diff mbox

[PULL,18/27] i.MX: Add SOC support for i.MX31

Message ID 1441379156-23939-19-git-send-email-peter.maydell@linaro.org
State Accepted
Commit 558df83db778dc2e839353357a508349b180d79b
Headers show

Commit Message

Peter Maydell Sept. 4, 2015, 3:05 p.m. UTC
From: Jean-Christophe Dubois <jcd@tribudubois.net>

For now we support the following devices:
  * CPU: ARM1136
  * Interrupt Controller: AVIC
  * CCM
  * UART x 2
  * EPIT x 2
  * GPT

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 default-configs/arm-softmmu.mak |   2 +
 hw/arm/Makefile.objs            |   3 +-
 hw/arm/fsl-imx31.c              | 216 ++++++++++++++++++++++++++++++++++++++++
 include/hw/arm/fsl-imx31.h      |  98 ++++++++++++++++++
 4 files changed, 318 insertions(+), 1 deletion(-)
 create mode 100644 hw/arm/fsl-imx31.c
 create mode 100644 include/hw/arm/fsl-imx31.h
diff mbox

Patch

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 99b41e9..e2fa1ee 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -98,6 +98,8 @@  CONFIG_ALLWINNER_A10_PIT=y
 CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
 
+CONFIG_FSL_IMX31=y
+
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index cf346c1..2fbe344 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -1,6 +1,6 @@ 
 obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o
 obj-$(CONFIG_DIGIC) += digic_boards.o
-obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o
+obj-y += integratorcp.o mainstone.o musicpal.o nseries.o
 obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
 obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
@@ -13,3 +13,4 @@  obj-y += omap1.o omap2.o strongarm.o
 obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
 obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
 obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
+obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c
new file mode 100644
index 0000000..1681ecf
--- /dev/null
+++ b/hw/arm/fsl-imx31.c
@@ -0,0 +1,216 @@ 
+/*
+ * Copyright (c) 2013 Jean-Christophe Dubois <jcd@tribudubois.net>
+ *
+ * i.MX31 SOC emulation.
+ *
+ * Based on hw/arm/fsl-imx31.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/arm/fsl-imx31.h"
+#include "sysemu/sysemu.h"
+#include "exec/address-spaces.h"
+#include "hw/boards.h"
+#include "sysemu/char.h"
+
+static void fsl_imx31_init(Object *obj)
+{
+    FslIMX31State *s = FSL_IMX31(obj);
+    int i;
+
+    object_initialize(&s->cpu, sizeof(s->cpu), "arm1136-" TYPE_ARM_CPU);
+
+    object_initialize(&s->avic, sizeof(s->avic), TYPE_IMX_AVIC);
+    qdev_set_parent_bus(DEVICE(&s->avic), sysbus_get_default());
+
+    object_initialize(&s->ccm, sizeof(s->ccm), TYPE_IMX_CCM);
+    qdev_set_parent_bus(DEVICE(&s->ccm), sysbus_get_default());
+
+    for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) {
+        object_initialize(&s->uart[i], sizeof(s->uart[i]), TYPE_IMX_SERIAL);
+        qdev_set_parent_bus(DEVICE(&s->uart[i]), sysbus_get_default());
+    }
+
+    object_initialize(&s->gpt, sizeof(s->gpt), TYPE_IMX_GPT);
+    qdev_set_parent_bus(DEVICE(&s->gpt), sysbus_get_default());
+
+    for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) {
+        object_initialize(&s->epit[i], sizeof(s->epit[i]), TYPE_IMX_EPIT);
+        qdev_set_parent_bus(DEVICE(&s->epit[i]), sysbus_get_default());
+    }
+}
+
+static void fsl_imx31_realize(DeviceState *dev, Error **errp)
+{
+    FslIMX31State *s = FSL_IMX31(dev);
+    uint16_t i;
+    Error *err = NULL;
+
+    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    object_property_set_bool(OBJECT(&s->avic), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->avic), 0, FSL_IMX31_AVIC_ADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 0,
+                       qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 1,
+                       qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
+
+    object_property_set_bool(OBJECT(&s->ccm), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX31_CCM_ADDR);
+
+    /* Initialize all UARTS */
+    for (i = 0; i < FSL_IMX31_NUM_UARTS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } serial_table[FSL_IMX31_NUM_UARTS] = {
+            { FSL_IMX31_UART1_ADDR, FSL_IMX31_UART1_IRQ },
+            { FSL_IMX31_UART2_ADDR, FSL_IMX31_UART2_IRQ },
+        };
+
+        if (i < MAX_SERIAL_PORTS) {
+            CharDriverState *chr;
+
+            chr = serial_hds[i];
+
+            if (!chr) {
+                char label[20];
+                snprintf(label, sizeof(label), "imx31.uart%d", i);
+                chr = qemu_chr_new(label, "null", NULL);
+            }
+
+            qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", chr);
+        }
+
+        object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
+                           qdev_get_gpio_in(DEVICE(&s->avic),
+                                            serial_table[i].irq));
+    }
+
+    s->gpt.ccm = DEVICE(&s->ccm);
+
+    object_property_set_bool(OBJECT(&s->gpt), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt), 0, FSL_IMX31_GPT_ADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt), 0,
+                       qdev_get_gpio_in(DEVICE(&s->avic), FSL_IMX31_GPT_IRQ));
+
+    /* Initialize all EPIT timers */
+    for (i = 0; i < FSL_IMX31_NUM_EPITS; i++) {
+        static const struct {
+            hwaddr addr;
+            unsigned int irq;
+        } epit_table[FSL_IMX31_NUM_EPITS] = {
+            { FSL_IMX31_EPIT1_ADDR, FSL_IMX31_EPIT1_IRQ },
+            { FSL_IMX31_EPIT2_ADDR, FSL_IMX31_EPIT2_IRQ },
+        };
+
+        s->epit[i].ccm = DEVICE(&s->ccm);
+
+        object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
+                           qdev_get_gpio_in(DEVICE(&s->avic),
+                                            epit_table[i].irq));
+    }
+
+    /* On a real system, the first 16k is a `secure boot rom' */
+    memory_region_init_rom_device(&s->secure_rom, NULL, NULL, NULL,
+                                  "imx31.secure_rom",
+                                  FSL_IMX31_SECURE_ROM_SIZE, &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(), FSL_IMX31_SECURE_ROM_ADDR,
+                                &s->secure_rom);
+
+    /* There is also a 16k ROM */
+    memory_region_init_rom_device(&s->rom, NULL, NULL, NULL, "imx31.rom",
+                                  FSL_IMX31_ROM_SIZE, &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(), FSL_IMX31_ROM_ADDR,
+                                &s->rom);
+
+    /* initialize internal RAM (16 KB) */
+    memory_region_init_ram(&s->iram, NULL, "imx31.iram", FSL_IMX31_IRAM_SIZE,
+                           &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ADDR,
+                                &s->iram);
+    vmstate_register_ram_global(&s->iram);
+
+    /* internal RAM (16 KB) is aliased over 256 MB - 16 KB */
+    memory_region_init_alias(&s->iram_alias, NULL, "imx31.iram_alias",
+                             &s->iram, 0, FSL_IMX31_IRAM_ALIAS_SIZE);
+    memory_region_add_subregion(get_system_memory(), FSL_IMX31_IRAM_ALIAS_ADDR,
+                                &s->iram_alias);
+}
+
+static void fsl_imx31_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = fsl_imx31_realize;
+}
+
+static const TypeInfo fsl_imx31_type_info = {
+    .name = TYPE_FSL_IMX31,
+    .parent = TYPE_DEVICE,
+    .instance_size = sizeof(FslIMX31State),
+    .instance_init = fsl_imx31_init,
+    .class_init = fsl_imx31_class_init,
+};
+
+static void fsl_imx31_register_types(void)
+{
+    type_register_static(&fsl_imx31_type_info);
+}
+
+type_init(fsl_imx31_register_types)
diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h
new file mode 100644
index 0000000..09508e3
--- /dev/null
+++ b/include/hw/arm/fsl-imx31.h
@@ -0,0 +1,98 @@ 
+/*
+ * Freescale i.MX31 SoC emulation
+ *
+ * Copyright (C) 2015 Jean-Christophe Dubois <jcd@tribudubois.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#ifndef FSL_IMX31_H
+#define FSL_IMX31_H
+
+#include "hw/arm/arm.h"
+#include "hw/intc/imx_avic.h"
+#include "hw/misc/imx_ccm.h"
+#include "hw/char/imx_serial.h"
+#include "hw/timer/imx_gpt.h"
+#include "hw/timer/imx_epit.h"
+#include "exec/memory.h"
+
+#define TYPE_FSL_IMX31 "fsl,imx31"
+#define FSL_IMX31(obj) OBJECT_CHECK(FslIMX31State, (obj), TYPE_FSL_IMX31)
+
+#define FSL_IMX31_NUM_UARTS 2
+#define FSL_IMX31_NUM_EPITS 2
+
+typedef struct FslIMX31State {
+    /*< private >*/
+    DeviceState parent_obj;
+
+    /*< public >*/
+    ARMCPU         cpu;
+    IMXAVICState   avic;
+    IMXCCMState    ccm;
+    IMXSerialState uart[FSL_IMX31_NUM_UARTS];
+    IMXGPTState    gpt;
+    IMXEPITState   epit[FSL_IMX31_NUM_EPITS];
+    MemoryRegion   secure_rom;
+    MemoryRegion   rom;
+    MemoryRegion   iram;
+    MemoryRegion   iram_alias;
+} FslIMX31State;
+
+#define FSL_IMX31_SECURE_ROM_ADDR       0x00000000
+#define FSL_IMX31_SECURE_ROM_SIZE       0x4000
+#define FSL_IMX31_ROM_ADDR              0x00404000
+#define FSL_IMX31_ROM_SIZE              0x4000
+#define FSL_IMX31_IRAM_ALIAS_ADDR       0x10000000
+#define FSL_IMX31_IRAM_ALIAS_SIZE       0xFFC0000
+#define FSL_IMX31_IRAM_ADDR             0x1FFFC000
+#define FSL_IMX31_IRAM_SIZE             0x4000
+#define FSL_IMX31_UART1_ADDR            0x43F90000
+#define FSL_IMX31_UART1_SIZE            0x4000
+#define FSL_IMX31_UART2_ADDR            0x43F94000
+#define FSL_IMX31_UART2_SIZE            0x4000
+#define FSL_IMX31_CCM_ADDR              0x53F80000
+#define FSL_IMX31_CCM_SIZE              0x4000
+#define FSL_IMX31_GPT_ADDR              0x53F90000
+#define FSL_IMX31_GPT_SIZE              0x4000
+#define FSL_IMX31_EPIT1_ADDR            0x53F94000
+#define FSL_IMX31_EPIT1_SIZE            0x4000
+#define FSL_IMX31_EPIT2_ADDR            0x53F98000
+#define FSL_IMX31_EPIT2_SIZE            0x4000
+#define FSL_IMX31_AVIC_ADDR             0x68000000
+#define FSL_IMX31_AVIC_SIZE             0x100
+#define FSL_IMX31_SDRAM0_ADDR           0x80000000
+#define FSL_IMX31_SDRAM0_SIZE           0x10000000
+#define FSL_IMX31_SDRAM1_ADDR           0x90000000
+#define FSL_IMX31_SDRAM1_SIZE           0x10000000
+#define FSL_IMX31_FLASH0_ADDR           0xA0000000
+#define FSL_IMX31_FLASH0_SIZE           0x8000000
+#define FSL_IMX31_FLASH1_ADDR           0xA8000000
+#define FSL_IMX31_FLASH1_SIZE           0x8000000
+#define FSL_IMX31_CS2_ADDR              0xB0000000
+#define FSL_IMX31_CS2_SIZE              0x2000000
+#define FSL_IMX31_CS3_ADDR              0xB2000000
+#define FSL_IMX31_CS3_SIZE              0x2000000
+#define FSL_IMX31_CS4_ADDR              0xB4000000
+#define FSL_IMX31_CS4_SIZE              0x2000000
+#define FSL_IMX31_CS5_ADDR              0xB6000000
+#define FSL_IMX31_CS5_SIZE              0x2000000
+#define FSL_IMX31_NAND_ADDR             0xB8000000
+#define FSL_IMX31_NAND_SIZE             0x1000
+
+#define FSL_IMX31_EPIT2_IRQ             27
+#define FSL_IMX31_EPIT1_IRQ             28
+#define FSL_IMX31_GPT_IRQ               29
+#define FSL_IMX31_UART2_IRQ             32
+#define FSL_IMX31_UART1_IRQ             45
+
+#endif /* FSL_IMX31_H */