| Message ID | 1439903212-19931-1-git-send-email-srinivas.kandagatla@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On 25/08/15 22:33, Stephen Boyd wrote: > On 08/18/2015 06:06 AM, Srinivas Kandagatla wrote: >> @@ -10,6 +11,20 @@ >> serial1 = &gsbi6_serial; >> }; >> + pwrseq { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; > > Why do we need any of these three properties? > Yep, you are right I will remove it and give it a try. >> + compatible = "simple-bus"; >> + >> + sdcc4_pwrseq: sdcc4_pwrseq { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&wlan_default_gpios>; >> + compatible = "mmc-pwrseq-simple"; >> + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; > > Especially because this node doesn't have a reg property. > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 88d6655..b1f9ddb 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,5 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -10,6 +11,20 @@ serial1 = &gsbi6_serial; }; + pwrseq { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -206,6 +221,21 @@ status = "okay"; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -227,6 +257,7 @@ status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; };
This patch adds pwrseq for WLAN which resets the WLAN just before the SDIO bus is up. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 31 ++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)