diff mbox series

[5.4] net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081

Message ID 20220107143043.2189378-1-w.egorov@phytec.de
State New
Headers show
Series [5.4] net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 | expand

Commit Message

Wadim Egorov Jan. 7, 2022, 2:30 p.m. UTC 
From: Christian Melki <christian.melki@t2data.com>

commit 764d31cacfe48440745c4bbb55a62ac9471c9f19 upstream.

Following a similar reinstate for the KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

Bluntly removing that default may expose a lot of situations where various
PHYs/board implementations won't recover on various changes.
Like with this implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if it
did open a can of worms?

Atleast this fixes one iMX6 FEC/RMII/8081 combo.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <christian.melki@t2data.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 drivers/net/phy/micrel.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0b61d80ea3f8..18cc5e4280e8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1096,6 +1096,7 @@  static struct phy_driver ksphy_driver[] = {
 	.probe		= kszphy_probe,
 	.config_init	= ksz8081_config_init,
 	.ack_interrupt	= kszphy_ack_interrupt,
+	.soft_reset	= genphy_soft_reset,
 	.config_intr	= kszphy_config_intr,
 	.get_sset_count = kszphy_get_sset_count,
 	.get_strings	= kszphy_get_strings,