@@ -2320,6 +2320,9 @@ struct acpi_spi_lookup {
int irq;
u8 bits_per_word;
u8 chip_select;
+ int n;
+ int index;
+ int irq_index;
};
static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
@@ -2351,6 +2354,8 @@ static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
lookup->mode |= SPI_CPHA;
}
+static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev);
+
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
{
struct acpi_spi_lookup *lookup = data;
@@ -2364,14 +2369,35 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
sb = &ares->data.spi_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
+ if (lookup->index != -1 && lookup->n++ != lookup->index)
+ return 1;
+
+ if (lookup->index == -1 && !ctlr)
+ return -ENODEV;
+
status = acpi_get_handle(NULL,
sb->resource_source.string_ptr,
&parent_handle);
- if (ACPI_FAILURE(status) ||
- ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+ if (ACPI_FAILURE(status))
return -ENODEV;
+ if (ctlr) {
+ if (ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+ return -ENODEV;
+ } else {
+ struct acpi_device *adev;
+
+ if (acpi_bus_get_device(parent_handle, &adev))
+ return -ENODEV;
+
+ ctlr = acpi_spi_find_controller_by_adev(adev);
+ if (!ctlr)
+ return -ENODEV;
+
+ lookup->ctlr = ctlr;
+ }
+
/*
* ACPI DeviceSelection numbering is handled by the
* host controller driver in Windows and can vary
@@ -2402,7 +2428,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
} else if (lookup->irq < 0) {
struct resource r;
- if (acpi_dev_resource_interrupt(ares, 0, &r))
+ if (acpi_dev_resource_interrupt(ares, lookup->irq_index, &r))
lookup->irq = r.start;
}
@@ -2414,14 +2440,22 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
* acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
* @ctlr: controller to which the spi device belongs
* @adev: ACPI Device for the spi device
+ * @index: Index of the spi resource inside the ACPI Node
+ * @irq_index: Index of the GPIO resource for the IRQ inside the ACPI Node
*
* This should be used to allocate a new spi device from and ACPI Node.
* The caller is responsible for calling spi_add_device to register the spi device.
*
+ * If ctlr is set to NULL, the Controller for the spi device will be looked up
+ * using the resource.
+ * If index is set to -1, index is not used.
+ * Note: If index is -1, ctlr must be set.
+ *
* Return: a pointer to the new device, or ERR_PTR on error.
*/
struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
- struct acpi_device *adev)
+ struct acpi_device *adev,
+ int index, int irq_index)
{
acpi_handle parent_handle = NULL;
struct list_head resource_list;
@@ -2429,8 +2463,14 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
struct spi_device *spi;
int ret;
+ if (!ctlr && index == -1)
+ return ERR_PTR(-EINVAL);
+
lookup.ctlr = ctlr;
lookup.irq = -1;
+ lookup.index = index;
+ lookup.n = 0;
+ lookup.irq_index = irq_index;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
@@ -2443,7 +2483,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
if (!lookup.max_speed_hz &&
ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
- ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
+ ACPI_HANDLE(lookup.ctlr->dev.parent) == parent_handle) {
/* Apple does not use _CRS but nested devices for SPI slaves */
acpi_spi_parse_apple_properties(adev, &lookup);
}
@@ -2451,9 +2491,9 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
if (!lookup.max_speed_hz)
return ERR_PTR(-ENODEV);
- spi = spi_alloc_device(ctlr);
+ spi = spi_alloc_device(lookup.ctlr);
if (!spi) {
- dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
+ dev_err(&lookup.ctlr->dev, "failed to allocate SPI device for %s\n",
dev_name(&adev->dev));
return ERR_PTR(-ENOMEM);
}
@@ -2478,7 +2518,7 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
acpi_device_enumerated(adev))
return AE_OK;
- spi = acpi_spi_device_alloc(ctlr, adev);
+ spi = acpi_spi_device_alloc(ctlr, adev, -1, 0);
if (IS_ERR(spi)) {
if (PTR_ERR(spi) == -ENOMEM)
return AE_NO_MEMORY;
@@ -762,10 +762,12 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
#if IS_ENABLED(CONFIG_ACPI)
extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
- struct acpi_device *adev);
+ struct acpi_device *adev,
+ int index, int irq_index);
#else
static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
- struct acpi_device *adev);
+ struct acpi_device *adev,
+ int index, int irq_index);
{
return ERR_PTR(-EOPNOTSUPP);
}
If a node contains more than one Spi Resources, it may be necessary to use an index to select which one you want to allocate a spi device for. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> --- drivers/spi/spi.c | 56 +++++++++++++++++++++++++++++++++++------ include/linux/spi/spi.h | 6 +++-- 2 files changed, 52 insertions(+), 10 deletions(-)