_CA9X4
 	bool "Versatile Express Cortex-A9x4 tile"
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_L2X0_L2CC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..bb743df 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -816,13 +816,16 @@  config CACHE_FEROCEON_L2_WRITETHROUGH
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
 
+config HAVE_L2X0_L2CC
+	bool
+	default n
+	help
+	  This option should be selected by machines which have a L2x0
+	  or PL310 cache controller.
+
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
+	depends on HAVE_L2X0_L2CC
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b..6871ed7 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@  config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select HAVE_L2X0_L2CC
 	help
 	  This enables support for systems based on the Freescale i.MX3 and i.MX6
 	  family.