@@ -244,6 +244,15 @@ Description:
is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and
u2 are permitted.
+What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/connector
+Date: December 2021
+Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+ Link to the USB Type-C connector when available. This link is
+ only created when USB Type-C Connector Class is enabled, and
+ only if the system firmware is capable of describing the
+ connection between a port and its connector.
+
What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
Date: May 2013
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
@@ -9,6 +9,7 @@
#include <linux/slab.h>
#include <linux/pm_qos.h>
+#include <linux/component.h>
#include "hub.h"
@@ -528,6 +529,32 @@ static void find_and_link_peer(struct usb_hub *hub, int port1)
link_peers_report(port_dev, peer);
}
+static int connector_bind(struct device *dev, struct device *connector, void *data)
+{
+ int ret;
+
+ ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector");
+ if (ret)
+ return ret;
+
+ ret = sysfs_create_link(&connector->kobj, &dev->kobj, dev_name(dev));
+ if (ret)
+ sysfs_remove_link(&dev->kobj, "connector");
+
+ return ret;
+}
+
+static void connector_unbind(struct device *dev, struct device *connector, void *data)
+{
+ sysfs_remove_link(&connector->kobj, dev_name(dev));
+ sysfs_remove_link(&dev->kobj, "connector");
+}
+
+static const struct component_ops connector_ops = {
+ .bind = connector_bind,
+ .unbind = connector_unbind,
+};
+
int usb_hub_create_port_device(struct usb_hub *hub, int port1)
{
struct usb_port *port_dev;
@@ -577,6 +604,10 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
find_and_link_peer(hub, port1);
+ retval = component_add(&port_dev->dev, &connector_ops);
+ if (retval)
+ dev_warn(&port_dev->dev, "failed to add component\n");
+
/*
* Enable runtime pm and hold a refernce that hub_configure()
* will drop once the PM_QOS_NO_POWER_OFF flag state has been set
@@ -619,5 +650,6 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
peer = port_dev->peer;
if (peer)
unlink_peers(port_dev, peer);
+ component_del(&port_dev->dev, &connector_ops);
device_unregister(&port_dev->dev);
}
Creating link to the USB Type-C connector for every new port that is added when possible. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --- Documentation/ABI/testing/sysfs-bus-usb | 9 +++++++ drivers/usb/core/port.c | 32 +++++++++++++++++++++++++ 2 files changed, 41 insertions(+)