@@ -922,12 +922,6 @@ static MemTxResult gic_dist_write(void *opaque, hwaddr offset, uint64_t data,
}
}
-static const MemoryRegionOps gic_dist_ops = {
- .read_with_attrs = gic_dist_read,
- .write_with_attrs = gic_dist_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
uint64_t *data, MemTxAttrs attrs)
{
@@ -1056,10 +1050,17 @@ static MemTxResult gic_do_cpu_write(void *opaque, hwaddr addr,
return gic_cpu_write(s, id, addr, value, attrs);
}
-static const MemoryRegionOps gic_thiscpu_ops = {
- .read_with_attrs = gic_thiscpu_read,
- .write_with_attrs = gic_thiscpu_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
+static const MemoryRegionOps gic_ops[2] = {
+ {
+ .read_with_attrs = gic_dist_read,
+ .write_with_attrs = gic_dist_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ },
+ {
+ .read_with_attrs = gic_thiscpu_read,
+ .write_with_attrs = gic_thiscpu_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ }
};
static const MemoryRegionOps gic_cpu_ops = {
@@ -1068,31 +1069,10 @@ static const MemoryRegionOps gic_cpu_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
+/* This function is used by nvic model */
void gic_init_irqs_and_distributor(GICState *s)
{
- SysBusDevice *sbd = SYS_BUS_DEVICE(s);
- int i;
-
- i = s->num_irq - GIC_INTERNAL;
- /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
- * GPIO array layout is thus:
- * [0..N-1] SPIs
- * [N..N+31] PPIs for CPU 0
- * [N+32..N+63] PPIs for CPU 1
- * ...
- */
- if (s->revision != REV_NVIC) {
- i += (GIC_INTERNAL * s->num_cpu);
- }
- qdev_init_gpio_in(DEVICE(s), gic_set_irq, i);
- for (i = 0; i < NUM_CPU(s); i++) {
- sysbus_init_irq(sbd, &s->parent_irq[i]);
- }
- for (i = 0; i < NUM_CPU(s); i++) {
- sysbus_init_irq(sbd, &s->parent_fiq[i]);
- }
- memory_region_init_io(&s->iomem, OBJECT(s), &gic_dist_ops, s,
- "gic_dist", 0x1000);
+ gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops);
}
static void arm_gic_realize(DeviceState *dev, Error **errp)
@@ -1110,28 +1090,22 @@ static void arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- gic_init_irqs_and_distributor(s);
+ /* This creates distributor and main CPU interface (s->cpuiomem[0]) */
+ gic_init_irqs_and_mmio(s, gic_set_irq, gic_ops);
- /* Memory regions for the CPU interfaces (NVIC doesn't have these):
- * a region for "CPU interface for this core", then a region for
- * "CPU interface for core 0", "for core 1", ...
+ /* Extra core-specific regions for the CPU interfaces. This is
+ * necessary for "franken-GIC" implementations, for example on
+ * Exynos 4.
* NB that the memory region size of 0x100 applies for the 11MPCore
* and also cores following the GIC v1 spec (ie A9).
* GIC v2 defines a larger memory region (0x1000) so this will need
* to be extended when we implement A15.
*/
- memory_region_init_io(&s->cpuiomem[0], OBJECT(s), &gic_thiscpu_ops, s,
- "gic_cpu", 0x100);
for (i = 0; i < NUM_CPU(s); i++) {
s->backref[i] = s;
memory_region_init_io(&s->cpuiomem[i+1], OBJECT(s), &gic_cpu_ops,
&s->backref[i], "gic_cpu", 0x100);
- }
- /* Distributor */
- sysbus_init_mmio(sbd, &s->iomem);
- /* cpu interfaces (one for "current cpu" plus one per cpu) */
- for (i = 0; i <= NUM_CPU(s); i++) {
- sysbus_init_mmio(sbd, &s->cpuiomem[i]);
+ sysbus_init_mmio(sbd, &s->cpuiomem[i+1]);
}
}
@@ -84,6 +84,47 @@ static const VMStateDescription vmstate_gic = {
}
};
+void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(s);
+ int i = s->num_irq - GIC_INTERNAL;
+
+ /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
+ * GPIO array layout is thus:
+ * [0..N-1] SPIs
+ * [N..N+31] PPIs for CPU 0
+ * [N+32..N+63] PPIs for CPU 1
+ * ...
+ */
+ if (s->revision != REV_NVIC) {
+ i += (GIC_INTERNAL * s->num_cpu);
+ }
+ qdev_init_gpio_in(DEVICE(s), handler, i);
+
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_irq[i]);
+ }
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_fiq[i]);
+ }
+
+ /* Distributor */
+ memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+
+ if (s->revision != REV_NVIC) {
+ /* This is the main CPU interface "for this core". It is always
+ * present because it is required by both software emulation and KVM.
+ * NVIC is not handled here because its CPU interface is different,
+ * neither it can use KVM.
+ */
+ memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
+ s, "gic_cpu", s->revision == 2 ? 0x1000 : 0x100);
+ sysbus_init_mmio(sbd, &s->cpuiomem[0]);
+ }
+}
+
static void arm_gic_common_realize(DeviceState *dev, Error **errp)
{
GICState *s = ARM_GIC_COMMON(dev);
@@ -543,7 +543,6 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
{
int i;
GICState *s = KVM_ARM_GIC(dev);
- SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s);
Error *local_err = NULL;
int ret;
@@ -560,32 +559,13 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
return;
}
- i = s->num_irq - GIC_INTERNAL;
- /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
- * GPIO array layout is thus:
- * [0..N-1] SPIs
- * [N..N+31] PPIs for CPU 0
- * [N+32..N+63] PPIs for CPU 1
- * ...
- */
- i += (GIC_INTERNAL * s->num_cpu);
- qdev_init_gpio_in(dev, kvm_arm_gic_set_irq, i);
+ gic_init_irqs_and_mmio(s, kvm_arm_gic_set_irq, NULL);
for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
qemu_irq irq = qdev_get_gpio_in(dev, i);
kvm_irqchip_set_qemuirq_gsi(kvm_state, irq, i);
}
- /* We never use our outbound IRQ/FIQ lines but provide them so that
- * we maintain the same interface as the non-KVM GIC.
- */
- for (i = 0; i < s->num_cpu; i++) {
- sysbus_init_irq(sbd, &s->parent_irq[i]);
- }
- for (i = 0; i < s->num_cpu; i++) {
- sysbus_init_irq(sbd, &s->parent_fiq[i]);
- }
-
/* Try to create the device via the device control API */
s->dev_fd = -1;
ret = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V2, false);
@@ -609,9 +589,6 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
}
/* Distributor */
- memory_region_init_reservation(&s->iomem, OBJECT(s),
- "kvm-gic_dist", 0x1000);
- sysbus_init_mmio(sbd, &s->iomem);
kvm_arm_register_device(&s->iomem,
(KVM_ARM_DEVICE_VGIC_V2 << KVM_ARM_DEVICE_ID_SHIFT)
| KVM_VGIC_V2_ADDR_TYPE_DIST,
@@ -622,9 +599,6 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
* provide the "interface for core #N" memory regions, because
* cores with a VGIC don't have those.
*/
- memory_region_init_reservation(&s->cpuiomem[0], OBJECT(s),
- "kvm-gic_cpu", 0x1000);
- sysbus_init_mmio(sbd, &s->cpuiomem[0]);
kvm_arm_register_device(&s->cpuiomem[0],
(KVM_ARM_DEVICE_VGIC_V2 << KVM_ARM_DEVICE_ID_SHIFT)
| KVM_VGIC_V2_ADDR_TYPE_CPU,
@@ -138,4 +138,7 @@ typedef struct ARMGICCommonClass {
void (*post_load)(GICState *s);
} ARMGICCommonClass;
+void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops);
+
#endif