@@ -690,12 +690,12 @@ Minkyu Kang <mk7.kang@samsung.com>
SMDKC100 ARM ARMV7 (S5PC100 SoC)
s5p_goni ARM ARMV7 (S5PC110 SoC)
- s5pc210_universal ARM ARMV7 (S5PC210 SoC)
+ s5pc210_universal ARM ARMV7 (EXYNOS4210 SoC)
Chander Kashyap <k.chander@samsung.com>
- origen ARM ARMV7 (S5PC210 SoC)
- SMDKV310 ARM ARMV7 (S5PC210 SoC)
+ origen ARM ARMV7 (EXYNOS4210 SoC)
+ SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
Torsten Koschorrek <koschorrek@synertronixx.de>
scb9328 ARM920T (i.MXL)
@@ -303,7 +303,7 @@ endif
ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
-ifeq ($(SOC),s5pc2xx)
+ifeq ($(SOC),exynos4)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
similarity index 100%
rename from arch/arm/cpu/armv7/s5pc2xx/Makefile
rename to arch/arm/cpu/armv7/exynos4/Makefile
similarity index 80%
rename from arch/arm/cpu/armv7/s5pc2xx/clock.c
rename to arch/arm/cpu/armv7/exynos4/clock.c
@@ -30,11 +30,11 @@
#define CONFIG_SYS_CLK_FREQ_C210 24000000
#endif
-/* s5pc210: return pll clock frequency */
-static unsigned long s5pc210_get_pll_clk(int pllreg)
+/* exynos4210: return pll clock frequency */
+static unsigned long exynos4210_get_pll_clk(int pllreg)
{
- struct s5pc210_clock *clk =
- (struct s5pc210_clock *)samsung_get_base_clock();
+ struct exynos4210_clock *clk =
+ (struct exynos4210_clock *)samsung_get_base_clock();
unsigned long r, m, p, s, k = 0, mask, fout;
unsigned int freq;
@@ -96,11 +96,11 @@ static unsigned long s5pc210_get_pll_clk(int pllreg)
return fout;
}
-/* s5pc210: return ARM clock frequency */
-static unsigned long s5pc210_get_arm_clk(void)
+/* exynos4210: return ARM clock frequency */
+static unsigned long exynos4210_get_arm_clk(void)
{
- struct s5pc210_clock *clk =
- (struct s5pc210_clock *)samsung_get_base_clock();
+ struct exynos4210_clock *clk =
+ (struct exynos4210_clock *)samsung_get_base_clock();
unsigned long div;
unsigned long dout_apll;
unsigned int apll_ratio;
@@ -115,11 +115,11 @@ static unsigned long s5pc210_get_arm_clk(void)
return dout_apll;
}
-/* s5pc210: return pwm clock frequency */
-static unsigned long s5pc210_get_pwm_clk(void)
+/* exynos4210: return pwm clock frequency */
+static unsigned long exynos4210_get_pwm_clk(void)
{
- struct s5pc210_clock *clk =
- (struct s5pc210_clock *)samsung_get_base_clock();
+ struct exynos4210_clock *clk =
+ (struct exynos4210_clock *)samsung_get_base_clock();
unsigned long pclk, sclk;
unsigned int sel;
unsigned int ratio;
@@ -158,11 +158,11 @@ static unsigned long s5pc210_get_pwm_clk(void)
return pclk;
}
-/* s5pc210: return uart clock frequency */
-static unsigned long s5pc210_get_uart_clk(int dev_index)
+/* exynos4210: return uart clock frequency */
+static unsigned long exynos4210_get_uart_clk(int dev_index)
{
- struct s5pc210_clock *clk =
- (struct s5pc210_clock *)samsung_get_base_clock();
+ struct exynos4210_clock *clk =
+ (struct exynos4210_clock *)samsung_get_base_clock();
unsigned long uclk, sclk;
unsigned int sel;
unsigned int ratio;
@@ -205,11 +205,11 @@ static unsigned long s5pc210_get_uart_clk(int dev_index)
return uclk;
}
-/* s5pc210: set the mmc clock */
-static void s5pc210_set_mmc_clk(int dev_index, unsigned int div)
+/* exynos4210: set the mmc clock */
+static void exynos4210_set_mmc_clk(int dev_index, unsigned int div)
{
- struct s5pc210_clock *clk =
- (struct s5pc210_clock *)samsung_get_base_clock();
+ struct exynos4210_clock *clk =
+ (struct exynos4210_clock *)samsung_get_base_clock();
unsigned int addr;
unsigned int val;
@@ -234,25 +234,25 @@ static void s5pc210_set_mmc_clk(int dev_index, unsigned int div)
unsigned long get_pll_clk(int pllreg)
{
- return s5pc210_get_pll_clk(pllreg);
+ return exynos4210_get_pll_clk(pllreg);
}
unsigned long get_arm_clk(void)
{
- return s5pc210_get_arm_clk();
+ return exynos4210_get_arm_clk();
}
unsigned long get_pwm_clk(void)
{
- return s5pc210_get_pwm_clk();
+ return exynos4210_get_pwm_clk();
}
unsigned long get_uart_clk(int dev_index)
{
- return s5pc210_get_uart_clk(dev_index);
+ return exynos4210_get_uart_clk(dev_index);
}
void set_mmc_clk(int dev_index, unsigned int div)
{
- s5pc210_set_mmc_clk(dev_index, div);
+ exynos4210_set_mmc_clk(dev_index, div);
}
similarity index 100%
rename from arch/arm/cpu/armv7/s5pc2xx/soc.c
rename to arch/arm/cpu/armv7/exynos4/soc.c
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/adc.h
rename to arch/arm/include/asm/arch-exynos4/adc.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/clk.h
rename to arch/arm/include/asm/arch-exynos4/clk.h
similarity index 99%
rename from arch/arm/include/asm/arch-s5pc2xx/clock.h
rename to arch/arm/include/asm/arch-exynos4/clock.h
@@ -23,7 +23,7 @@
#define __ASM_ARM_ARCH_CLOCK_H_
#ifndef __ASSEMBLY__
-struct s5pc210_clock {
+struct exynos4210_clock {
unsigned char res1[0x4200];
unsigned int src_leftbus;
unsigned char res2[0x1fc];
similarity index 64%
rename from arch/arm/include/asm/arch-s5pc2xx/cpu.h
rename to arch/arm/include/asm/arch-exynos4/cpu.h
@@ -19,33 +19,33 @@
*
*/
-#ifndef _S5PC2XX_CPU_H
-#define _S5PC2XX_CPU_H
+#ifndef _EXYNOS4_CPU_H
+#define _EXYNOS4_CPU_H
#define S5PC2XX_ADDR_BASE 0x10000000
-/* S5PC210 */
-#define S5PC210_GPIO_PART3_BASE 0x03860000
-#define S5PC210_PRO_ID 0x10000000
-#define S5PC210_POWER_BASE 0x10020000
-#define S5PC210_SWRESET 0x10020400
-#define S5PC210_CLOCK_BASE 0x10030000
-#define S5PC210_SYSTIMER_BASE 0x10050000
-#define S5PC210_WATCHDOG_BASE 0x10060000
-#define S5PC210_MIU_BASE 0x10600000
-#define S5PC210_DMC0_BASE 0x10400000
-#define S5PC210_DMC1_BASE 0x10410000
-#define S5PC210_GPIO_PART2_BASE 0x11000000
-#define S5PC210_GPIO_PART1_BASE 0x11400000
-#define S5PC210_FIMD_BASE 0x11C00000
-#define S5PC210_USBOTG_BASE 0x12480000
-#define S5PC210_MMC_BASE 0x12510000
-#define S5PC210_SROMC_BASE 0x12570000
-#define S5PC210_USBPHY_BASE 0x125B0000
-#define S5PC210_UART_BASE 0x13800000
-#define S5PC210_ADC_BASE 0x13910000
-#define S5PC210_PWMTIMER_BASE 0x139D0000
-#define S5PC210_MODEM_BASE 0x13A00000
+/* EXYNOS4210 */
+#define EXYNOS4210_GPIO_PART3_BASE 0x03860000
+#define EXYNOS4210_PRO_ID 0x10000000
+#define EXYNOS4210_POWER_BASE 0x10020000
+#define EXYNOS4210_SWRESET 0x10020400
+#define EXYNOS4210_CLOCK_BASE 0x10030000
+#define EXYNOS4210_SYSTIMER_BASE 0x10050000
+#define EXYNOS4210_WATCHDOG_BASE 0x10060000
+#define EXYNOS4210_MIU_BASE 0x10600000
+#define EXYNOS4210_DMC0_BASE 0x10400000
+#define EXYNOS4210_DMC1_BASE 0x10410000
+#define EXYNOS4210_GPIO_PART2_BASE 0x11000000
+#define EXYNOS4210_GPIO_PART1_BASE 0x11400000
+#define EXYNOS4210_FIMD_BASE 0x11C00000
+#define EXYNOS4210_USBOTG_BASE 0x12480000
+#define EXYNOS4210_MMC_BASE 0x12510000
+#define EXYNOS4210_SROMC_BASE 0x12570000
+#define EXYNOS4210_USBPHY_BASE 0x125B0000
+#define EXYNOS4210_UART_BASE 0x13800000
+#define EXYNOS4210_ADC_BASE 0x13910000
+#define EXYNOS4210_PWMTIMER_BASE 0x139D0000
+#define EXYNOS4210_MODEM_BASE 0x13A00000
#ifndef __ASSEMBLY__
#include <asm/io.h>
@@ -60,12 +60,12 @@ static inline int s5p_get_cpu_rev(void)
static inline void s5p_set_cpu_id(void)
{
- s5p_cpu_id = readl(S5PC210_PRO_ID);
+ s5p_cpu_id = readl(EXYNOS4210_PRO_ID);
s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12));
/*
- * 0xC200: S5PC210 EVT0
- * 0xC210: S5PC210 EVT1
+ * 0xC200: EXYNOS4210 EVT0
+ * 0xC210: EXYNOS4210 EVT1
*/
if (s5p_cpu_id == 0xC200) {
s5p_cpu_id |= 0x10;
@@ -81,13 +81,13 @@ static inline int cpu_is_##type(void) \
return s5p_cpu_id == id ? 1 : 0; \
}
-IS_SAMSUNG_TYPE(s5pc210, 0xc210)
+IS_SAMSUNG_TYPE(exynos4210, 0xc210)
#define SAMSUNG_BASE(device, base) \
static inline unsigned int samsung_get_base_##device(void) \
{ \
- if (cpu_is_s5pc210()) \
- return S5PC210_##base; \
+ if (cpu_is_exynos4210()) \
+ return EXYNOS4210_##base; \
else \
return 0; \
}
@@ -110,4 +110,4 @@ SAMSUNG_BASE(usb_otg, USBOTG_BASE)
SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
#endif
-#endif /* _S5PC2XX_CPU_H */
+#endif /* _EXYNOS4_CPU_H */
similarity index 83%
rename from arch/arm/include/asm/arch-s5pc2xx/gpio.h
rename to arch/arm/include/asm/arch-exynos4/gpio.h
@@ -32,7 +32,7 @@ struct s5p_gpio_bank {
unsigned char res1[8];
};
-struct s5pc210_gpio_part1 {
+struct exynos4210_gpio_part1 {
struct s5p_gpio_bank a0;
struct s5p_gpio_bank a1;
struct s5p_gpio_bank b;
@@ -51,7 +51,7 @@ struct s5pc210_gpio_part1 {
struct s5p_gpio_bank f3;
};
-struct s5pc210_gpio_part2 {
+struct exynos4210_gpio_part2 {
struct s5p_gpio_bank j0;
struct s5p_gpio_bank j1;
struct s5p_gpio_bank k0;
@@ -75,7 +75,7 @@ struct s5pc210_gpio_part2 {
struct s5p_gpio_bank x3;
};
-struct s5pc210_gpio_part3 {
+struct exynos4210_gpio_part3 {
struct s5p_gpio_bank z;
};
@@ -92,27 +92,27 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
/* GPIO pins per bank */
#define GPIO_PER_BANK 8
-#define s5pc210_gpio_part1_get_nr(bank, pin) \
- ((((((unsigned int) &(((struct s5pc210_gpio_part1 *) \
- S5PC210_GPIO_PART1_BASE)->bank)) \
- - S5PC210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
+#define exynos4210_gpio_part1_get_nr(bank, pin) \
+ ((((((unsigned int) &(((struct exynos4210_gpio_part1 *) \
+ EXYNOS4210_GPIO_PART1_BASE)->bank)) \
+ - EXYNOS4210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
* GPIO_PER_BANK) + pin)
-#define GPIO_PART1_MAX ((sizeof(struct s5pc210_gpio_part1) \
+#define GPIO_PART1_MAX ((sizeof(struct exynos4210_gpio_part1) \
/ sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-#define s5pc210_gpio_part2_get_nr(bank, pin) \
- (((((((unsigned int) &(((struct s5pc210_gpio_part2 *) \
- S5PC210_GPIO_PART2_BASE)->bank)) \
- - S5PC210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
+#define exynos4210_gpio_part2_get_nr(bank, pin) \
+ (((((((unsigned int) &(((struct exynos4210_gpio_part2 *) \
+ EXYNOS4210_GPIO_PART2_BASE)->bank)) \
+ - EXYNOS4210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
* GPIO_PER_BANK) + pin) + GPIO_PART1_MAX)
static inline unsigned int s5p_gpio_base(int nr)
{
if (nr < GPIO_PART1_MAX)
- return S5PC210_GPIO_PART1_BASE;
+ return EXYNOS4210_GPIO_PART1_BASE;
else
- return S5PC210_GPIO_PART2_BASE;
+ return EXYNOS4210_GPIO_PART2_BASE;
return 0;
}
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/mmc.h
rename to arch/arm/include/asm/arch-exynos4/mmc.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/pwm.h
rename to arch/arm/include/asm/arch-exynos4/pwm.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/sromc.h
rename to arch/arm/include/asm/arch-exynos4/sromc.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/sys_proto.h
rename to arch/arm/include/asm/arch-exynos4/sys_proto.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/uart.h
rename to arch/arm/include/asm/arch-exynos4/uart.h
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for ORIGEN board based on S5PV310
+ * Lowlevel setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -43,11 +43,11 @@ lowlevel_init:
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4210_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4210_GPIO_PART2_BASE
/* check reset status */
- ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
+ ldr r0, =(EXYNOS4210_POWER_BASE + INFORM1_OFFSET)
ldr r1, [r0]
/* AFTR wakeup reset */
@@ -97,9 +97,9 @@ wakeup_reset:
exit_wakeup:
/* Load return address and jump to kernel */
- ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
+ ldr r0, =(EXYNOS4210_POWER_BASE + INFORM0_OFFSET)
- /* r1 = physical address of s5pc210_cpu_resume function */
+ /* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
@@ -113,7 +113,7 @@ exit_wakeup:
*/
system_clock_init:
push {lr}
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =CLK_SRC_CPU_VAL
@@ -290,13 +290,13 @@ uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
- ldr r1, =S5PC210_GPIO_A0_CON_VAL
- str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
- ldr r1, =S5PC210_GPIO_A1_CON_VAL
- str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
+ ldr r1, =EXYNOS4210_GPIO_A0_CON_VAL
+ str r1, [r0, #EXYNOS4210_GPIO_A0_CON_OFFSET]
+ ldr r1, =EXYNOS4210_GPIO_A1_CON_VAL
+ str r1, [r0, #EXYNOS4210_GPIO_A1_CON_OFFSET]
- ldr r0, =S5PC210_UART_BASE
- add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+ ldr r0, =EXYNOS4210_UART_BASE
+ add r0, r0, #EXYNOS4210_DEFAULT_UART_OFFSET
ldr r1, =ULCON_VAL
str r1, [r0, #ULCON_OFFSET]
@@ -1,5 +1,5 @@
/*
- * Memory setup for ORIGEN board based on S5PV310
+ * Memory setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -38,7 +38,7 @@ mem_ctrl_asm_init:
str r1, [r0]
#ifdef SET_MIU
- ldr r0, =S5PC210_MIU_BASE
+ ldr r0, =EXYNOS4210_MIU_BASE
/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
ldr r1, =0x20001507
str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
@@ -48,7 +48,7 @@ mem_ctrl_asm_init:
str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
#endif
/* DREX0 */
- ldr r0, =S5PC210_DMC0_BASE
+ ldr r0, =EXYNOS4210_DMC0_BASE
/*
* DLL Parameter Setting:
@@ -229,7 +229,7 @@ mem_ctrl_asm_init:
bne 8b
/* DREX1 */
- ldr r0, =S5PC210_DMC1_BASE @0x10410000
+ ldr r0, =EXYNOS4210_DMC1_BASE @0x10410000
/*
* DLL Parameter Setting:
@@ -410,11 +410,11 @@ mem_ctrl_asm_init:
bne 8b
/* turn on DREX0, DREX1 */
- ldr r0, =S5PC210_DMC0_BASE
+ ldr r0, =EXYNOS4210_DMC0_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
- ldr r0, =S5PC210_DMC1_BASE
+ ldr r0, =EXYNOS4210_DMC1_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
@@ -27,13 +27,13 @@
#include <asm/arch/mmc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4210_gpio_part1 *gpio1;
+struct exynos4210_gpio_part2 *gpio2;
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4210_gpio_part1 *) EXYNOS4210_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4210_gpio_part2 *) EXYNOS4210_GPIO_PART2_BASE;
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
return 0;
@@ -98,8 +98,8 @@
#define INFORM1_OFFSET 0x804
/* GPIO Offsets for UART: GPIO Contol Register */
-#define S5PC210_GPIO_A0_CON_OFFSET 0x00
-#define S5PC210_GPIO_A1_CON_OFFSET 0x20
+#define EXYNOS4210_GPIO_A0_CON_OFFSET 0x00
+#define EXYNOS4210_GPIO_A1_CON_OFFSET 0x20
/* UART Register offsets */
#define ULCON_OFFSET 0x00
@@ -416,8 +416,8 @@
* UART GPIO_A0/GPIO_A1 Control Register Value
* 0x2: UART Function
*/
-#define S5PC210_GPIO_A0_CON_VAL 0x22222222
-#define S5PC210_GPIO_A1_CON_VAL 0x222222
+#define EXYNOS4210_GPIO_A0_CON_VAL 0x22222222
+#define EXYNOS4210_GPIO_A1_CON_VAL 0x222222
/* ULCON: UART Line Control Value 8N1 */
#define WORD_LEN_5_BIT 0x00
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for SMDKV310 board based on S5PC210
+ * Lowlevel setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -45,11 +45,11 @@ lowlevel_init:
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4210_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4210_GPIO_PART2_BASE
/* check reset status */
- ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7
+ ldr r0, =(EXYNOS4210_POWER_BASE + 0x81C) @ INFORM7
ldr r1, [r0]
/* AFTR wakeup reset */
@@ -95,9 +95,9 @@ wakeup_reset:
exit_wakeup:
/* Load return address and jump to kernel */
- ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0
+ ldr r0, =(EXYNOS4210_POWER_BASE + 0x800) @ INFORM0
- /* r1 = physical address of s5pc210_cpu_resume function */
+ /* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
@@ -111,7 +111,7 @@ exit_wakeup:
*/
system_clock_init:
push {lr}
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
@@ -388,12 +388,12 @@ uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =0x22222222
- str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
+ str r1, [r0, #0x00] @ EXYNOS4210_GPIO_A0_OFFSET
ldr r1, =0x00222222
- str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
+ str r1, [r0, #0x20] @ EXYNOS4210_GPIO_A1_OFFSET
- ldr r0, =S5PC210_UART_BASE
- add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+ ldr r0, =EXYNOS4210_UART_BASE
+ add r0, r0, #EXYNOS4210_DEFAULT_UART_OFFSET
ldr r1, =0x3C5
str r1, [r0, #0x4]
@@ -1,5 +1,5 @@
/*
- * Memory setup for SMDKV310 board based on S5PC210
+ * Memory setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -54,7 +54,7 @@ mem_ctrl_asm_init:
str r1, [r0]
#ifdef SET_MIU
- ldr r0, =S5PC210_MIU_BASE @0x10600000
+ ldr r0, =EXYNOS4210_MIU_BASE @0x10600000
#ifdef CONFIG_MIU_1BIT_INTERLEAVED
ldr r1, =0x0000000c
str r1, [r0, #0x400] @MIU_INTLV_CONFIG
@@ -89,7 +89,7 @@ mem_ctrl_asm_init:
#endif
#endif
/* DREX0 */
- ldr r0, =S5PC210_DMC0_BASE @0x10400000
+ ldr r0, =EXYNOS4210_DMC0_BASE @0x10400000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
@@ -221,7 +221,7 @@ mem_ctrl_asm_init:
bne 8b
/* DREX1 */
- ldr r0, =S5PC210_DMC1_BASE @0x10410000
+ ldr r0, =EXYNOS4210_DMC1_BASE @0x10410000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
@@ -29,8 +29,8 @@
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4210_gpio_part1 *gpio1;
+struct exynos4210_gpio_part2 *gpio2;
static void smc9115_pre_init(void)
{
@@ -52,8 +52,8 @@ static void smc9115_pre_init(void)
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4210_gpio_part1 *) EXYNOS4210_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4210_gpio_part2 *) EXYNOS4210_GPIO_PART2_BASE;
smc9115_pre_init();
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for universal board based on S5PC210
+ * Lowlevel setup for universal board based on EXYNOS4210
*
* Copyright (C) 2010 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
@@ -43,11 +43,11 @@ lowlevel_init:
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4210_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4210_GPIO_PART2_BASE
/* System Timer */
- ldr r0, =S5PC210_SYSTIMER_BASE
+ ldr r0, =EXYNOS4210_SYSTIMER_BASE
ldr r1, =0x5000
str r1, [r0, #0x0]
ldr r1, =0xffffffff
@@ -57,7 +57,7 @@ lowlevel_init:
/* PMIC manual reset */
/* nPOWER: XEINT_23: GPX2[7] */
- add r0, r6, #0xC40 @ S5PC210_GPIO_X2_OFFSET
+ add r0, r6, #0xC40 @ EXYNOS4210_GPIO_X2_OFFSET
ldr r1, [r0, #0x0]
bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
orr r1, r1, #(0x1 << 28) @ Output
@@ -71,7 +71,7 @@ lowlevel_init:
bl system_clock_init
/* Disable Watchdog */
- ldr r0, =S5PC210_WATCHDOG_BASE @0x10060000
+ ldr r0, =EXYNOS4210_WATCHDOG_BASE @0x10060000
str r5, [r0]
/* UART */
@@ -99,12 +99,12 @@ uart_asm_init:
*/
mov r0, r7
ldr r1, =0x22222222
- str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
+ str r1, [r0, #0x00] @ EXYNOS4210_GPIO_A0_OFFSET
ldr r1, =0x00223322
- str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
+ str r1, [r0, #0x20] @ EXYNOS4210_GPIO_A1_OFFSET
- /* UART_SEL GPY4[7] (part2) at S5PC210 */
- add r0, r6, #0x1A0 @ S5PC210_GPIO_Y4_OFFSET
+ /* UART_SEL GPY4[7] (part2) at EXYNOS4210 */
+ add r0, r6, #0x1A0 @ EXYNOS4210_GPIO_Y4_OFFSET
ldr r1, [r0, #0x0]
bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
orr r1, r1, #(0x1 << 28)
@@ -125,7 +125,7 @@ uart_asm_init:
nop
system_clock_init:
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
@@ -326,7 +326,7 @@ system_clock_init:
nop
system_power_init:
- ldr r0, =S5PC210_POWER_BASE @ 0x10020000
+ ldr r0, =EXYNOS4210_POWER_BASE @ 0x10020000
ldr r2, =0x330C @ PS_HOLD_CONTROL
ldr r1, [r0, r2]
@@ -31,8 +31,8 @@
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4210_gpio_part1 *gpio1;
+struct exynos4210_gpio_part2 *gpio2;
unsigned int board_rev;
u32 get_board_rev(void)
@@ -49,8 +49,8 @@ static void check_hw_revision(void);
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4210_gpio_part1 *) EXYNOS4210_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4210_gpio_part2 *) EXYNOS4210_GPIO_PART2_BASE;
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -195,9 +195,9 @@ omap4_panda arm armv7 panda ti
omap4_sdp4430 arm armv7 sdp4430 ti omap4
s5p_goni arm armv7 goni samsung s5pc1xx
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
-origen arm armv7 origen samsung s5pc2xx
-s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx
-smdkv310 arm armv7 smdkv310 samsung s5pc2xx
+origen arm armv7 origen samsung exynos4
+s5pc210_universal arm armv7 universal_c210 samsung exynos4
+smdkv310 arm armv7 smdkv310 samsung exynos4
harmony arm armv7 harmony nvidia tegra2
seaboard arm armv7 seaboard nvidia tegra2
u8500_href arm armv7 u8500 st-ericsson u8500
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2011 Samsung Electronics
*
- * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board.
+ * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,7 +28,7 @@
/* High Level Configuration Options */
#define CONFIG_SAMSUNG 1 /* SAMSUNG core */
#define CONFIG_S5P 1 /* S5P Family */
-#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
+#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
#define CONFIG_ORIGEN 1 /* working with ORIGEN*/
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -68,7 +68,7 @@
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
#define CONFIG_BAUDRATE 115200
-#define S5PC210_DEFAULT_UART_OFFSET 0x020000
+#define EXYNOS4210_DEFAULT_UART_OFFSET 0x020000
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC 1
@@ -2,7 +2,7 @@
* Copyright (C) 2010 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
*
- * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -32,7 +32,7 @@
*/
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
-#define CONFIG_S5PC210 1 /* which is in a S5PC210 */
+#define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */
#define CONFIG_UNIVERSAL 1 /* working with Universal */
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -47,7 +47,7 @@
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x44800000
-/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */
#define CONFIG_SYS_CLK_FREQ_C210 24000000
#define CONFIG_SETUP_MEMORY_TAGS
@@ -249,8 +249,8 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C_GPIO_SCL s5pc210_gpio_part1_get_nr(b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA s5pc210_gpio_part1_get_nr(b, 6)
+#define CONFIG_SOFT_I2C_GPIO_SCL exynos4210_gpio_part1_get_nr(b, 7)
+#define CONFIG_SOFT_I2C_GPIO_SDA exynos4210_gpio_part1_get_nr(b, 6)
#define CONFIG_SOFT_I2C
#define CONFIG_SOFT_I2C_READ_REPEATED_START
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2011 Samsung Electronics
*
- * Configuration settings for the SAMSUNG SMDKV310 (S5PC210) board.
+ * Configuration settings for the SAMSUNG SMDKV310 (EXYNOS4210) board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,7 +28,7 @@
/* High Level Configuration Options */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* S5P Family */
-#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
+#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
#define CONFIG_SMDKV310 1 /* working with SMDKV310*/
#include <asm/arch/cpu.h> /* get chip and board defs */
@@ -65,7 +65,7 @@
#define CONFIG_SERIAL_MULTI 1
#define CONFIG_SERIAL1 1 /* use SERIAL 1 */
#define CONFIG_BAUDRATE 115200
-#define S5PC210_DEFAULT_UART_OFFSET 0x010000
+#define EXYNOS4210_DEFAULT_UART_OFFSET 0x010000
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC 1
As per new conventions Samsung SoC's are named as Exynos. Cortex-A9 based Soc's are named as exynos4. s5pc2xx is cortex-A9 based, hence renamed to exynos4. This is done as per kernel naming convetions. Similerly s5pc210 is now exynos4210. Hence S5PC210/s5pc210 suffix/prefix has been renamed to EXYNOS4210/exynos4210. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> --- Changes for v2: - Removed renaming of s5p-common to exynos4-common - Renamed s5pc210 prefixes to exynos4210 MAINTAINERS | 6 +- Makefile | 2 +- arch/arm/cpu/armv7/{s5pc2xx => exynos4}/Makefile | 0 arch/arm/cpu/armv7/{s5pc2xx => exynos4}/clock.c | 50 ++++++++-------- arch/arm/cpu/armv7/{s5pc2xx => exynos4}/soc.c | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/adc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/clk.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/clock.h | 2 +- .../asm/{arch-s5pc2xx => arch-exynos4}/cpu.h | 62 ++++++++++---------- .../asm/{arch-s5pc2xx => arch-exynos4}/gpio.h | 28 +++++----- .../asm/{arch-s5pc2xx => arch-exynos4}/mmc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/pwm.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/sromc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/sys_proto.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/uart.h | 0 board/samsung/origen/lowlevel_init.S | 26 ++++---- board/samsung/origen/mem_setup.S | 12 ++-- board/samsung/origen/origen.c | 8 +- board/samsung/origen/origen_setup.h | 8 +- board/samsung/smdkv310/lowlevel_init.S | 22 ++++---- board/samsung/smdkv310/mem_setup.S | 8 +- board/samsung/smdkv310/smdkv310.c | 8 +- board/samsung/universal_c210/lowlevel_init.S | 24 ++++---- board/samsung/universal_c210/universal.c | 8 +- boards.cfg | 6 +- include/configs/origen.h | 6 +- include/configs/s5pc210_universal.h | 10 ++-- include/configs/smdkv310.h | 6 +- 28 files changed, 151 insertions(+), 151 deletions(-) rename arch/arm/cpu/armv7/{s5pc2xx => exynos4}/Makefile (100%) rename arch/arm/cpu/armv7/{s5pc2xx => exynos4}/clock.c (80%) rename arch/arm/cpu/armv7/{s5pc2xx => exynos4}/soc.c (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/adc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/clk.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/clock.h (99%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/cpu.h (64%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/gpio.h (83%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/mmc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/pwm.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/sromc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/sys_proto.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/uart.h (100%)