@@ -11,7 +11,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_alive {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -27,7 +27,7 @@ gpa0: gpa0 {
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -47,7 +47,7 @@ dp1_hpd: dp1-hpd-pins {
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- gpq0: gpq0 {
+ gpq0: gpq0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -69,7 +69,7 @@ speedy1_bus: speedy1-bus-pins {
};
&pinctrl_aud {
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -77,7 +77,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -85,7 +85,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -93,7 +93,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -199,7 +199,7 @@ aud_i2s6_idle: aaud-i2s6-idle-pins {
};
&pinctrl_fsys0 {
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -207,7 +207,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -355,7 +355,7 @@ pcie_perst5_in: pcie-perst5-in-pins {
};
&pinctrl_fsys1 {
- gpf8: gpf8 {
+ gpf8: gpf8-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -393,7 +393,7 @@ sd2_bus4: sd2-bus-width4-pins {
};
&pinctrl_fsys2 {
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -401,7 +401,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -409,7 +409,7 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- gpf4: gpf4 {
+ gpf4: gpf4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -417,7 +417,7 @@ gpf4: gpf4 {
#interrupt-cells = <2>;
};
- gpf5: gpf5 {
+ gpf5: gpf5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -425,7 +425,7 @@ gpf5: gpf5 {
#interrupt-cells = <2>;
};
- gpf6: gpf6 {
+ gpf6: gpf6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -499,7 +499,7 @@ eth1_pps_out: eth1-pps-out-pins {
};
&pinctrl_peric0 {
- gpp0: gpp0 {
+ gpp0: gpp0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -507,7 +507,7 @@ gpp0: gpp0 {
#interrupt-cells = <2>;
};
- gpp1: gpp1 {
+ gpp1: gpp1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -515,7 +515,7 @@ gpp1: gpp1 {
#interrupt-cells = <2>;
};
- gpp2: gpp2 {
+ gpp2: gpp2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -523,7 +523,7 @@ gpp2: gpp2 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -833,7 +833,7 @@ uart5_bus_dual: uart5-bus-dual-pins {
};
&pinctrl_peric1 {
- gpp3: gpp3 {
+ gpp3: gpp3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -841,7 +841,7 @@ gpp3: gpp3 {
#interrupt-cells = <2>;
};
- gpp4: gpp4 {
+ gpp4: gpp4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -849,7 +849,7 @@ gpp4: gpp4 {
#interrupt-cells = <2>;
};
- gpp5: gpp5 {
+ gpp5: gpp5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -857,7 +857,7 @@ gpp5: gpp5 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -865,7 +865,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -873,7 +873,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 50 +++++++++---------- 1 file changed, 25 insertions(+), 25 deletions(-)