| Message ID | 1440442594-3102-4-git-send-email-vaibhav.hiremath@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Tue, 25 Aug 2015, Vaibhav Hiremath wrote: > Update header file with required macros for 32KHz buffered clock > output of 88PM800 family of device. > These macros will be used in clk provider driver. > > Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> > --- > include/linux/mfd/88pm80x.h | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h > index 122cfd2..0215d5f 100644 > --- a/include/linux/mfd/88pm80x.h > +++ b/include/linux/mfd/88pm80x.h > @@ -91,6 +91,7 @@ enum { > /* Referance and low power registers */ > #define PM800_LOW_POWER1 (0x20) > #define PM800_LOW_POWER2 (0x21) > +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) Some people add an extra space for register bits, which I quite like. So: #define SOME_REGISTER_ADDRESS 0x123 #define SOME_BIT_VALUE BIT(4) Feel free to use it, or not. > #define PM800_LOW_POWER_CONFIG3 (0x22) > #define PM800_LDOBK_FREEZE BIT(7) > @@ -138,6 +139,13 @@ enum { > #define PM800_ALARM BIT(5) > #define PM800_RTC1_USE_XO BIT(7) > > +#define PM800_32K_OUTX_SEL_MASK 0x3 > +/* 32KHz clk output sel mode */ > +#define PM800_32K_OUTX_SEL_ZERO 0x0 > +#define PM800_32K_OUTX_SEL_INT_32KHZ 0x1 > +#define PM800_32K_OUTX_SEL_XO_32KHZ 0x2 > +#define PM800_32K_OUTX_SEL_HIZ 0x3 > + > /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ > > /* buck registers */ > @@ -208,6 +216,10 @@ enum { > #define PM800_PMOD_MEAS1 0x52 > #define PM800_PMOD_MEAS2 0x53 > > +/* Oscillator control */ > +#define PM800_OSC_CNTRL1 0x50 > +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1) 0x50 goes before 0x52 (and 0x51 if it's there). > #define PM800_GPADC0_MEAS1 0x54 > #define PM800_GPADC0_MEAS2 0x55 > #define PM800_GPADC1_MEAS1 0x56
On Tuesday 25 August 2015 01:25 PM, Lee Jones wrote: > On Tue, 25 Aug 2015, Vaibhav Hiremath wrote: > >> Update header file with required macros for 32KHz buffered clock >> output of 88PM800 family of device. >> These macros will be used in clk provider driver. >> >> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> >> --- >> include/linux/mfd/88pm80x.h | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h >> index 122cfd2..0215d5f 100644 >> --- a/include/linux/mfd/88pm80x.h >> +++ b/include/linux/mfd/88pm80x.h >> @@ -91,6 +91,7 @@ enum { >> /* Referance and low power registers */ >> #define PM800_LOW_POWER1 (0x20) >> #define PM800_LOW_POWER2 (0x21) >> +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) > > Some people add an extra space for register bits, which I quite like. > > So: > > #define SOME_REGISTER_ADDRESS 0x123 > #define SOME_BIT_VALUE BIT(4) > > Feel free to use it, or not. > >> #define PM800_LOW_POWER_CONFIG3 (0x22) >> #define PM800_LDOBK_FREEZE BIT(7) >> @@ -138,6 +139,13 @@ enum { >> #define PM800_ALARM BIT(5) >> #define PM800_RTC1_USE_XO BIT(7) >> >> +#define PM800_32K_OUTX_SEL_MASK 0x3 >> +/* 32KHz clk output sel mode */ >> +#define PM800_32K_OUTX_SEL_ZERO 0x0 >> +#define PM800_32K_OUTX_SEL_INT_32KHZ 0x1 >> +#define PM800_32K_OUTX_SEL_XO_32KHZ 0x2 >> +#define PM800_32K_OUTX_SEL_HIZ 0x3 >> + >> /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ >> >> /* buck registers */ >> @@ -208,6 +216,10 @@ enum { >> #define PM800_PMOD_MEAS1 0x52 >> #define PM800_PMOD_MEAS2 0x53 >> >> +/* Oscillator control */ >> +#define PM800_OSC_CNTRL1 0x50 >> +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1) > > 0x50 goes before 0x52 (and 0x51 if it's there). Will reorder in next version. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 122cfd2..0215d5f 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -91,6 +91,7 @@ enum { /* Referance and low power registers */ #define PM800_LOW_POWER1 (0x20) #define PM800_LOW_POWER2 (0x21) +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) #define PM800_LOW_POWER_CONFIG3 (0x22) #define PM800_LDOBK_FREEZE BIT(7) @@ -138,6 +139,13 @@ enum { #define PM800_ALARM BIT(5) #define PM800_RTC1_USE_XO BIT(7) +#define PM800_32K_OUTX_SEL_MASK 0x3 +/* 32KHz clk output sel mode */ +#define PM800_32K_OUTX_SEL_ZERO 0x0 +#define PM800_32K_OUTX_SEL_INT_32KHZ 0x1 +#define PM800_32K_OUTX_SEL_XO_32KHZ 0x2 +#define PM800_32K_OUTX_SEL_HIZ 0x3 + /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ /* buck registers */ @@ -208,6 +216,10 @@ enum { #define PM800_PMOD_MEAS1 0x52 #define PM800_PMOD_MEAS2 0x53 +/* Oscillator control */ +#define PM800_OSC_CNTRL1 0x50 +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1) + #define PM800_GPADC0_MEAS1 0x54 #define PM800_GPADC0_MEAS2 0x55 #define PM800_GPADC1_MEAS1 0x56
Update header file with required macros for 32KHz buffered clock output of 88PM800 family of device. These macros will be used in clk provider driver. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> --- include/linux/mfd/88pm80x.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)