new file mode 100644
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+ Circuit (MUIC).
+
+ There are two LED outputs available - FLED1 and FLED2. Each of them can
+ control a separate LED or they can be connected together to double the
+ maximum current for a single connected LED. One LED is represented by one
+ child node.
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ const: maxim,max77693-led
+
+ maxim,boost-mode:
+ description:
+ In boost mode the device can produce up to 1.2A of total current on both
+ outputs. The maximum current on each output is reduced to 625mA then. If
+ not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+ case both current sources are used.
+ See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ maxim,boost-mvout:
+ description: |
+ Output voltage of the boost module in millivolts.
+ Valid values: 3300 - 5500, step by 25 (rounded down)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3300
+ maximum: 5500
+ default: 3300
+
+ maxim,mvsys-min:
+ description: |
+ Low input voltage level in millivolts. Flash is not fired if chip
+ estimates that system voltage could drop below this level due to flash
+ power consumption.
+ Valid values: 2400 - 3400, step by 33 (rounded down)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2400
+ maximum: 3400
+ default: 2400
+
+patternProperties:
+ "^([a-z]+-)?led[01]?$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ led-sources:
+ allOf:
+ - minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+ led-max-microamp:
+ description: |
+ Valid values for a LED connected to one FLED output:
+ 15625 - 250000, step by 15625 (rounded down)
+ Valid values for a LED connected to both FLED outputs:
+ 15625 - 500000, step by 15625 (rounded down)
+
+ flash-max-microamp:
+ description: |
+ Valid values for a single LED connected to one FLED output
+ (boost mode must be turned off):
+ 15625 - 1000000, step by 15625 (rounded down)
+ Valid values for a single LED connected to both FLED outputs:
+ 15625 - 1250000, step by 15625 (rounded down)
+ Valid values for two LEDs case:
+ 15625 - 625000, step by 15625 (rounded down)
+
+ flash-max-timeout-us:
+ description: |
+ Valid values: 62500 - 1000000, step by 62500 (rounded down)
+ minimum: 62500
+ maximum: 1000000
+
+ required:
+ - flash-max-microamp
+ - flash-max-timeout-us
+ - led-max-microamp
+ - led-sources
+
+required:
+ - compatible
+
+additionalProperties: false
Convert the LEDs bindings of Maxim MAX77693 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max77693.txt. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/leds/maxim,max77693.yaml | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/maxim,max77693.yaml