diff mbox series

[4.4,25/37] net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()

Message ID 20211213092926.198346538@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Dec. 13, 2021, 9:30 a.m. UTC 
From: Joakim Zhang <qiangqing.zhang@nxp.com>

commit b5bd95d17102b6719e3531d627875b9690371383 upstream.

Background:
We have a customer is running a Profinet stack on the 8MM which receives and
responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from
time to time the received PNIO-CM package is "stock" and is only handled when
receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and
the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from
the expected 40 ms and not the 2s delay of the DCERPC-Ping).

After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would
be handled by different RX queues.

The root cause should be driver ack all queues' interrupt when handle a
specific queue in fec_enet_rx_queue(). The blamed patch is introduced to
receive as much packets as possible once to avoid interrupt flooding.
But it's unreasonable to clear other queues'interrupt when handling one
queue, this patch tries to fix it.

Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet)
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/fec.h      |    3 +++
 drivers/net/ethernet/freescale/fec_main.c |    2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -360,6 +360,9 @@  struct bufdesc_ex {
 #define FEC_ENET_WAKEUP	((uint)0x00020000)	/* Wakeup request */
 #define FEC_ENET_TXF	(FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2)
 #define FEC_ENET_RXF	(FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2)
+#define FEC_ENET_RXF_GET(X)	(((X) == 0) ? FEC_ENET_RXF_0 :	\
+				(((X) == 1) ? FEC_ENET_RXF_1 :	\
+				FEC_ENET_RXF_2))
 #define FEC_ENET_TS_AVAIL       ((uint)0x00010000)
 #define FEC_ENET_TS_TIMER       ((uint)0x00008000)
 
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1407,7 +1407,7 @@  fec_enet_rx_queue(struct net_device *nde
 		if ((status & BD_ENET_RX_LAST) == 0)
 			netdev_err(ndev, "rcv is not +last\n");
 
-		writel(FEC_ENET_RXF, fep->hwp + FEC_IEVENT);
+		writel(FEC_ENET_RXF_GET(queue_id), fep->hwp + FEC_IEVENT);
 
 		/* Check for errors. */
 		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |