@@ -20,6 +20,7 @@
#ifndef __ASM_SYSREG_H
#define __ASM_SYSREG_H
+#include <asm/compiler.h>
#include <linux/stringify.h>
#include <asm/opcodes.h>
@@ -88,25 +89,81 @@
/* Common SCTLR_ELx flags. */
#define SCTLR_ELx_EE (1 << 25)
+#define SCTLR_ELx_WXN (1 << 19)
#define SCTLR_ELx_I (1 << 12)
#define SCTLR_ELx_SA (1 << 3)
#define SCTLR_ELx_C (1 << 2)
#define SCTLR_ELx_A (1 << 1)
#define SCTLR_ELx_M 1
+#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
+ SCTLR_ELx_SA | SCTLR_ELx_I)
+
+/* SCTLR_EL2 specific flags. */
#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \
(1 << 18) | (1 << 22) | (1 << 23) | (1 << 28) | \
(1 << 29))
+#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \
+ (1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \
+ (1 << 17) | (1 << 20) | (1 << 21) | (1 << 24) | \
+ (1 << 26) | (1 << 27) | (1 << 30) | (1 << 31))
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ENDIAN_SET_EL2 SCTLR_ELx_EE
+#define ENDIAN_CLEAR_EL2 0
+#else
+#define ENDIAN_SET_EL2 0
+#define ENDIAN_CLEAR_EL2 SCTLR_ELx_EE
+#endif
+
+/* SCTLR_EL2 value used for the hyp-stub */
+#define SCTLR_EL2_SET (ENDIAN_SET_EL2 | SCTLR_EL2_RES1)
+#define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
+ SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \
+ ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)
+
+/* Check all the bits are accounted for */
+#define SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != ~0)
-#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
- SCTLR_ELx_SA | SCTLR_ELx_I)
/* SCTLR_EL1 specific flags. */
#define SCTLR_EL1_UCI (1 << 26)
+#define SCTLR_EL1_E0E (1 << 24)
#define SCTLR_EL1_SPAN (1 << 23)
+#define SCTLR_EL1_NTWE (1 << 18)
+#define SCTLR_EL1_NTWI (1 << 16)
#define SCTLR_EL1_UCT (1 << 15)
+#define SCTLR_EL1_DZE (1 << 14)
+#define SCTLR_EL1_UMA (1 << 9)
#define SCTLR_EL1_SED (1 << 8)
+#define SCTLR_EL1_ITD (1 << 7)
#define SCTLR_EL1_CP15BEN (1 << 5)
+#define SCTLR_EL1_SA0 (1 << 4)
+
+#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \
+ (1 << 29))
+#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \
+ (1 << 21) | (1 << 27) | (1 << 30) | (1 << 31))
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE)
+#define ENDIAN_CLEAR_EL1 0
+#else
+#define ENDIAN_SET_EL1 0
+#define ENDIAN_CLEAR_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE)
+#endif
+
+#define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\
+ SCTLR_EL1_SA0 | SCTLR_EL1_SED | SCTLR_ELx_I |\
+ SCTLR_EL1_DZE | SCTLR_EL1_UCT | SCTLR_EL1_NTWI |\
+ SCTLR_EL1_NTWE | SCTLR_EL1_SPAN | ENDIAN_SET_EL1 |\
+ SCTLR_EL1_UCI | SCTLR_EL1_RES1)
+#define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\
+ SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\
+ SCTLR_EL1_RES0)
+
+/* Check all the bits are accounted for */
+#define SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != ~0)
/* id_aa64isar0 */
#define ID_AA64ISAR0_RDM_SHIFT 28
@@ -244,6 +301,7 @@
#else
+#include <linux/build_bug.h>
#include <linux/types.h>
asm(
@@ -300,6 +358,9 @@ static inline void config_sctlr_el1(u32 clear, u32 set)
{
u32 val;
+ SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS;
+ SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS;
+
val = read_sysreg(sctlr_el1);
val &= ~clear;
val |= set;
@@ -490,17 +490,13 @@ ENTRY(el2_setup)
mrs x0, CurrentEL
cmp x0, #CurrentEL_EL2
b.eq 1f
- mrs x0, sctlr_el1
-CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1
-CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
+ mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1)
msr sctlr_el1, x0
mov w0, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1
isb
ret
-1: mrs x0, sctlr_el2
-CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2
-CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2
+1: mov_q x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2)
msr sctlr_el2, x0
#ifdef CONFIG_ARM64_VHE
@@ -585,10 +581,7 @@ install_el2_stub:
* requires no configuration, and all non-hyp-specific EL2 setup
* will be done via the _EL1 system register aliases in __cpu_setup.
*/
- /* sctlr_el1 */
- mov x0, #0x0800 // Set/clear RES{1,0} bits
-CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems
-CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
+ mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1)
msr sctlr_el1, x0
/* Coprocessor traps. */
@@ -413,11 +413,7 @@ ENTRY(__cpu_setup)
/*
* Prepare SCTLR
*/
- adr x5, crval
- ldp w5, w6, [x5]
- mrs x0, sctlr_el1
- bic x0, x0, x5 // clear bits
- orr x0, x0, x6 // set bits
+ mov_q x0, SCTLR_EL1_SET
/*
* Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
* both user and kernel.
@@ -453,21 +449,3 @@ ENTRY(__cpu_setup)
msr tcr_el1, x10
ret // return to head.S
ENDPROC(__cpu_setup)
-
- /*
- * We set the desired value explicitly, including those of the
- * reserved bits. The values of bits EE & E0E were set early in
- * el2_setup, which are left untouched below.
- *
- * n n T
- * U E WT T UD US IHBS
- * CE0 XWHW CZ ME TEEA S
- * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM
- * 0011 0... 1101 ..0. ..0. 10.. .0.. .... < hardware reserved
- * .... .1.. .... 01.1 11.1 ..01 0.01 1101 < software settings
- */
- .type crval, #object
-crval:
- .word 0xfcffffff // clear
- .word 0x34d5d91d // set
- .popsection