diff mbox series

can: m_can: Disable and ignore ELO interrupt

Message ID 20211211213011.813419-1-mkl@pengutronix.de
State New
Headers show
Series can: m_can: Disable and ignore ELO interrupt | expand

Commit Message

Marc Kleine-Budde Dec. 11, 2021, 9:30 p.m. UTC 
From: Brian Silverman <brian.silverman@bluerivertech.com>

Commit f58ac1adc76b5beda43c64ef359056077df4d93a upstream.

With the design of this driver, this condition is often triggered.
However, the counter that this interrupt indicates an overflow is never
read either, so overflowing is harmless.

On my system, when a CAN bus starts flapping up and down, this locks up
the whole system with lots of interrupts and printks.

Specifically, this interrupt indicates the CEL field of ECR has
overflowed. All reads of ECR mask out CEL.

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com
Cc: stable@vger.kernel.org
Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
Hey Greg,

this is
| f58ac1adc76b ("can: m_can: Disable and ignore ELO interrupt")
checrry picked onto v5.10. The patch applied without any problems,
won't know why it didn't work in your side.

regards,
Marc

 drivers/net/can/m_can/m_can.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 62bcef4bb95f..19a7e4adb933 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -207,15 +207,15 @@  enum m_can_reg {
 
 /* Interrupts for version 3.0.x */
 #define IR_ERR_LEC_30X	(IR_STE	| IR_FOE | IR_ACKE | IR_BE | IR_CRCE)
-#define IR_ERR_BUS_30X	(IR_ERR_LEC_30X | IR_WDI | IR_ELO | IR_BEU | \
-			 IR_BEC | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | \
-			 IR_RF1L | IR_RF0L)
+#define IR_ERR_BUS_30X	(IR_ERR_LEC_30X | IR_WDI | IR_BEU | IR_BEC | \
+			 IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L | \
+			 IR_RF0L)
 #define IR_ERR_ALL_30X	(IR_ERR_STATE | IR_ERR_BUS_30X)
 /* Interrupts for version >= 3.1.x */
 #define IR_ERR_LEC_31X	(IR_PED | IR_PEA)
-#define IR_ERR_BUS_31X      (IR_ERR_LEC_31X | IR_WDI | IR_ELO | IR_BEU | \
-			 IR_BEC | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | \
-			 IR_RF1L | IR_RF0L)
+#define IR_ERR_BUS_31X      (IR_ERR_LEC_31X | IR_WDI | IR_BEU | IR_BEC | \
+			 IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L | \
+			 IR_RF0L)
 #define IR_ERR_ALL_31X	(IR_ERR_STATE | IR_ERR_BUS_31X)
 
 /* Interrupt Line Select (ILS) */
@@ -752,8 +752,6 @@  static void m_can_handle_other_err(struct net_device *dev, u32 irqstatus)
 {
 	if (irqstatus & IR_WDI)
 		netdev_err(dev, "Message RAM Watchdog event due to missing READY\n");
-	if (irqstatus & IR_ELO)
-		netdev_err(dev, "Error Logging Overflow\n");
 	if (irqstatus & IR_BEU)
 		netdev_err(dev, "Bit Error Uncorrected\n");
 	if (irqstatus & IR_BEC)