| Message ID | a29a038d7ebee931855cbaa065b055db5c5cfef3.1439974219.git.baolin.wang@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Wed, 19 Aug 2015, Baolin Wang wrote: > Integrate with the newly added USB charger interface to limit the current > we draw from the USB input based on the input device configuration > identified by the USB stack, allowing us to charge more quickly from high > current inputs without drawing more current than specified from others. > > Signed-off-by: Mark Brown <broonie@kernel.org> > Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > --- > drivers/power/wm831x_power.c | 69 ++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/wm831x/pdata.h | 3 ++ I'm not going to keep reviewing this. You should carry forward any Acks received onto subsequent submissions yourself. > 2 files changed, 72 insertions(+) > > diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c > index db11ae6..72c661f 100644 > --- a/drivers/power/wm831x_power.c > +++ b/drivers/power/wm831x_power.c > @@ -13,6 +13,7 @@ > #include <linux/platform_device.h> > #include <linux/power_supply.h> > #include <linux/slab.h> > +#include <linux/usb/usb_charger.h> > > #include <linux/mfd/wm831x/core.h> > #include <linux/mfd/wm831x/auxadc.h> > @@ -31,6 +32,8 @@ struct wm831x_power { > char usb_name[20]; > char battery_name[20]; > bool have_battery; > + struct usb_charger *usb_charger; > + struct notifier_block usb_notify; > }; > > static int wm831x_power_check_online(struct wm831x *wm831x, int supply, > @@ -125,6 +128,43 @@ static enum power_supply_property wm831x_usb_props[] = { > POWER_SUPPLY_PROP_VOLTAGE_NOW, > }; > > +/* In miliamps */ > +static unsigned int wm831x_usb_limits[] = { > + 0, > + 2, > + 100, > + 500, > + 900, > + 1500, > + 1800, > + 550, > +}; > + > +static int wm831x_usb_limit_change(struct notifier_block *nb, > + unsigned long limit, void *data) > +{ > + struct wm831x_power *wm831x_power = container_of(nb, > + struct wm831x_power, > + usb_notify); > + int i, best; > + > + /* Find the highest supported limit */ > + best = 0; > + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { > + if (limit < wm831x_usb_limits[i] && > + wm831x_usb_limits[best] < wm831x_usb_limits[i]) > + best = i; > + } > + > + dev_dbg(wm831x_power->wm831x->dev, > + "Limiting USB current to %dmA", wm831x_usb_limits[best]); > + > + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, > + WM831X_USB_ILIM_MASK, best); > + > + return 0; > +} > + > /********************************************************************* > * Battery properties > *********************************************************************/ > @@ -606,8 +646,31 @@ static int wm831x_power_probe(struct platform_device *pdev) > } > } > > + if (wm831x_pdata && wm831x_pdata->usb_gadget) { > + power->usb_charger = > + usb_charger_find_by_name(wm831x_pdata->usb_gadget); > + if (IS_ERR(power->usb_charger)) { > + ret = PTR_ERR(power->usb_charger); > + dev_err(&pdev->dev, > + "Failed to find USB gadget: %d\n", ret); > + goto err_bat_irq; > + } > + > + power->usb_notify.notifier_call = wm831x_usb_limit_change; > + > + ret = usb_charger_register_notify(power->usb_charger, > + &power->usb_notify); > + if (ret != 0) { > + dev_err(&pdev->dev, > + "Failed to register notifier: %d\n", ret); > + goto err_usb_charger; > + } > + } > + > return ret; > > +err_usb_charger: > + usb_charger_put(power->usb_charger); > err_bat_irq: > --i; > for (; i >= 0; i--) { > @@ -637,6 +700,12 @@ static int wm831x_power_remove(struct platform_device *pdev) > struct wm831x *wm831x = wm831x_power->wm831x; > int irq, i; > > + if (wm831x_power->usb_charger) { > + usb_charger_unregister_notify(wm831x_power->usb_charger, > + &wm831x_power->usb_notify); > + usb_charger_put(wm831x_power->usb_charger); > + } > + > for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { > irq = wm831x_irq(wm831x, > platform_get_irq_byname(pdev, > diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h > index dcc9631..5af8399 100644 > --- a/include/linux/mfd/wm831x/pdata.h > +++ b/include/linux/mfd/wm831x/pdata.h > @@ -126,6 +126,9 @@ struct wm831x_pdata { > /** The driver should initiate a power off sequence during shutdown */ > bool soft_shutdown; > > + /** dev_name of USB charger gadget to integrate with */ > + const char *usb_gadget; > + > int irq_base; > int gpio_base; > int gpio_defaults[WM831X_GPIO_NUM];
On 19 August 2015 at 17:56, Lee Jones <lee.jones@linaro.org> wrote: > On Wed, 19 Aug 2015, Baolin Wang wrote: > >> Integrate with the newly added USB charger interface to limit the current >> we draw from the USB input based on the input device configuration >> identified by the USB stack, allowing us to charge more quickly from high >> current inputs without drawing more current than specified from others. >> >> Signed-off-by: Mark Brown <broonie@kernel.org> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> >> --- >> drivers/power/wm831x_power.c | 69 ++++++++++++++++++++++++++++++++++++++ >> include/linux/mfd/wm831x/pdata.h | 3 ++ > > I'm not going to keep reviewing this. You should carry forward any > Acks received onto subsequent submissions yourself. > OK, thanks. >> 2 files changed, 72 insertions(+) >> >> diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c >> index db11ae6..72c661f 100644 >> --- a/drivers/power/wm831x_power.c >> +++ b/drivers/power/wm831x_power.c >> @@ -13,6 +13,7 @@ >> #include <linux/platform_device.h> >> #include <linux/power_supply.h> >> #include <linux/slab.h> >> +#include <linux/usb/usb_charger.h> >> >> #include <linux/mfd/wm831x/core.h> >> #include <linux/mfd/wm831x/auxadc.h> >> @@ -31,6 +32,8 @@ struct wm831x_power { >> char usb_name[20]; >> char battery_name[20]; >> bool have_battery; >> + struct usb_charger *usb_charger; >> + struct notifier_block usb_notify; >> }; >> >> static int wm831x_power_check_online(struct wm831x *wm831x, int supply, >> @@ -125,6 +128,43 @@ static enum power_supply_property wm831x_usb_props[] = { >> POWER_SUPPLY_PROP_VOLTAGE_NOW, >> }; >> >> +/* In miliamps */ >> +static unsigned int wm831x_usb_limits[] = { >> + 0, >> + 2, >> + 100, >> + 500, >> + 900, >> + 1500, >> + 1800, >> + 550, >> +}; >> + >> +static int wm831x_usb_limit_change(struct notifier_block *nb, >> + unsigned long limit, void *data) >> +{ >> + struct wm831x_power *wm831x_power = container_of(nb, >> + struct wm831x_power, >> + usb_notify); >> + int i, best; >> + >> + /* Find the highest supported limit */ >> + best = 0; >> + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { >> + if (limit < wm831x_usb_limits[i] && >> + wm831x_usb_limits[best] < wm831x_usb_limits[i]) >> + best = i; >> + } >> + >> + dev_dbg(wm831x_power->wm831x->dev, >> + "Limiting USB current to %dmA", wm831x_usb_limits[best]); >> + >> + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, >> + WM831X_USB_ILIM_MASK, best); >> + >> + return 0; >> +} >> + >> /********************************************************************* >> * Battery properties >> *********************************************************************/ >> @@ -606,8 +646,31 @@ static int wm831x_power_probe(struct platform_device *pdev) >> } >> } >> >> + if (wm831x_pdata && wm831x_pdata->usb_gadget) { >> + power->usb_charger = >> + usb_charger_find_by_name(wm831x_pdata->usb_gadget); >> + if (IS_ERR(power->usb_charger)) { >> + ret = PTR_ERR(power->usb_charger); >> + dev_err(&pdev->dev, >> + "Failed to find USB gadget: %d\n", ret); >> + goto err_bat_irq; >> + } >> + >> + power->usb_notify.notifier_call = wm831x_usb_limit_change; >> + >> + ret = usb_charger_register_notify(power->usb_charger, >> + &power->usb_notify); >> + if (ret != 0) { >> + dev_err(&pdev->dev, >> + "Failed to register notifier: %d\n", ret); >> + goto err_usb_charger; >> + } >> + } >> + >> return ret; >> >> +err_usb_charger: >> + usb_charger_put(power->usb_charger); >> err_bat_irq: >> --i; >> for (; i >= 0; i--) { >> @@ -637,6 +700,12 @@ static int wm831x_power_remove(struct platform_device *pdev) >> struct wm831x *wm831x = wm831x_power->wm831x; >> int irq, i; >> >> + if (wm831x_power->usb_charger) { >> + usb_charger_unregister_notify(wm831x_power->usb_charger, >> + &wm831x_power->usb_notify); >> + usb_charger_put(wm831x_power->usb_charger); >> + } >> + >> for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { >> irq = wm831x_irq(wm831x, >> platform_get_irq_byname(pdev, >> diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h >> index dcc9631..5af8399 100644 >> --- a/include/linux/mfd/wm831x/pdata.h >> +++ b/include/linux/mfd/wm831x/pdata.h >> @@ -126,6 +126,9 @@ struct wm831x_pdata { >> /** The driver should initiate a power off sequence during shutdown */ >> bool soft_shutdown; >> >> + /** dev_name of USB charger gadget to integrate with */ >> + const char *usb_gadget; >> + >> int irq_base; >> int gpio_base; >> int gpio_defaults[WM831X_GPIO_NUM]; > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog
On 20 August 2015 at 00:24, Mark Brown <broonie@kernel.org> wrote: > On Wed, Aug 19, 2015 at 05:13:48PM +0800, Baolin Wang wrote: >> Integrate with the newly added USB charger interface to limit the current >> we draw from the USB input based on the input device configuration >> identified by the USB stack, allowing us to charge more quickly from high >> current inputs without drawing more current than specified from others. >> >> Signed-off-by: Mark Brown <broonie@kernel.org> >> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> > > When people (like Charles and Lee have) have reviewed a change you > should add any tags they gave when you resend the change so they don't > have to duplicate their work and other people know that the review has > happened. Make sense. Thanks.
diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c index db11ae6..72c661f 100644 --- a/drivers/power/wm831x_power.c +++ b/drivers/power/wm831x_power.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/slab.h> +#include <linux/usb/usb_charger.h> #include <linux/mfd/wm831x/core.h> #include <linux/mfd/wm831x/auxadc.h> @@ -31,6 +32,8 @@ struct wm831x_power { char usb_name[20]; char battery_name[20]; bool have_battery; + struct usb_charger *usb_charger; + struct notifier_block usb_notify; }; static int wm831x_power_check_online(struct wm831x *wm831x, int supply, @@ -125,6 +128,43 @@ static enum power_supply_property wm831x_usb_props[] = { POWER_SUPPLY_PROP_VOLTAGE_NOW, }; +/* In miliamps */ +static unsigned int wm831x_usb_limits[] = { + 0, + 2, + 100, + 500, + 900, + 1500, + 1800, + 550, +}; + +static int wm831x_usb_limit_change(struct notifier_block *nb, + unsigned long limit, void *data) +{ + struct wm831x_power *wm831x_power = container_of(nb, + struct wm831x_power, + usb_notify); + int i, best; + + /* Find the highest supported limit */ + best = 0; + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { + if (limit < wm831x_usb_limits[i] && + wm831x_usb_limits[best] < wm831x_usb_limits[i]) + best = i; + } + + dev_dbg(wm831x_power->wm831x->dev, + "Limiting USB current to %dmA", wm831x_usb_limits[best]); + + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, + WM831X_USB_ILIM_MASK, best); + + return 0; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -606,8 +646,31 @@ static int wm831x_power_probe(struct platform_device *pdev) } } + if (wm831x_pdata && wm831x_pdata->usb_gadget) { + power->usb_charger = + usb_charger_find_by_name(wm831x_pdata->usb_gadget); + if (IS_ERR(power->usb_charger)) { + ret = PTR_ERR(power->usb_charger); + dev_err(&pdev->dev, + "Failed to find USB gadget: %d\n", ret); + goto err_bat_irq; + } + + power->usb_notify.notifier_call = wm831x_usb_limit_change; + + ret = usb_charger_register_notify(power->usb_charger, + &power->usb_notify); + if (ret != 0) { + dev_err(&pdev->dev, + "Failed to register notifier: %d\n", ret); + goto err_usb_charger; + } + } + return ret; +err_usb_charger: + usb_charger_put(power->usb_charger); err_bat_irq: --i; for (; i >= 0; i--) { @@ -637,6 +700,12 @@ static int wm831x_power_remove(struct platform_device *pdev) struct wm831x *wm831x = wm831x_power->wm831x; int irq, i; + if (wm831x_power->usb_charger) { + usb_charger_unregister_notify(wm831x_power->usb_charger, + &wm831x_power->usb_notify); + usb_charger_put(wm831x_power->usb_charger); + } + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index dcc9631..5af8399 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -126,6 +126,9 @@ struct wm831x_pdata { /** The driver should initiate a power off sequence during shutdown */ bool soft_shutdown; + /** dev_name of USB charger gadget to integrate with */ + const char *usb_gadget; + int irq_base; int gpio_base; int gpio_defaults[WM831X_GPIO_NUM];