diff mbox series

[5.15,020/846] mtd: rawnand: ingenic: JZ4740 needs oob_first read page function

Message ID 20220124184101.614244813@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Jan. 24, 2022, 6:32 p.m. UTC 
From: Paul Cercueil <paul@crapouillou.net>

commit 0171480007d64f663aae9226303f1b1e4621229e upstream.

The ECC engine on the JZ4740 SoC requires the ECC data to be read before
the page; using the default page reading function does not work. Indeed,
the old JZ4740 NAND driver (removed in 5.4) did use the 'OOB first' flag
that existed back then.

Use the newly created nand_read_page_hwecc_oob_first() to address this
issue.

This issue was not found when the new ingenic-nand driver was developed,
most likely because the Device Tree used had the nand-ecc-mode set to
"hw_oob_first", which seems to not be supported anymore.

Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c |    5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -32,6 +32,7 @@  struct jz_soc_info {
 	unsigned long addr_offset;
 	unsigned long cmd_offset;
 	const struct mtd_ooblayout_ops *oob_layout;
+	bool oob_first;
 };
 
 struct ingenic_nand_cs {
@@ -240,6 +241,9 @@  static int ingenic_nand_attach_chip(stru
 	if (chip->bbt_options & NAND_BBT_USE_FLASH)
 		chip->bbt_options |= NAND_BBT_NO_OOB;
 
+	if (nfc->soc_info->oob_first)
+		chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
 	/* For legacy reasons we use a different layout on the qi,lb60 board. */
 	if (of_machine_is_compatible("qi,lb60"))
 		mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
@@ -534,6 +538,7 @@  static const struct jz_soc_info jz4740_s
 	.data_offset = 0x00000000,
 	.cmd_offset = 0x00008000,
 	.addr_offset = 0x00010000,
+	.oob_first = true,
 };
 
 static const struct jz_soc_info jz4725b_soc_info = {