deleted file mode 100644
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
- +-----+ +-----+
- | dev | | dev |
- +------------------------+ +-----+ +-----+
- | SoC | | |
- | /----|------+--------+
- | +---+ +------+ | child bus A, on first set of pins
- | |I2C|---|Pinmux| |
- | +---+ +------+ | child bus B, on second set of pins
- | \----|------+--------+--------+
- | | | | |
- +------------------------+ +-----+ +-----+ +-----+
- | dev | | dev | | dev |
- +-----+ +-----+ +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
- port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
- bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
- pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
- pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
- pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
- i2cmux {
- compatible = "i2c-mux-pinctrl";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&i2c1>;
-
- pinctrl-names = "ddc", "pta", "idle";
- pinctrl-0 = <&state_i2cmux_ddc>;
- pinctrl-1 = <&state_i2cmux_pta>;
- pinctrl-2 = <&state_i2cmux_idle>;
-
- i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom {
- compatible = "eeprom";
- reg = <0x50>;
- };
- };
-
- i2c@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- eeprom {
- compatible = "eeprom";
- reg = <0x50>;
- };
- };
- };
-
new file mode 100644
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+ - Wolfram Sang <wsa@kernel.org>
+
+description: |
+ This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+ signals, and represents the pin multiplexing configuration using the pinctrl device tree
+ bindings.
+
+ +-----+ +-----+
+ | dev | | dev |
+ +------------------------+ +-----+ +-----+
+ | SoC | | |
+ | /----|------+--------+
+ | +---+ +------+ | child bus A, on first set of pins
+ | |I2C|---|Pinmux| |
+ | +---+ +------+ | child bus B, on second set of pins
+ | \----|------+--------+--------+
+ | | | | |
+ +------------------------+ +-----+ +-----+ +-----+
+ | dev | | dev | | dev |
+ +-----+ +-----+ +-----+
+
+ For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+ I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+ The only exception is that no bus will be created for a state named "idle". If such a state is
+ defined, it must be the last entry in pinctrl-names. For example:
+
+ pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
+ pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
+ pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
+
+ Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+ programmed into hardware.
+
+ If an idle state is defined, whenever an access is not being made to a device on a child bus,
+ the idle pinctrl state will be programmed into hardware.
+
+ If an idle state is not defined, the most recently used pinctrl state will be left programmed
+ into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+ compatible:
+ const: i2c-mux-pinctrl
+
+ i2c-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+ to.
+
+allOf:
+ - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - i2c-parent
+
+examples:
+ - |
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c1>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+ };